Kenmore 501-80002 User manual

3828EL3006J

Safety Instructions 3

Installation Instructions 5

Exhaust Requirements And Maintenance 10

Appearance And Design 12

Operating Your Dryer 13

Additional Functions 16

Caring For Your Dryer 17

Additional Tips For Smart Use 20

Troubleshooting Guide 22

Technical Data 26

Warranty 27

Ultra Big Capacity Drum

The Kenmore Dryer has a large capacity.

Reduced drying time

Drying time is shortened by efficient air flow mechanism and

optimized heater.

Innovative Noise Reduction

Noise is reduced by optimized design of air flow system and

vibration reduction technology.

Ease of Use

Large LED display and electronic control.

Your dryer provides sensor drying and manual drying programs.

Sensor Dry Dryer electronically senses laundry moisture level and it automatically determines operation time

based on the dryness of the load and the selected program. At times,you can see sudden increase or

decrease of operation time. It happens because a sensor will detect laundry humidity with a certain period.

Sudden change of operation time is not a malfunction.

Manual Dry Manual Dry allows you to set operation time manually to complete drying. Or use Manual Dry if

clothes are still damp after sensor dry cycle is finished. Manual Dry is more effective for heavyweight and bulky

items such as king-size bed sheets and thick work clothes.

What are Sensor Dry and Manual Dry?

ontents

eatures

Safety Instructions

afety Instructions

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

1)Read all instructions before using the appliance.

2)Do not dry articles that have come into contact with

gasoline, dry-cleaning solvents, or other flammable

or explosive substances, as they give off vapors

that could ignite or explode.

)Do not allow children to play on or in the appliance.

Close supervision of children is necessary when

using the appliance.

4)Before the appliance is removed from service or

discarded, remove the door to the drying

compartment.

5)Do not reach into the appliance if the drum is

rotating.

6)Do not install or store this appliance where it will be

exposed to the weather.

7)Do not tamper the with the controls.

8)Do not repair or replace any part of the appliance or

attempt any servicing unless specifically

recommended in the user-maintenance instructions.

9)Do not use heat to dry articles containing foam

rubber or similarly textured rubber-like materials.

10)Clean lint screen before or after each load.

11) Keep area around the exhaust opening and

adjacent surrounding areas free from the

accumulation of lint, dust, and dirt.

12)The interior of the appliance and exhaust duct

should be cleaned periodically by qualified service

personnel.

1 )Do not place items exposed to cooking oils in your

dryer. Items contaminated with cooking oils may

contribute to a chemical reaction that could cause

a load to catch fire.

14)Do not use fabric softners or products to eliminate

static unless recommended by the manufacturer of

the fabric softner or product.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of

malfunction or breakdown, grounding will reduce the

risk of electric shock by providing a path of least

resistance for electric current. This appliance is

equipped with a cord having an equipment-grounding

conductor and a grounding plug. The plug must be

plugged into an appropriate outlet that is properly

installed and grounded in accordance with all local

codes and ordinances.

WARNING - Improper connection of the equipment-

grounding conductor can result in a risk of electric

shock. Check with a qualified electrician or service

person if you are in doubt as to whether the appliance

is properly grounded.

Do not modify the plug provided with the appliance: if

it will not fit the outlet, have a proper outlet installed by

a qualified electrician.

This appliance must be connected to a grounded

metal, permanent wiring system or an equipment-

grounding conductor must be run with the circuit

conductors and connected to the equipment-

grounding terminal or lead on the appliance.

WARNING!

To help reduce any risk of electric shock, fire, or other personal injury or property

damage when using your dryer, please exercise care and follow basic safety

precautions, including the following:

Safety Instructions

afety Instructions

To reduce the risk of fire or explosion, electric

shock, property damage, personal injury, or death

when using this appliance, please follow all

instructions and information, including those in

this manual and instructions provided by your

gas supplier.

• Do not store or use any gasoline, dry-cleaning

solvents any other flammable vapors or

liquids in the area surrounding this appliance.

• Do not dry anything that has ever had anything

flammable on it, even after washing.

• No washer can completely remove oil. Do not

dry any articles that have ever had any kind of

oil on them, including cooking oil.

• Articles containing foam, rubber, rubber-like

materials, plastic or similar materials should be

air dried.

• Failure to follow these instructions can result in

fire, death or serious injury.

• A qualified service person or company must

perform installation and service of this

appliance.

WARNING!

• Keep flammable materials and vapors, such

as gasoline, away from dryer.

• Place dryer at least 18 inches above the floor

for a garage installation.

• Failure to do so can result in death,

explosion or fire.

WARNING

Installation Instructions

Closet door

ventilation

hole

Closet side view

24″

(155 ㎠)

0″ 0″

48″

(310 ㎠)

3.0″

(7.6 ㎝)

2.9″

(7.4 ㎝)

1″

(2.54 ㎝)

1″

(2.54 ㎝)

24.4″

(62.0 ㎝)

Closet Front view

23.6″

(60.0 ㎝)

26.4″

(65.0 ㎝)

33.5″

(85.0 ㎝)

23.6″

(60.0 ㎝)

(0 ㎝) (0 ㎝)

nstallation Instructions

Built in

The following instructions will help guide you through the initial steps of setting up your dryer for use.

Please note that every section of this manual provides important information regarding the preparation

and use of your dryer, and it is important that you review this entire manual before proceeding with any

installation or use. More detailed instructions concerning electrical connections, gas connections, and

exhaust requirements are provided in other parts of this manual.

Choose a location with a solid floor for your dryer.

Place the dryer at least eighteen inches above the

floor for a garage installation. After placing the

dryer in the desired location, please make sure that

it has the required clearances shown below and

sections on Exhaust and Maintenance requirements,

page10.

Certain minimum clearances are required

above, behind, and to the sides of the unit, as

shown below.Those required minimum clearances

are set forth in the picture below. Please keep the

following instructions in mind when installing in a

closet or recessed area:

• Consider allowing additional clearance for

installation and servicing.

• Wall, door, and floor molding may force additional

clearances.

• An additional inch of clearance is recommended to

minimize noise transfer .

• Consider space needed for companion appliances.

• For closet installations, the picture below shows the

minimum required ventilation openings for the door.

A louvered door with comparable ventilation openings

is also acceptable.

STEP 1 Positioning the Dryer.

Leveling legs should be secured.

All four legs are stably placed on the solid and

even floor.

If dryer is not level, laundry may not tumble

properly and sensor will not detect the accurate

humidity information.

When leveling, please be cautious not to injure

your fingers and toes.

Note

* Most installations require a minimum 5 1/2 in.

(14 cm) clearance behind the dryer for the exhaust

vent with elbow.

Installation Instructions

1. Remove Duct Connector.

2. Remove the right (or left) Side Cap by (-) driver.

3. Assemble the Duct Connector to the hole and

close the back hole by the Side Cap.

• PLEASE BE AWARE THAT FAILURE TO

EXHAUST THE DRYER CORRECTLY WILL

VOID THE DRYER’S WARRANTY.

To change duct direction, follow these steps.

Duct Connector

Side Cap

nstallation Instructions

In addition to the following warnings, please refer to

manual section on Exhaust Requirements and

Maintenance, page 10.

IMPORTANT: To reduce the risk of fire, combustion,

and gas accumulation, the dryer must be vented to the

outdoors. Please follow the instructions (and all

others in this manual) very carefully.

WARNING!

• Use a heavy metal vent.

• Do not use plastic or thin foil duct.

• Failure to follow these instructions can

result in death or fire.

• Clean old ducts before installing this dryer

STEP 2 Connecting the Exhaust

and Venting System.

Vent end will face to the outside home and

improper taping and unstable installation of vent

will cause undesirable drying performance.

Note

• Do not use Plastic or thin foil duct.

• Use 4" (10.2 cm) diameter rigid or Semi-rigid

metal duct (note: venting materials are not

supplied with the dryer, and you should obtain the

venting materials necessary for proper installation)

• Position the Dryer so that the exhaust duct run is

as short as possible.

• Clean old ducts before installing this dryer

• The male end of each section of exhaust duct must

point away from the dryer

• Use as few elbow joints as possible.

• Use duct tape on all duct joints

• Insulate ductwork that runs through unheated

areas in order to reduce condensation and lint

build-up on pipe walls.

During transportation side cap can come out slightly.

If that is so, push and fit it to the hole to prevent

possible lint leakage.

Note

Installation Instructions

Close the door to the dryer drum/drying

compartment and, after completing all steps in this

manual for proper installation of this dryer, start the

dryer on a heat setting, as described more fully in

the operating instructions that accompany the dryer.

The exhaust air or the exhaust pipe should be warm

after the dryer has been operating for three minutes.

The following instructions are applicable to

installations of the dryer in a manufactured or mobile

home. If you are uncertain whether your proposed

installation will comply with these standards, please

contact a service and installation professional for

assistance.

Following are several warnings and instructions

concerning making the electrical connection for

electric dryers.

The following instructions apply to any installation

of the dryer in a manufactured or mobile home:

1) Electric dryers may be vented to the outside

using the back, left, or right.

2) The dryer exhaust duct must be affixed securely

to the manufactured or mobile home structure,

and the exhaust duct must be made of a material

that will resist fire and combustion, and it is

recommended that you use a rigid or flexible

metal pipe.

3) Make sure the dryer has adequate access to

outside fresh air to ensure proper operation. The

opening for outside fresh air must be at least 25 in²

(163㎠)

4) It is important that the clearance of the duct from

any combustible construction be at least 2 inches

(5 cm), and, when venting the dryer to the

outdoors, the dryer can be installed with a

clearances of 1 inch (2.5 cm) at the sides and back

of the dryer.

5) DO NOT connect the exhaust duct with any other

duct, vent, chimney, or other exhaust duct.

6) Make sure the dryer has adequate access to outside

fresh air to ensure proper operation. The opening

for outside fresh air must be at least 25 in²(163㎠).

7) Please be aware that venting materials are not

supplied with the dryer. You should obtain the

venting materials necessary for proper installation.

Use power supply (Socket) rated 240Volts, 30

ampere.

nstallation Instructions

Prior to the first use of this appliance, use all-

purpose cleaning products or a solution of detergent

and water, with damp cloth to remove from the

inside of the dryer drum/drying compartment any

dust or dirt that may have accumulated inside the

dryer. Plug-in your dryer after reviewing the

following parts on your dryer’s Electrical

Requirements.

STEP 4

Preparation of the Dryer.

STEP 3 Electrical Plug Connections

STEP 5 Confirming Heat Source

Operation

STEP 6 Additional Instructions

for Installation of Your

Dryer in a Manufactured

or Mobile Home

WARNING!

DO NOT connect exhaust ducts with

metal screws or fasteners that extend

into the duct.

WARNING!

DO NOT vent the exhaust duct under the

manufactured or mobile home.

WARNING!

󳢯Do not plug with several other appliances power cord.

󳢯Do not grasp power cord or switch with wet hands.

󳢯Do not use damaged power cord, plug, and socket.

Installation Instructions

Stacking Kit

In order to stack this dryer on an Kenmore

washing machine(40002), an Kenmore stacking

kit is needed.

Installation Procedure

1. Place the Kenmore dryer on the Kenmore

Washing machine(40002).

2. Unscrew Rear cover in the Base by unscrewing

2 screws.

3. After detaching protection sheet of double-side

tape, align stacking kit holes rear cover holes

and then attach tape to the washer by pressing

hard.

4. Assemble a stacking kit as following.

• Screw 2 screws which is unscrewed earlier to

assemble dryer rear back and stacking kit.( )

• Use accessory screws to assemble washer rear cover

and stacking kit. ( , )

• The procedure for the opposite side will be the

same.

nstallation Instructions

WARNING!

Incorrect installation can cause serious

accidents.

The weight of the dryer and the height of

installation makes the stacking procedure

too risky for one person. This procedure

should be performed by 2 or more

experienced service personnel.

Installation Instructions

1. Leveling the dryer is to prevent undesirable

noise and vibration.

2. Place your dryer in a solid and level area

where water is not dripping or freezing.

2. If the dryer is not properly level, adjust the

levelling legs up and down as necessary.

2. Turn them clockwise to raise and

counterclockwise to lower until the dryer is not

wobbling both front-to-back and side-to-side.

󳢬

Diagonal Check

󳢬

When pushing down the edges of the machine, the

machine should not move up and down at all. (Please,

check both directions) If machine rocks when pushing

the machine top plate diagonally, adjust the feet again.

Level the dryer

nstallation Instructions

xhaust Requirements And Maintenance

Exhaust Requirements And Maintenance

Following are important instructions and information concerning the exhaust requirements for your dryer.

Important Warning: To reduce the risk of fire, combustion, or accumulation of combustible gases, DO

NOT exhaust dryer air into an enclosed and unventilated area, such as an attic, wall, ceiling, crawl space,

chimney, gas vent, or concealed space of a building. To reduce the risk of fire, DO NOT exhaust the dryer with

plastic or thin foil ducting.

Exhaust Requirements and Instructions:

1. Venting materials are not provided with the dryer and

you should obtain the necessary venting materials

locally. For example, the outer end of exhaust pipe

must have a weather hood with hinged dampers to

prevent back-draft when the dryer is not in use.

2. The exhaust duct must be four inches (10.2 cm) in

diameter with no obstructions. The exhaust duct

should be kept as short as possible. Make sure to

clean any old ducts before installing your new dryer.

3. Rigid or semi-rigid metal ducting is recommended for

use as transition ducting between the dryer and and the

wall. In special installations when it is impossible to

make a connection with the above recommendations,

then a UL-listed flexible metal transition duct may be

used between the dryer and wall connection only. The

use of this ducting will affect dry time.

4. DO NOT use sheet metal screws on exhaust pipe joints

or other fastening means which extend into the duct that

could catch lint and reduce the efficiency of the exhaust

system. Secure all joints with duct tape.

5. To maximize operating results, please observe the duct

length limitations noted in the chart above.

Number of 90°

Elbows

Weather Hood

Type

Recommended

Maximum length of 4”

(10.2 cm) diameter rigid

metal duct

Maximum length of 4”

(10.2 cm) diameter

flexible metal duct

NOTE : Deduct 6 feet (1.8 m) for each additional elbow.

It is not recommended to use more than 4 90° elbows.

Use Only for Short Run

Installations

65 feet (19.8 m)

55 feet (16.8 m)

47 feet (14.3 m)

36 feet (11.0 m)

28 feet (8.5 m)

45 feet (13.7 m)

35 feet (10.7 m)

30 feet (9.1 m)

25 feet (7.6 m)

20 feet (6.1 m)

55 feet (16.8 m)

47 feet (14.3 m)

41 feet (12.5 m)

30 feet (9.1 m)

22 feet (6.7 m)

35 feet (10.7 m)

27 feet (8.2 m)

21 feet (6.4 m)

17 feet (5.2 m)

15 feet (4.5m)

4”

(10.2 cm)

4”

(10.2 cm)

2-1/2”

(6.35 cm)

Table of contents

Languages:

Other Kenmore Dryer manuals

Kenmore

Kenmore 11061092000 Owner's manual

Kenmore

Kenmore 7972 - 700 7.5 cu. Ft. Capacity Gas Dryer User manual

Kenmore

Kenmore KING SIZE 60972 User manual

Kenmore

Kenmore 796.8219 User manual

Kenmore

Kenmore 7982 - 800 7.5 cu. Ft. Capacity Gas Dryer User manual

Kenmore

Kenmore 240-volt compact electric dryers Original instructions

Kenmore

Kenmore 9791 - 27 in. Laundry Center User manual

Kenmore

Kenmore W10034970B User manual

Kenmore

Kenmore 110.C8787? User manual

Kenmore

Kenmore 796.8002.900 User manual

Kenmore

Kenmore W10034880B User manual

Kenmore

Kenmore Elite HE5 Owner's manual

Kenmore

Kenmore 134199600H User manual

Kenmore

Kenmore 41798076700 User manual

Kenmore

Kenmore 64612 User manual

Kenmore

Kenmore 11063042101 Owner's manual

Kenmore

Kenmore Sensor smart electric dryer King size capacity... User manual

Kenmore

Kenmore 2696291100 Owner's manual

Kenmore

Kenmore Oasis 110.6708 User manual

Kenmore

Kenmore 29 IN. (73.7CM) User manual

Kenmore

Kenmore 41798076701 User manual

Kenmore

Kenmore 110.9756 Series User manual

Kenmore

Kenmore 8027 - 7.3 cu. Ft. Electric Dryer User manual

Kenmore

Kenmore 96280100 User manual

Popular Dryer manuals by other brands

Bosch

Bosch WTA79200GB Installation and operating instructions

Amana

Amana W10233410A Use and care guide

Miele

Miele TWH 780 WP operating instructions

Asko

Asko T760 user guide

Alliance Laundry Systems

Alliance Laundry Systems 25 Series Original instructions

Bosch

Bosch Logixx 10 WTB76556GB Instruction manual and installation instructions

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Operation and installation

Electrolux

Electrolux EW2H328R2 user manual

Beko

Beko DS8433RX1M user manual

Dawlance

Dawlance Spinner DS 6000 C owner's manual

Electrolux

Electrolux TP5080TW user manual

AEG

AEG TR838P4OB user manual

Indesit

Indesit IDV 75 instruction manual

Infiniton

Infiniton SD-DG85C manual

BOMANN

BOMANN WT 5019 instruction manual

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Installation

Asko

Asko T793C operating instructions

Frigidaire

Frigidaire CAQE7077KW0 use & care