JVC V.Networks VN-C2U User manual

VN-C2U
V.NETWORKS
INSTRUCTIONS
SS961423-002
Thank you for purchasing the JVC VN-C1U.
To gain maximum benefit from this product, read this
instruction manual carefully before use and retain it for future
reference.
The serial number is very important for maintaining quality of
your product. At the time of purchase, check to see that the
serial number is correctly printed on the top of the unit and
that the serial numbers on the unit and warranty match.
This instruction manual is printed on
recycled paper.
For Customer Use:
Enter below the Model No. and Serial
No. which are located on the rear of the
cabinet. Retain this information for future
reference.
Model No.
Serial No.

1. Read all of these instructions.
2. Save these instructions for later use.
3. All warnings on the product and in the operating instructions should
be adhered to.
4. Unplug this appliance system from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
5. Do not use attachments not recommended by the appliance manu-
facturer as they may cause hazards.
6. Do not use this appliance near water – for example, near a bath-
tub, washbowl, kitchen sink, or laundry tub, in a wet basement, or
near a swimming pool, etc.
7. Do not place this appliance on an unstable
cart, stand, or table. The appliance may fall,
causing serious injury to a child or adult, and
serious damage to the appliance.
Use only with a cart or stand recommended
by the manufacturer, or sold with the appli-
ance. Wall or shelf mounting should follow
the manufacturer's instructions, and should
use a mounting kit approved by the manu-
facturer.
An appliance and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the
appliance and cart combination to overturn.
8. Slots and openings in the cabinet and the back or bottom are pro-
vided for ventilation, and to insure reliable operation of the appli-
ance and to protect it from overheating, these openings must not
be blocked or covered. The openings should never be blocked by
placing the appliance on a bed, sofa, rug, or other similar surface.
This appliance should never be placed near or over a radiator or
heat register. This appliance should not be placed in a built-in in-
stallation such as a bookcase unless proper ventilation is provided.
9. This appliance should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power supplied to your home, consult your dealer or local
power company. For appliance designed to operate from battery
power, refer to the operating instructions.
10. This appliance system is equipped with a 3-wire grounding type
plug (a plug having a third (grounding) pin). This plug will only fit
into a grounding-type power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet, contact your electri-
cian to replace your obsolete outlet. Do not defeat the safety pur-
pose of the grounding plug.
IMPORTANT SAFEGUARDS
PORTABLE CART WARNING
(symbol provided by RETAC)
S3126A

Printed in Japan
11. For added protection for this product during a lightning storm, or
when it is left unattended and unused for long periods of time,
unplug it form the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning
and power-line surges.
12. Do not allow anything to rest on the power cord. Do not locate this
appliance where the cord will be abused by persons walking on it.
13. Follow all warnings and instructions marked on the appliance.
14. Do not overload wall outlets and extension cords as this can result
in fire or electric shock.
15. Never push objects of any kind into this appliance through cabinet
slots as they may touch dangerous voltage points or short out parts
that could result in a fire or electric shock. Never spill liquid of any
kind on the appliance.
16. Do not attempt to service this appliance yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
17. Unplug this appliance from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the appliance.
c. If the appliance has been exposed to rain or water.
d. If the appliance does not operate normally by following the op-
erating instructions. Adjust only those controls that are covered
by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive
work by a qualified technician to restore the appliance to nor-
mal operation.
e. If the appliance has been dropped or the cabinet has been dam-
aged.
f. When the appliance exhibits a distinct change in performance –
this indicates a need for service.
18. When replacement parts are required, be sure the service techni-
cian has used replacement parts specified by the manufacturer that
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
19. Upon completion of any service or repairs to this appliance, ask
the service technician to perform routine safety checks to deter-
mine that the appliance is in safe operating condition.
VICTOR COMPANY OF JAPAN, LIMITED

1. Read all of these instructions.
2. Save these instructions for later use.
3. All warnings on the product and in the operating instructions should
be adhered to.
4. Unplug this appliance system from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
5. Do not use attachments not recommended by the appliance manu-
facturer as they may cause hazards.
6. Do not use this appliance near water – for example, near a bath-
tub, washbowl, kitchen sink, or laundry tub, in a wet basement, or
near a swimming pool, etc.
7. Do not place this appliance on an unstable
cart, stand, or table. The appliance may fall,
causing serious injury to a child or adult, and
serious damage to the appliance.
Use only with a cart or stand recommended
by the manufacturer, or sold with the appli-
ance. Wall or shelf mounting should follow
the manufacturer's instructions, and should
use a mounting kit approved by the manu-
facturer.
An appliance and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the
appliance and cart combination to overturn.
8. Slots and openings in the cabinet and the back or bottom are pro-
vided for ventilation, and to insure reliable operation of the appli-
ance and to protect it from overheating, these openings must not
be blocked or covered. The openings should never be blocked by
placing the appliance on a bed, sofa, rug, or other similar surface.
This appliance should never be placed near or over a radiator or
heat register. This appliance should not be placed in a built-in in-
stallation such as a bookcase unless proper ventilation is provided.
9. This appliance should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power supplied to your home, consult your dealer or local
power company. For appliance designed to operate from battery
power, refer to the operating instructions.
10. This appliance system is equipped with a 3-wire grounding type
plug (a plug having a third (grounding) pin). This plug will only fit
into a grounding-type power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet, contact your electri-
cian to replace your obsolete outlet. Do not defeat the safety pur-
pose of the grounding plug.
IMPORTANT SAFEGUARDS
PORTABLE CART WARNING
(symbol provided by RETAC)
S3126A

Printed in Japan
11. For added protection for this product during a lightning storm, or
when it is left unattended and unused for long periods of time,
unplug it form the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning
and power-line surges.
12. Do not allow anything to rest on the power cord. Do not locate this
appliance where the cord will be abused by persons walking on it.
13. Follow all warnings and instructions marked on the appliance.
14. Do not overload wall outlets and extension cords as this can result
in fire or electric shock.
15. Never push objects of any kind into this appliance through cabinet
slots as they may touch dangerous voltage points or short out parts
that could result in a fire or electric shock. Never spill liquid of any
kind on the appliance.
16. Do not attempt to service this appliance yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
17. Unplug this appliance from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the appliance.
c. If the appliance has been exposed to rain or water.
d. If the appliance does not operate normally by following the op-
erating instructions. Adjust only those controls that are covered
by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive
work by a qualified technician to restore the appliance to nor-
mal operation.
e. If the appliance has been dropped or the cabinet has been dam-
aged.
f. When the appliance exhibits a distinct change in performance –
this indicates a need for service.
18. When replacement parts are required, be sure the service techni-
cian has used replacement parts specified by the manufacturer that
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
19. Upon completion of any service or repairs to this appliance, ask
the service technician to perform routine safety checks to deter-
mine that the appliance is in safe operating condition.
VICTOR COMPANY OF JAPAN, LIMITED

1
Package Contents
Operational Environment
This product is packaged with the following items. Contact your dealer of purchase for any missing
items.
VN-C2U main unit
VN-C2U controller CD-ROM
Ferrite core
Instruction manual (this document)
The following environment is necessary for the operation of VN-C2U.
PC operating with Microsoft Windows 95,98 or NT
CPU : Pentium 133MHz or equivalent or higher
(200MHz or higher recommended)
Memory : 32MB or more (64MB or more recommended)
Hard disk space : 20MB or more
Display and video card : 640 X 480 pixels or higher; high color
(1024 X 768 pixels or higher; true color recommended)
10BASE-T : LAN board, connector cables
LAN environment
10BASE-T network cross-connected with HUB, etc. of IEEE802.3 standard.
It is also possible to connect your PC with VN-C2U directly (1:1) using a crossing cable
(please check since some LAN boards do not allow use of cross cables).

2
Precautionary Notes
Avoid installing in the following locations:
• Where the unit is exposed to rain or water
• Where the ambient temperature exceeds the range of 0∞C ~ +40∞C (recommended)
• Where there is vibration
• Dusty areas or areas with oil or gas
The sensitivity will automatically increase when using this unit in a dark location with the
AGC on (Full Auto on). At this time the ??screen may appear rough??; however this is not a
malfunction.
When using Full Auto on for the white balance of this unit, the tint may appear slightly
different from that of the actual color due to the principle of the automatic white balance
tracking circuit; however, this is not a malfunction.
When shooting a highly bright object such as lamps, etc. white tails may appear above and
below the object on the screen. This is an elemental characteristic seen when shooting solid
objects referred to as the smearing effect, and is not a malfunction.
About Upgrades
Upgrades of the software (VN-C2U) can obtained via the Internet.The upgrade software can be
downloaded from the following homepage:
http://www.jvc-victor.co.jp

3
Installation and Setup
Before starting installation and setup
Since a setup of one IP address is necessary for each VN-C2U, follow the procedure given below to
setup each unit (the installation can be made at the same time if the power is left off.
1. Install VN-C2U
When installing in a location where it is difficult to turn the power on and off, install after
completing steps 2 through 5.
2. Connect VN-C2U to a network
(turn the power of VN-C2U on)
3. Set the IP address of VN-C2U
Always contact the network management for the IP address of VN-C2U and use only that which
is assigned or authorized.For setup of a second unit and following, reboot the PC and return to
step 2.
4. Enable the set IP address of VN-C2U
(Turn the power of VN-C2U off once, then turn the power back on)
5. Register the connecting point
Register the IP address information of VN-C2U to the user PC.
Names of VN-C2U parts
10BASE-T port
DC input jack
Lens cover
Lens block
Front Rear Top

4
Installation and Setup
1. Installation
Install using the separately sold mounting kit (model no. VN-BK20).
Do not turn the power on or connect to a network until installation is completed.
(3) Mount VN-C2U on the bracket
(1) Mount the bracket onto the ceiling, etc. (2) Mount the cover on the bracket
Note
To prevent the unit from falling, mount only on areas with sufficient strength.
VN-C2U can be installed as shown in the diagram below, or inverted. Do not
install the unit sideways.

5
2. Connecting to a network
Turn on the power of only one VN-C2U.
Connecting VN-C2U to a network and turning on the power will connect the unit to a network with the
following IP address.
Note
Factory set IP address : 192.168. 1. 2
All VN-C2U at the time of shipment have the same IP address. Correct
access cannot be obtained when turning the power of multiple units on at the
same time due to overlap of ID addresses. Always turn on the power of one
unit at a time and proceed with the following VN-C2U IP address setup.
In the case where doubling of IP addresses occur, correct access may not be
achieved unless waiting for at least 10 minutes after making correction, or
turning off all network devices then turning them back on.
To power outlet
When connecting to a HUB, use a straight cable.
When connecting directly to a PC, use a crossing cable.
Special adapter
Shielded
modular cable
To retain electromagnetic compatibillity,use the provided
ferrite core when connecting to VN-C2U.
Install the ferrite core within 50mm
of VN-C2U-side connector.
Ferrite core
Wound 3x
Table of contents
Other JVC Security Camera manuals

JVC
JVC TK-C700U - Color Cctv Camera User manual

JVC
JVC TK-C675B User manual

JVC
JVC TK-T2100RU User manual

JVC
JVC VN-V225VPU User manual

JVC
JVC TK-C205VP User manual

JVC
JVC V.NETWORKS VN-C1U User manual

JVC
JVC TK-C215V4U - CCTV Camera User manual

JVC
JVC TK-WD310E User manual

JVC
JVC TK-C205VPU(A) User manual

JVC
JVC TK-C1360BU - Ccd Color Camera User manual

JVC
JVC VN-V25U VN-V26U User manual

JVC
JVC TK-C2201WPE(EX) User manual

JVC
JVC LST0979-001B User manual

JVC
JVC VN-V26U - Network Camera User manual

JVC
JVC VN-H657BU User manual

JVC
JVC VN-V686U User manual

JVC
JVC VN-H217U User manual

JVC
JVC VN-C655U - Network Camera Manual

JVC
JVC TK-C2201E User manual

JVC
JVC TK-C920BU User manual




















