Jung 5201 HYG Series User manual

Temperature Management Hygrostat

Ref.-no.: ..5201 HYG..

Operating Instructions

Hygrostat

Table of contents

1. Safety instructions............................................................................ 2

2. Device layout ..................................................................................... 2

3. Function ............................................................................................. 2

3.1. Designated use............................................................................. 2

3.2. Product features............................................................................ 3

3.3. Automatic mode............................................................................ 3

3.4. Manual mode ................................................................................ 3

3.5. Party mode.................................................................................... 3

3.6. Standby mode............................................................................... 3

4. Operation............................................................................................ 4

4.1. Setting the humiditiy manually ...................................................... 4

4.2. Dehumidifying the ambient air manually....................................... 4

4.3. Activating the party mode ............................................................. 4

4.4. Activating the standby mode......................................................... 4

4.5. Switching back to automatic mode ............................................... 5

4.6. Cleaning the hygrostat.................................................................. 5

5. Fitting and electrical connection..................................................... 5

5.1. Fitting and connecting the device ................................................. 5

6. Annex.................................................................................................. 7

6.1. Technical data............................................................................... 7

6.2. Help in case of trouble .................................................................. 7

6.3. Guarantee ..................................................................................... 7

Stand: Sep-09 325 658 03

Temperature Management Hygrostat

Ref.-no.: ..5201 HYG..

1. Safety instructions

Electrical equipment must be installed and fitted by qualified

electricians only.

Before working on the device, disconnect the supply voltage (by

cutting out the circuit breaker) to avoid the risk of an electric shock.

Failure to observe the instructions may cause damage to the device

and result in fire or other hazards.

In rooms with open fires such as fireplaces or gas cookers, room

ventilation systems may only be operated if additional protective

measures are taken. The applicable Building Regulations for hearth

and fireplace installations must be observed.

These operating instructions are part of the product and must be

left with the final customer.

2. Device layout

Fig 1: Front view

(1) Mode-of-operation selector

(2) Control knob

(3) Status LED

3. Function

3.1. Designated use

The hygrostat controls the humidity of the air in order to create agreeable

and healthy conditions in the room and helps to prevent the formation of

detrimental mould.

•Measurement of air humidity in rooms

•Control of 230 V heating and ventilation appliances

•Installation in a flush-mounting box in acc. with DIN 49073

Temperature Management Hygrostat

Ref.-no.: ..5201 HYG..

3.2. Product features

•Measurement of room temperature and air humidity to determine

the optimal content of moisture in the air

•Control of heating and ventilation appliances for the removal of

moisture in rooms

•Manual control range approx. 20…95 % or fixed value of 60 %

relative humidity

•Control knob for manual adjustment of the setpoint

•Modes of operation: automatic, manual, party, standby

•Status LED

•Time-controlled continuous operation

3.3. Automatic mode

When the air humidity exceeds the preset value, the hygrostat activates

the connected dehumidification appliance:

•LED yellow: off, LED green: on, LED red: off

When the air humidity is lower than the preset value, the hygrostat

deactivates the connected appliance:

•LED yellow: off, LED green: off, LED red: off

After one hour of continuous operation, the hygrostat switches off the

appliance for 4 hours:

•LED yellow: off, LED green: off, LED red: on

LIf the content of water in the ambient air is very high, a

dehumidification by means of a fan is not possible.

3.4. Manual mode

Fan operation is activated manually for abt. one hour.

•LED yellow: on, LED green: on, LED red: off

3.5. Party mode

Fan operation is activated manually for abt. six hours.

•LED yellow: on, LED green: on, LED red: flashing

3.6. Standby mode

Fan operation is deactivated manually for abt. four hours.

•LED yellow: on, LED green: off, LED red: on

Temperature Management Hygrostat

Ref.-no.: ..5201 HYG..

4. Operation

4.1. Setting the humiditiy manually

The center position of the control knob corresponds to approx. 55 %

relative humidity, which is generally considered just right for comfort.

The device must be in the automatic mode of operation.

The device has been enabled for free selection of the humidity with the

control knob (Fig. 3)

•To increase the air humidity: turn the control knob to the right.

•To reduce the air humidity: turn the control knob to the left.

LWhen making changes, proceed only in small steps until the setting

for individual comfort has been found. As the air conditions in the

room change only slowly, the time between changes should be at

least 1.5 hours.

LThe relative humidity for comfortable room air conditions lies between

40 and 60 %.

4.2. Dehumidifying the ambient air manually

The device must be in the automatic mode of operation.

•Depress the mode-of-operation selector briefly.

The relay is switched on for abt. one hour independent of the

degree of humidity in the room.

LED yellow: on, LED green: on, LED red: off

After an hour, the hygrostat switches back to the automatic mode of

operation.

4.3. Activating the party mode

The device must be in the automatic or in the manual mode of operation.

•Depress the mode-of-operation selector twice briefly.

The relay is switched on for abt. six hours independent of the

degree of humidity in the room.

LED yellow: on, LED green: on, LED red: flashing

At the end of six hours, the hygrostat switches back to the

automatic mode of operation.

4.4. Activating the standby mode

The device must be in the automatic mode of operation.

•Press the mode-of-operation selector longer.

After 3 s, the hygrostat switches the relay off for abt. 4 hours

independent of the degree of humidity in the room.

LED yellow: on, LED green: off, LED red: on

At the end of four hours, the hygrostat switches back to the

automatic mode of operation.

Temperature Management Hygrostat

Ref.-no.: ..5201 HYG..

4.5. Switching back to automatic mode

•Press the mode-of-operation selector longer.

After abt. 5 s, the hygrostat switches back to the automatic mode of

operation.

LED yellow: off, LED green: off, LED red: off

LWhen the relay is switched on in the automatic mode, the green LED

is on.

4.6. Cleaning the hygrostat

Clean the hygrostat housing with a wet cloth.

LDo not use detergents.

LAfter cleaning, the hygrostat may temporarily measure higher

humidity values.

Information for qualified electricians

DANGER!

Electric shock in case of accidental contact with live parts. Electric

shocks can be fatal.

Before working on the device, cut out the mains supply and cover

up live parts in the surroundings.

5. Fitting and electrical connection

5.1. Fitting and connecting the device

The device consists of the insert and the attachment module (Fig. 4).

Fig. 2: Electrical connection

Do not install the hygrostat together with other electrical devices in the

same combination since the heat produced by these devices may have

an influence on the temperature measurement of the hygrostat.

Temperature Management Hygrostat

Ref.-no.: ..5201 HYG..

Install the hygrostat in a place shielded from direct sunlight, draughts and

heat radiation from nearby electrical appliances as, for instance, cooking

ranges or refrigerators.

Do not install the hygrostat above or in the vicinity of heating appliances.

If possible, install the hygrostat only on a base behaving neutrally in the

presence of moisture. Hygroscopic material like plasterboard can

influence the control characteristics.

For installation installation in bathrooms, laundry rooms, etc.: observe the

safety distances in acc. with IEC 60364-7-701.

Fitting height: approx. 1.5 m

Installation in a flush-mounting box in acc. with DIN 49073.

•Connect the insert (Fig. 2).

•To set a fixed humidity value: turn the setscrew on the rear of the

attachment module to 60 % (Fig. 3).

•To activate the control knob function: turn the setscrew on the rear

of the attachment module fully to the left to 20-95 % (Fig. 3).

Fig. 3: Setscrew for setpoint selection

•Place the decorative frame on the insert.

•Plug the attachment onto the insert observing the correct position

(Fig. 4).

Fig. 4: Fitting of the attachment

Temperature Management Hygrostat

Ref.-no.: ..5201 HYG..

6. Annex

6.1. Technical data

Rated voltage AC 230 V ~

Mains frequency 50 / 60 Hz

Ambient temperature 0 … 45 °C

Storage temperature -20 … 70 °C

Relay contact potential-free n.o. contact

Contact type μ

Switching voltage AC max. 230 V

Switched current AC1 (cos ϕ> 0,8) 15 mA … 8 A

Switched current AC3 (cos ϕ< 0,8) 15 mA … 4 A

Motors 15 mA … 4 A

Switching voltage DC max. 24 V

Switched current DC 15 mA … 8 A

Control range 20 … 95 % relative humidity (rh)

Measurement tolerance ± 5 % rh

Switching difference ± 2 %

Length of load line (> 1.5 mm²) max. 100 m

6.2. Help in case of trouble

No function, all LED‘s blinking

Device installed on wrong insert, e.g. blind/shutter insert.

Install the device on a suitable insert.

6.3. Guarantee

Our products are under guarantee within the scope of the statutory

provisions.

Please return the unit postage paid to our central service

department giving a brief description of the fault:

ALBRECHT JUNG GMBH & CO. KG

Service-Center

Kupferstr. 17-19

D-44532 Lünen

Service-Line: +(49) 23 55 . 80 65 51

Telefax: +(49) 23 55 . 80 61 65

E-Mail: [email protected]

General equipment

Service-Line: +(49) 23 55 . 80 65 55

Telefax: +(49) 23 55 . 80 62 55

E-Mail: [email protected]

KNX equipment

Service-Line: +(49) 23 55 . 80 65 56

Telefax: +(49) 23 55 . 80 62 55

E-Mail: [email protected]

The -Sign is a free trade sign addressed exclusively to the

authorities and does not include any warranty of any properties.

Table of contents

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual