IWILL piils User manual
1
EC Declaration of Conformity
We
Iwill Corp.
No. 10, Wu Chuan 3rd Rd.,
Hsin Chuang City, Taipei,
Taiwan, R.O.C.
Declare under sole responsibility that the
PIILS motherboard
Meets the intent of Directive 89/336/ECC for Electromagnetic Compatibility. Compliance
was demonstrated to the following specifications as listed in the official Journal of the
European Communities:
EN 50081-1 Emissions:
EN 55022 Radiated, Class B
EN 55022 Conducted, Class B
EN 60555-2 Power Harmonics
EN 50082-1 Immunity:
IEC 801-2 Electrostatic Discharge
IEC 801-3 RF Radiate
IEC 801-4 Fast Transient
2
About This Manual
This manual will introduce to the user how this product is consisted. All useful information will
be described in later chapters. Keep this manual for your future upgrade or system re-
configuration.
Chapter 0 Overview
The features and specifications of this motherboard
Chapter 1 Quick Installation
The quick reference for experienced users
Chapter 2 Hardware Installation
The detailed information on jumper setting, connection, and hardware installation
Chapter 3 System BIOS Setup
The detail information of the system BIOS setup options
Chapter 4 SCSI BIOS Setup
The detail information of the SCSI BIOS setup options
Copyright
This manual contains information protected by copyright law. All rights are reserved. No any part
of this document may be used or reproduced in any forms or by any means, or stored in a database
or retrieval system without prior written permission from Iwill Corp.
This manual is subject to change without notice.
Trademark
Intel / Pentium are trademarks of Intel Corporation.
IWILL and IWILL logo are trademarks of IWILL Corp.
Sound Blaster is a registered trademark of Creative Technology Ltd.
Sound Blaster-LINK and SB-LINK are trademarks of Creative Technology Ltd.
And all other product names are trademarks and registered trademarks of their respective owners.
Warning
Most of the features of this product have passed strict verification and are subject to change at any
time without notice. If any malfunction occurs due to the future technical changes made by the
respective component manufacturers, Iwill assumes no responsibility or liability for it.
3
Content
CHAPTER 0.........................................................................................................................5
OVERVIEW.........................................................................................................................5
0.1 FEATURES ........................................................................................................6
0.2 ENVIRONMENT REQUIREMENTS ........................................................................8
0.3 MOTHERBOARD COMPONENTS PLACEMENT ......................................................9
0.4 BACK PANEL CONNECTORS.............................................................................11
0.5 FORM FACTOR................................................................................................12
CHAPTER 1.......................................................................................................................13
QUICK INSTALLATION.................................................................................................13
CHAPTER 2.......................................................................................................................16
HARDWARE INSTALLATION........................................................................................16
2.1 PREPARATION AND INSPECTION.......................................................................16
2.2 UNPACK THE PIILS.........................................................................................16
2.3 INSTALLATION PROCEDURES............................................................................17
CHAPTER 3.......................................................................................................................26
SYSTEM BIOS SETUP .....................................................................................................26
3.1 INTRODUCTION...............................................................................................26
3.2 MAIN MENU...................................................................................................28
3.3 STANDARD CMOS SETUP.........................................................................28
3.4 BIOS FEATURES SETUP.............................................................................32
3.5 CHIPSET FEATURES SETUP......................................................................36
3.6 POWER MANEGEMENT SETUP................................................................40
3.7 PNP/ PCI CONFIGURATION .......................................................................43
3.8 INTEGRATED PERIPHERALS....................................................................45
3.9 LOAD SETUP DEFAULTS...........................................................................48
3.10 SUPERVISOR / USER PASSWORD SETTING ..........................................48
3.11 IDE HDD AUTODETECTION....................................................................48
3.12 SAVE & EXIT SETUP ................................................................................49
3.13 EXIT WITHOUT SAVING..........................................................................49
4
CHAPTER 4.......................................................................................................................50
SCSI BIOS SETUP ............................................................................................................50
4.1 INTRODUCTION...............................................................................................50
4.2 CONFIGURE/VIEW HOST ADAPTER SETTINGS ..................................................50
4.3 SCSI DISK UTILITIES......................................................................................55
5
Chapter 0
Overview
Thank you for purchasing Iwill PIILS motherboard This operation manual will instruct you how
to configure and install the system properly. It contains an overview about the engineering design
and features of this product. Also, this manual provides useful information for later on upgrade or
configuration change. Keep this for your future need.
YEAR 2000 issue
The IBM compatible PC utilizes a Motorola MC146818 compatible Real-Time Clock (RTC) chip
to maintain the date and time. Unfortunately, the “century”is not manipulated by the RTC. It uses
8-bit of information to report the year and can only hold the last two digits of a year in packed
BCD format. So 1997 is reported solely as 97. Since the RTC also contains non-volatile memory,
IBM specified a location in the memory to hold “century”information. By combining the century
data with the year data, software can obtain a full 4-digit year. When the Year 2000 occurs, the
RTC reports the year as ’00’and the “century”in RTC memory will contain ’19.’Combining the
full 4-digit year yields 1900, not 2000. Any applications which compares dates, or uses relative
dates to perform functions will see an incorrect dates.
Motherboards contain BIOS, which is one of the key ingredients to check for systems designed to
handle the year 2000. All motherboards currently shipped from Iwill contain BIOS capable
of handling the year 2000 date correctly. The BIOS contains a feature that checks the least two
significant digits of the year stored in the RTC during each BIOS request (INT 1Ah) to read the
date and, if less than `80', updates the century byte to `20'. This feature enables operating systems
and applications using the BIOS date/time services to reliably manipulate the year as a four-digit
value.
Be aware that the BIOS capability alone does not ensure that the system will handle the transition
correctly. Other system components such as the operating system and application software also
need to be able to handle the year 2000 date and recognize the date format from other pieces.
6
0.1 Features
0.1.1 Processor
Single Pentium®
II processor support
Supports 66 MHz bus speed
Supports all published Pentium®
II processor voltages
S.E.C. (Single Edge Contact) cartridge Slot 1 connector
Easy-jumper to set the processor speed from 233 MHz to 333 MHz
0.1.2 Core Logic
Intel 82443LX PCI/A.G.P. controller (PAC)
Integrated DRAM controller
Integrated PCI bus mastering controller
Integrated Accelerated Graphics Port (A.G.P.) bus controller
Intel 82371AB PCI/ISA/IDE Xcelerator (PIIX4)
Multifunction PCI-to-ISA bridge (PCI Rev 2.1 compliant)
Integrated IDE controller with Ultra DMA/33 support
USB host interface with support for two USB ports
Enhanced DMA controller and standard Interrupt controller and Timer function
Support system Management Bus (SMB)
0.1.3 Main Memory
Four 168-pin DIMM (Dual In Line Memory Module) sockets
Supports up to 512 MB of 3.3 V Unbuffered Synchronous DRAM (SDRAM)
Supports up to 1 GB of 3.3 V Extended Data Out (EDO) memory
64-bit data interface with ECC support
0.1.4 SCSI Subsystem
Adaptec AIC-7880 PCI Bus Master SCSI Host Adapter
Providing up to 40 MB/sec sustained throughput per channel
Supports burst data transfer on the PCI bus up to 133 MB/sec
Providing one Ultra Wide 68-pin connectors and one 50-pin connector
Adaptec RAIDport interface supported
7
0.1.5 Multi I/O
ALI M5135 super I/O controller
Supports two floppy disk drives (include 3 Mode drive) and/or QIC-80 tape drive
Supports one multi-mode parallel port
Supports two high speed 16550 FIFO serial ports
Integrated keyboard controller
Integrated PS/2 mouse controller
0.1.6 Expansion slots
Three ISA slot
Three PCI slot
One shared ISA/PCI slot
One A.G.P. slot
0.1.7 Form Factor
Compliance with ATX Version 2.01 specification
Supports ATX power supply connector
Supports the remote on/off switch
Physical dimensions: length: 245 mm / width: 305 mm
0.1.8 Manageability
Optional Hottek HT82H791 System Hardware Monitor
0.1.9 Other features
Award BIOS
Using Flash ROM to provide on-board-upgrade ability without changing components
Plug and Play compatible
Supports Advanced Power Management (APM)
Supports Creative SB-LINK to deliver Sound Blaster 16 compatibility
8
0.2 Environment Requirements
Temperature 0-55 degrees C (operating or storage)
5% to 95% non-condensing relative humidity
At least a 250 W power supply
The power supply must comply with the following recommendations found in the spec.:
The potential relation between 3.3 VDC and +5 VDC power rails
The current capability of the +5VSB line
All timing parameters
9
0.3 Motherboard Components Placement
The following figure shows the location of the motherboard components.
PCIx
FAN
AGP
SEC.
PRI.
J2
J1
J9
SLOT1
J3
J5
J4
JP1
J10
DIMM0~3
FLOPPY
GND
+12V
SENSE
1
3
PW ON
233
266
300
350
RS0
RS1
1
1
1
1
J6/7/8
1
1--2:Normal
2--3:Clear CMOS
3
JP19
IRMODE
1
NC
NC
VCC
IRRX
GND
IRTX
7
JP23
J35
SIRQ
6
2
1
5
GND
REQ#
GND
GNT#
SB LINK
RAIDBUS
1
10
11
20
RESET SCSI IDE
SPEAKER
Cathode-
Anode+
GND
Reset
VCC
Cathode-
Anode+
Cathode-
NC
Anode+
Buzz
GND
Keylock
GND
NC KEYLOCK
J46
JP20
SCSI_WIDESCSI
J45
3
1
LID
GND
5VSB
WOL
10
Location ScreenPrinting Description
J1 J1 Serial 1 connector
J2 J2 Serial 2 connector
J3 J3 Two USB connectors
J4 J4 PS/2 keyboard connector
J5 J5 PS/2 mouse connector
J6--J8 J6,J7,J8 ISA expansion slots
J9 J9 Parallel connector
J10 J10 Standard ATX power connector
J11--J14 PCI1--4 PCI expansion slots
J15 AGP A.G.P. connector
J16 Slot1 Processor Slot 1 socket
J17 FAN Processor fan header
J18 RAIDBUS Adaptec RAIDport connector
J19,J22--J24 DIMM0--3 168-pin DIMM Sockets
J25 PRI. Primary IDE connector
J26 SEC. Secondary IDE connector
J27 FLOPPY Floppy drive connector
J33 SCSI Narrow SCSI connector
J34 SCSI_WIDE Wide SCSI connector
J35 J35 Jumper for PCI devices compatibility
J36 J36 Front panel I/O header
IDE (pins 5--6): IDE LED header
SCSI (pins 7--8): SCSI LED header
RESET (pins 9--10): Reset Switch header
KEYLOCK (pins 11--15): Power LED and Keylock switch header
SPEAKER (pins 17--20): Speaker header
J44 SB LINK Creative SB-LINK header
J45 J45 System fan header
J46 J46 System fan header
J48 WOL Wake On LAN header
JP1 JP1 Jumper for processor frequency selection
JP10 PW ON Remote power on/off header
JP19 JP19 Jumper for clearing CMOS
JP20 JP20 Jumper for SCSI enable/disable
JP23 JP23 IR (infrared) connector
Table of contents
Other IWILL Motherboard manuals
IWILL
IWILL P4DA User manual
IWILL
IWILL DPL533 User manual
IWILL
IWILL KK266Plus User manual
IWILL
IWILL DP533 Series User manual
IWILL
IWILL KK266 User manual
IWILL
IWILL DGL200 User manual
IWILL
IWILL DP400 User manual
IWILL
IWILL XA100 Ultra ATA-2 User manual
IWILL
IWILL DK8X User manual
IWILL
IWILL VX133 User manual
IWILL
IWILL VX133u User manual
IWILL
IWILL K7S2 Series User manual
IWILL
IWILL mp4s Original operating instructions
IWILL
IWILL DP6NS User manual
IWILL
IWILL IWILL P4D-N User manual
IWILL
IWILL DX400-SN User manual
IWILL
IWILL K7S3 Series User manual
IWILL
IWILL P4G Series User manual
IWILL
IWILL P4SE Series User manual
IWILL
IWILL P55TV User manual
