IWILL DPIILS2 User manual
1
EC Declaration of Conformity
We
Iwill Corp.
No. 10, Wu Chuan 3rd Rd.,
Hsin Chuang City, Taipei,
Taiwan, R.O.C.
Declare under sole responsibility that the
DPIILS2 motherboard
Meets the intent of Directive 89/336/ECC for Electromagnetic Compatibility. Compliance
was demonstrated to the following specifications as listed in the official Journal of the
European Communities:
EN 50081-1 Emissions:
EN 55022 Radiated, Class B
EN 55022 Conducted, Class B
EN 60555-2 Power Harmonics
EN 50082-1 Immunity:
IEC 801-2 Electrostatic Discharge
IEC 801-3 RF Radiate
IEC 801-4 Fast Transient
2
About This Manual
This manual will introduce to the user how this product is consisted. All useful information will
be described in later chapters. Keep this manual for your future upgrade or system re-
configuration.
Chapter 0 Overview
The features and specifications of this motherboard
Chapter 1 Quick Installation
The quick reference for experienced users
Chapter 2 Hardware Installation
The detailed information on jumper setting, connection, and hardware installation
Chapter 3 System BIOS Setup
The detail information of the system BIOS setup options
Chapter 4 SCSI BIOS Setup
The detail information of the SCSI BIOS setup options
Copyright
This manual contains information protected by copyright law. All rights are reserved. No any part
of this document may be used or reproduced in any forms or by any means, or stored in a database
or retrieval system without prior written permission from Iwill Corp.
This manual is subject to change without notice.
Trademark
Intel / Pentium are trademarks of Intel Corporation.
IWILL and IWILL logo are trademarks of IWILL Corp.
Sound Blaster is a registered trademark of Creative Technology Ltd.
Sound Blaster-LINK and SB-LINK are trademarks of Creative Technology Ltd.
And all other product names are trademarks and registered trademarks of their respective owners.
Warning
Most of the features of this product have passed strict verification and are subject to change at any
time without notice. If any malfunction occurs due to the future technical changes made by the
respective component manufacturers, Iwill assumes no responsibility or liability for it.
3
Content
CHAPTER 0 ...........................................................................................................5
OVERVIEW ...........................................................................................................5
0.1 FEATURES ........................................................................................................6
0.2 ENVIRONMENT REQUIREMENTS ........................................................................7
0.3 MOTHERBOARD COMPONENTS PLACEMENT ......................................................9
0.4 BACK PANEL CONNECTORS.............................................................................11
0.5 FORM FACTOR................................................................................................12
CHAPTER 1 .........................................................................................................13
QUICK INSTALLATION ....................................................................................13
CHAPTER 2 .........................................................................................................16
HARDWARE INSTALLATION...........................................................................16
2.1 PREPARATION AND INSPECTION.......................................................................16
2.2 UNPACK THE DPIILS2....................................................................................16
2.3 INSTALLATION PROCEDURES............................................................................17
CHAPTER 3 .........................................................................................................26
SYSTEM BIOS SETUP........................................................................................26
3.1 INTRODUCTION...............................................................................................26
3.2 MAIN MENU...................................................................................................28
3.3 STANDARD CMOS SETUP.........................................................................28
3.4 BIOS FEATURES SETUP.............................................................................32
3.5 CHIPSET FEATURES SETUP......................................................................36
3.6 POWER MANEGEMENT SETUP................................................................40
3.7 PNP/ PCI CONFIGURATION .......................................................................43
3.8 INTEGRATED PERIPHERALS....................................................................45
3.9 LOAD SETUP DEFAULTS...........................................................................48
3.10 SUPERVISOR / USER PASSWORD SETTING ..........................................48
3.11 IDE HDD AUTODETECTION....................................................................48
3.12 SAVE & EXIT SETUP ................................................................................48
3.13 EXIT WITHOUT SAVING..........................................................................48
4
CHAPTER 4 .........................................................................................................49
SCSI BIOS SETUP...............................................................................................49
4.1 INTRODUCTION...............................................................................................49
4.2 CONFIGURE/VIEW HOST ADAPTER SETTINGS ..................................................49
4.3 SCSI DISK UTILITIES......................................................................................54
5
Chapter 0
Overview
Thank you for purchasing Iwill DPIILS2 motherboard This operation manual will instruct you
how to configure and install the system properly. It contains an overview about the engineering
design and features of this product. Also, this manual provides useful information for later on
upgrade or configuration change. Keep this for your future need.
YEAR 2000 issue
The IBM compatible PC utilizes a Motorola MC146818 compatible Real Time Clock (RTC) chip
to maintain the date and time. Unfortunately, the “century”is not manipulated by the RTC. It uses
8-bit of information to report the year and can only hold the last two digits of a year in packed
BCD format. So 1997 is reported solely as 97. Since the RTC also contains non-volatile memory,
IBM specified a location in the memory to hold “century”information. By combining the century
data with the year data, software can obtain a full 4-digit year. When the Year 2000 occurs, the
RTC reports the year as ’00’and the “century”in RTC memory will contain ’19.’Combining the
full 4-digit year yields 1900, not 2000. Any applications which compares dates, or uses relative
dates to perform functions will see an incorrect dates.
Motherboards contain BIOS, which is one of the key ingredients to check for systems designed to
handle the year 2000. All motherboards currently shipped from Iwill contain BIOS capable
of handling the year 2000 date correctly. The BIOS contains a feature that checks the least two
significant digits of the year stored in the RTC during each BIOS request (INT 1Ah) to read the
date and, if less than `80', updates the century byte to `20'. This feature enables operating systems
and applications using the BIOS date/time services to reliably manipulate the year as a four-digit
value.
Be aware that the BIOS capability alone does not ensure that the system will handle the transition
correctly. Other system components such as the operating system and application software also
need to be able to handle the year 2000 date and recognize the date format from other pieces.
6
0.1 Features
0.1.1 Processor
Single or dual Pentium®
II processor support
Supports 66 MHz bus speed
Supports all published Pentium®
II processor voltages
S.E.C. (Single Edge Contact) cartridge Slot 1 connector
Easy-jumper to set the processor speed from 233 MHz to 333 MHz
0.1.2 Core Logic
Intel 82443LX PCI/A.G.P. controller (PAC)
Integrated DRAM controller
Integrated PCI bus mastering controller
Integrated Accelerated Graphics Port (A.G.P.) bus controller
Intel 82371AB PCI/ISA/IDE Xcelerator (PIIX4)
Multifunction PCI-to-ISA bridge (PCI Rev 2.1 compliant)
Integrated IDE controller with Ultra DMA/33 support
USB host interface with support for two USB ports
Enhanced DMA controller and standard Interrupt controller and Timer function
Support system Management Bus (SMB)
0.1.3 Main Memory
Four 168-pin DIMM (Dual In Line Memory Module) sockets
Supports up to 512 MB of 3.3 V Unbuffered Synchronous DRAM (SDRAM)
Supports up to 1 GB of 3.3 V Extended Data Out (EDO) memory
64-bit data interface with ECC support
0.1.4 SCSI Subsystem
Adaptec AIC-7895 PCI Bus Master SCSI Host Adapter
Dual SCSI channel supported
Providing up to 40 MB/sec sustained throughput per channel
Supports burst data transfer on the PCI bus up to 133 MB/sec
Providing two Ultra Wide 68-pin connectors and one 50-pin connector
Adaptec RAIDport II interface supported
7
0.1.5 Multi I/O
Winbond W83977TF super I/O controller
Supports two floppy disk drives (include 3 Mode drive) and / or QIC-80 tape drive
Supports one multi-mode parallel port
Supports two high speed 16550 FIFO serial ports
Integrated keyboard controller
Integrated PS/2 mouse controller
0.1.6 Expansion slots
Three ISA slot
Three PCI slot
One shared ISA/PCI slot
One A.G.P. slot
0.1.7 Form Factor
Compliance with ATX Version 2.01 specification
Supports ATX power supply connector
Supports the remote on/off switch
Physical dimensions: length: 265 mm / width: 305 mm
0.1.8 Manageability
NS LM78 System Hardware Monitor
0.1.9 Other features
Award BIOS
Using Flash ROM to provide on-board-upgrade ability without changing components
Plug and Play compatible
Supports Advanced Power Management (APM)
0.2 Environment Requirements
Temperature 0-55 degrees C (operating or storage)
5% to 95% non-condensing relative humidity
At least a 250 W power supply
The power supply must comply with the following recommendations found in the spec.:
8
The potential relation between 3.3 VDC and +5 VDC power rails
The current capability of the +5VSB line
All timing parameters
9
0.3 Motherboard Components Placement
The following figure shows the location of the motherboard components.
PCIx
AGP
J20
CH.#2
CH.#1
J5
J7
J6
P. SLOT1
J8
J10
J9
J1-3
RAIDport II
PWR ON
J4
S. SLOT1
DIMM0~3
FLOPPY
GND
+12V
SENSE
1
3
JP6
1--2: SCSI Enable
2--3: SCSI Disable
1
JP3
1
1--2:Normal
2--3:Clear CMOS
3
J17
1
1
1
1
1
10
11
20
RESET SCSI IDE
SPEAKER
Cathode-
Anode+
Reset
GND
VCC
Cathode-
Anode+
Cathode-
NC
Anode+
Buzz
GND
Keylock
GND
NC KEYLOCK
1
1
1
SEC.IDE
CH.#1
1
FIRRX
CIRRX
VCC
IRRX
GND
IRTX
NC
7
JP1
JP2
233
266
300
333
366
400
RS1
RS2
RS3
RS4
PRI.IDE
10
Location ScreenPrinting Description
J1--J3 J1--J3 ISA expansion slots
J4 J4 Standard ATX power connector
J5 J5 Serial 2 connector
J6 J6 Parallel connector
J7 J7 Serial 1 connector
J8 J8 Two USB connectors
J9 J9 PS/2 keyboard connector
J10 J10 PS/2 mouse connector
J11--J14 PCI1--4 PCI expansion slots
J15 AGP A.G.P. connector
J16 P.Slot1 Primary processor Slot 1
J17 J17 Pri. Processor fan header
J18 RAIDport II Adaptec RAIDport II connector
J19 S.Slot1 Secondary processor Slot 1
J20 J20 Sec. Processor fan header
J21--J24 DIMM0--3 168-pin DIMM Sockets
J27 PRIMARY IDE Primary IDE connector
J28 CH.#1 Wide SCSI connector of Channel A
J29 SECONDARY IDE Secondary IDE connector
J30 FLOPPY Floppy drive connector
J34 J34 Front panel I/O header
IDE LED (pins 5--6): IDE LED header
SCSI LED (pins 7--8): SCSI LED header
RESET (pins 9--10): Reset Switch header
KEYLOCK (pins 11--15): Power LED and Keylock switch header
SPEAKER (pins 17--20): Speaker header
J35 CH.#2 Wide SCSI connector of Channel B
J36 CH.#1 Narrow SCSI connector of Channel A
JP8 PWR ON Remote power on/off header
JP1 JP1 IR (infrared) connector
JP2 JP2 Jumper for processor frequency selection
JP3 JP3 Jumper for clearing CMOS
JP6 JP6 Jumper for SCSI enable/disable
Table of contents
Other IWILL Motherboard manuals
IWILL
IWILL P4E Series User manual
IWILL
IWILL P4SE Series User manual
IWILL
IWILL P4SP User manual
IWILL
IWILL DPL533 User manual
IWILL
IWILL DP6NS User manual
IWILL
IWILL PIINS User manual
IWILL
IWILL WO2 Original operating instructions
IWILL
IWILL DVD266u-RN User manual
IWILL
IWILL VX133u User manual
IWILL
IWILL K7S3 Series User manual
IWILL
IWILL P4G Series User manual
IWILL
IWILL wa133 User manual
IWILL
IWILL DP400 User manual
IWILL
IWILL LE370 User manual
IWILL
IWILL IWILL P4D-N User manual
IWILL
IWILL MPX2 User manual
IWILL
IWILL VD133 User manual
IWILL
IWILL Motherboard DJ800 User manual
IWILL
IWILL mp4s Original operating instructions
IWILL
IWILL XP333 User manual
