IWILL DN800 User manual
IWILL DN800/DNSV
Motherboard
User’s Manual
FB23634300
User’s Manual
DN800 Motherboard
ii
Preface
Disclaimer
The manufacturer makes no representations or warranties regarding the
contents of this manual and specifically disclaims any implied warranties
of merchantability or fitness for any particular purpose. Furthermore, the
manufacturer reserves the right to revise this publication or make changes
in the specifications of the product described within it at any time without
notice and without obligation to notify any person of such revision or
change.
Trademarks
Microsoft and Windows are registered trademarks of Microsoft Corp.
Intel and Xeon are registered trademarks of Intel Corporation. Other prod-
uct names used in this manual are the properties of their respective owners
and are acknowledged.
Copyright
This publication, including all photographs, illustrations and software,
is protected under international copyright laws, with all rights reserved.
Neither this manual, nor any of the material contained herein, may be re-
produced without the express written consent of the manufacturer. IWILL
©Copyright 2004
Important
The information in this document is subject to change without notice.
iii
User’s Manual
DN800 Motherboard
1: Overview .............................................................................1-1
Packing list ................................................................................. 1-1
Safety Notice.............................................................................. 1-2
DN800/DNSV Specification ..................................................... 1-5
2: Components and Jumper Setting ..........................2-1
Mainboard Map.......................................................................... 2-1
Components List........................................................................ 2-2
Jumper Setting ........................................................................... 2-3
Rear Panel I/O Ports .................................................................. 2-5
Additional I/O Connectors ........................................................ 2-9
EPS12V Power Connectors ..................................................... 2-14
Primary IDE Connectors ......................................................... 2-15
CPU/ System Fan Connectors ................................................. 2-16
3: Hardware Installation ..................................................3-1
Motherboard Installation ........................................................... 3-1
Installing the CPU and Heatsink Procedures ............................ 3-2
Heatsink Installation Notice ...................................................... 3-8
Memory Installation Procedure ................................................. 3-9
Installing Expansion Cards ........................................................ 3-12
Powering on your System.......................................................... 3-13
T
able
o
f
C
ontents
iv
Preface
4: BIOS Setup .........................................................................3-1
Starting the BIOS Setup ............................................................ 4-1
Using the BIOS Setup Utility .................................................... 4-3
Main Menu................................................................................. 4-5
Advanced Menu ......................................................................... 4-6
Boot Menu ................................................................................. 4-7
Boot Setting Configuration Submenu ....................................... 4-8
Exit Menu ................................................................................ 4-10
5: OS and rivers Installation .......................................5-1
OS Installation ........................................................................... 5-1
Drivers Installation .................................................................... 5-2
5:
v
Chapter 1
Overview
Chapter 1
Package
DN800/ DNSV Motherboard
Rear panel I/O shield
Three jumper caps (Extra caps in case original caps get lost)
One Power Installation CD (contains drivers and utilities)
User’s manual
One ATA-66/100 IDE cable
Two SATA cables + one SATA power cable
One Floppy disk drive cable
Two heatsink retention modules
Two Hat Springs for CPU cooler
One Iron backplate
Two CPU Plastic backplates
1-1
Overview
DN800 Motherboard
O v e r v i e w
YOU MUST HAVE ENOUGH SYSTEM INTEGRATION KNOWLEDGE
BEFORE THE INSTALLATION
General Safety Precautions
Keep the area around the Server clean and free of clutter.
Servers weigh a lot. When lifting the system, two people should
lift slowly from opposite ends with their feet spread out to distrib-
ute the weight. Always keep your back straight and lift with your
legs.
Place the chassis top cover and any system components that have
been removed away from the system or on a table so that they won’t
accidentally be stepped on.
While working on the system, do not wear loose items such as neck-
ties and unbuttoned shirtsleeves. They can come into contact with
electrical circuits or get pulled into a cooling fan.
Remove any jewelry or metal objects from your body, which are
excellent metal conductors and can create short circuits and harm
you if they come into contact with printed circuit boards or areas
where power is present.
ESD Precautions
Electrostatic discharge (ESD) is generated by two objects with dif-
ferent electrical charges coming into contact with each other. An elec-
trical discharge is created to neutralize this difference, which can dam-
age electronic components and printed circuit boards. The following
measures are generally sufficient to neutralize this difference before
contact is made to protect your equipment from ESD:
1-2
Chapter 1
Use a grounded wrist strap designed to prevent static discharge.
Keep all components and printed circuit boards (PCBs) in their
antistatic bags until ready for use.
Touch a grounded metal object before removing the board from
the antistatic bag.
Do not let components or PCBs come into contact with your
clothing, which may retain a charge even if you are wearing a wrist
strap.
Handle a board by its edges only; do not touch its components,
peripheral chips, memory modules or contacts.
When handling chips or modules, avoid touching their pins.
Put the motherboard and peripherals back into their antistatic bags
when not in use.
For grounding purposes, make sure your computer chassis provides
excellent conductivity between the power supply, the case, the
mounting fasteners and the motherboard.
After accessing the inside of the system, close the system back up
and secure it to the rack unit with the retention screws after ensur-
ing that all connections have been made.
Operating Precautions
Check package contents
Missing or damaging accessories
Please contact your vendor immediately
Motherboard damage
Please contact your vendor immediately
Prepare minimum system components
Intel Xeon @800MHz FSB Processor
At least one Registered DDR memory module
At least one SATA or IDE HDD
EPS12V Power Supply with 460W or above
1-3
Overview
DN800 Motherboard
O v e r v i e w
Getting Help
If a problem arises with your system during Installation or Operation,
you should first ask your dealer for help as they have most likely config-
ured your system. They generally have the best grasp of your issues and
the fastest response for your symptoms. If your dealer is near your location,
it is recommended that you first bring your system to them to have it ser-
viced instead of attempting to solve the problem yourself.
If those options don’t work for you, IWILL also provides some helpful
resources to help you.
1. Visit IWILL®website at http://www.iwill.net and navigate to this
product’s page which contain links to product updates such as Jumper
settings or BIOS updates.
2. The FAQ (Frequently Asked Questions) sections in the IWILL
website are often helpful since other users often have the same
questions.
tions within 5 business days.
1-4
This manual suits for next models
2
Table of contents
Other IWILL Motherboard manuals
IWILL
IWILL P4DA User manual
IWILL
IWILL DH800 User manual
IWILL
IWILL dca200 User manual
IWILL
IWILL DP6NS User manual
IWILL
IWILL VX133u User manual
IWILL
IWILL KK400 Series User manual
IWILL
IWILL K7S2 Series User manual
IWILL
IWILL piils User manual
IWILL
IWILL BD100 Plus User manual
IWILL
IWILL WO2 Original operating instructions
IWILL
IWILL KK266 User manual
IWILL
IWILL KK266plus-R Original operating instructions
IWILL
IWILL DVD266u-RN User manual
IWILL
IWILL DP400 User manual
IWILL
IWILL P4G Series User manual
IWILL
IWILL wa133 User manual
IWILL
IWILL DPX2-S320 User manual
IWILL
IWILL DVD266 User manual
IWILL
IWILL mp4s Original operating instructions
IWILL
IWILL LE370 User manual
