IOGear GCS932UB User manual
Installation
Installation Guide
2-Port USB DVI-D Cable KVM Switch
with Audio and Microphone Support
GCS932UB
PART NO. M1103
3
Table of Contents
Package Contents 4
System Requirements 5
Overview 6
Standard Installation 7
Advanced Installation 9
LED Indication 12
Port Switching 13
Hotkeys Summary Table 14
Autoscan Interval Table 16
Mac Keyboard Emulation 17
Sun Keyboard Emulation 18
Factory Default Settings 19
Firmware Upgrade 20
Upgrade Fail 24
Federal Communications Commission (FCC)
Statement
25
CE Statement 27
SJ/T 11364-2006 28
Limited Warranty 29
Contact 30
4
Package Contents
1 x 2-Port USB DVI-D Cable KVM Switch•
1 x Remote Switch Button•
1 x Installation Guide•
1 x Warranty Card•
5
System Requirements
Console
DVI-D supported monitor•
USB keyboard and mouse•
Powered speakers and microphone (optional)•
Computers
Two USB ports•
A DVI-D supported connection•
3.5mm audio and microphone connections•
(optional)
Operating System
Windows XP•
Windows Vista (32bit/64bit)•
Windows 7•
Mac OS X or greater•
Sun Solaris workstation•
Linux, UNIX and other USB supported systems*•
*Additional drivers and support may be needed
6
Overview
Remote Switch Button1.
CPUs Mic. connection2.
CPUs Audio connection3.
CPUs DVI-D connection4.
CPUs USB Mouse connection5.
CPUs USB Keyboard connection6.
Remote Switch Button Port7.
Console USB Mouse Port8.
Console USB Keyboard Port9.
LEDs10.
Console DVI-D Video Port11.
Console Mic. Port12.
Console Audio Port13.
21 3 64 5
12 13117 8 9
10
7
Step 1
Please make sure your computers and monitor are
powered off before you start.
Step2
Connect the DVI cable from your monitor to the
console DVI monitor port. Then, turn on the
monitor.
Step 3
Connect your USB keyboard and mouse to the
console USB keyboard port and console USB
mouse port. If you would like to use the remote
switch button, please connet it to the remote
Standard Installation
8
switch button port.
Step 4
Connect your powered speaker and mic. to the
console audio port and console mic. Port.
Step 5
Connect a set of your molded KVM cable to each of
your computers – DVI cable to the DVI output, USB
cables to open USB ports from your computer,
audio cable to your audio output and mic. cable to
the mic. input.
Final Step
9
Step 1
Please make sure your computers and monitor are
powered off before you start.
Step2
Connect the DVI cable from your monitor to the
console DVI monitor port. Then, turn on the
monitor.
Step 3
Connect your USB keyboard to the console USB
keyboard port. If you would like to use the remote
switch button, please connet it to the remote switch
button port.
Advanced Installation
10
Step 4
Connect a powered USB hub to the console mouse
port, then connect the mouse to any available USB
port in the hub. Then, connect any peripherals that
you want to share between your computers to the
other available USB ports in the hub.
Note: Please make sure mouse emulation has been
disabled for this setup to function correctly.
Step 5
Connect your powered speaker and mic. to the
console audio port and console mic. Port.
Table of contents
Other IOGear Switch manuals
IOGear
IOGear GCS1002 User manual
IOGear
IOGear MiniView G-CS102U User manual
IOGear
IOGear GCS1808 User manual
IOGear
IOGear GUH326 User manual
IOGear
IOGear GCS1212TAA4 User manual
IOGear
IOGear Q1339 User manual
IOGear
IOGear GUB231 User manual
IOGear
IOGear GUH326 User manual
IOGear
IOGear G-FH300 User manual
IOGear
IOGear GCS1212TAA User manual
IOGear
IOGear MicroHub GUH274W1 Configuration guide
IOGear
IOGear GUH227 User manual
IOGear
IOGear MiniView GCS612A User manual
IOGear
IOGear GCS1808i User manual
IOGear
IOGear GCS1214TAA3 Service manual
IOGear
IOGear GCS1902 User manual
IOGear
IOGear MiniView GCS1742 User manual
IOGear
IOGear GCS1942 User manual
IOGear
IOGear MiniView Ultra GCS138 User manual
IOGear
IOGear M1323-a User manual
