IOGear GUWIP204 User manual
1
GUWIP204
Part No. M1172-a
Installation
Installation Guide
Wireless 4-Port USB Sharing Station
©2011 IOGEAR®. All Rights Reserved. PKG-M1172-a
IOGEAR, the IOGEAR logo, MiniView, VSE are trademarks or registered trademarks of IOGEAR. Microsoft and Windows
are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines, Inc.
Macintosh, G3/G4 and iMac are registered trademarks of Apple Computer, Inc. IOGEAR makes no warranty of any kind with
regards to the information presented in this document. All information furnished here is for informational purposes only and
is subject to change without notice. IOGEAR assumes no responsibility for any inaccuracies or errors that may appear in this
document.
Table of Contents
Package Contents 4
System Requirements 5
Product Overview 6
Hardware Installation 7
Windows Software Installation 10
Mac Software Installation 11
Conguration 14
General Settings 17
WirelessConguration-WEP 18
WirelessConguration-WPA/WPA2 20
AdministratorConguration 21
Maintenance 23
ConnecttoanattachedUSBdevice 24
RequesttoConnect 25
DisconnectingaUSBdevice 27
Auto-ConnectPrinter 28
Network Scanner 31
Firmware Upgrade 35
Troubleshooting 38
Limited Warranty 46
Federal Communications Commission (FCC)
Statement 47
CE Statement 48
Contact 49
4
5
Package Contents
1xWireless4-portUSBSharingStation
1 x Installation Manual
1 x Installation CD
1 x Warranty / Registration card
1 x Power Adapter
4
5
System Requirements
Computer:
CPU of 1.7GHz and above•
Minimum512MBRAM•
Windows XP/Vista /7•
Mac OSX 10.6 and up•
Availablewirelessrouterinhome/ofcenetwork•
Supported Devices:
PrinterorMulti-functionprinterwithUSBconnection*•
External USB hard drive•
USBwebcam*•
USBashdrive•
USB memory card reader•
USB printer•
USB scanner•
*SomeUSBdevicesrequireadirectconnectiontothecomputerforoptimumperformance
6
7
USB connection LED1.
USB port located on the front2.
On/Off Switch3.
Power adapter connector4.
Product Overview
127
3 4 5
Reset button5.
Network port6.
USB ports located on the back7.
Antenna8.
68
6
7
NOTE: Before you connect your USB device to the GUWIP204, please refer to the user manual
and install the driver on your computer rst, for example the driver for your printer. When the
installation is completed, safely disconnect your USB devices from your computer. Disconnect
the power source from USB devices.
Connect your USB device to any one of the USB ports on the USB Sharing Station1.
Hardware Installation
USB device (not included)
8
9
ConnecttheGUWIP204totherouterorswitchwiththeincludedEthernetcable.2.
router (not included)
8
9
ConnectthepoweradaptertotheGUWIP204andturnitonusingtheon/offswitch.TheUSBconnectionLEDwill3.
turn on indicating that unit is correctly connected to the network. Turn on your USB device.
10
Windows Software Installation
Please insert the driver CD into your
Windows based PC. The CD should auto
play and bring up the software installer.
Ifyouhavedisabledtheauto-play
function, please browse the CD and
install the driver program manually.
Follow the instructions of the wizard to
complete the installation process. Once
the installation is complete, click “Finish”
to launch the application.
Table of contents
Other IOGear Switch manuals
IOGear
IOGear GCS1808i User manual
IOGear
IOGear MiniView GCS52U User manual
IOGear
IOGear GUS4C2 User manual
IOGear
IOGear GDPSP2 User manual
IOGear
IOGear GUB231 User manual
IOGear
IOGear GHDMIS4 User manual
IOGear
IOGear GCS1932M Operating and maintenance instructions
IOGear
IOGear GCS1716 User manual
IOGear
IOGear UpStream Pro User manual
IOGear
IOGear GCS1953 User manual
IOGear
IOGear GCS1942H User manual
IOGear
IOGear MiniView GCS1742 User manual
IOGear
IOGear GCS1108 User manual
IOGear
IOGear MiniView G-CS12 User manual
IOGear
IOGear GCS82B/GCS84B User manual
IOGear
IOGear GUH326 User manual
IOGear
IOGear 8-Port DVI KVMP Switch User manual
IOGear
IOGear HUB-C+ User manual
IOGear
IOGear Q1323-a User manual
IOGear
IOGear GCS942UW6-Q0580 User manual
