Interlogix ZeroWire User manual

P/N 466-2520 • REV 01 • DRAFT 00.05

This document may not be copied in whole or in part or otherwise

reproduced without prior written consent from UTC Fire & Security

Americas Corporation, Inc., except where specifically permitted

under US and international copyright law.

Trademarks and

patents Trade names used in this document may be trademarks or

registered trademarks of the manufacturers or vendors of the

respective products.

Manufacture

Placed on the market by:

UTC Fire & Security Americas Corporation, Inc.

3211 Progress Drive, Lincolnton, NC, 28092, USA

Authorized EU manufacturing representative:

UTC Fire & Security B.V.

Kelvinstraat 7, 6003 DH Weert, Netherlands

EU compliance

EU directives UTC Fire & Security hereby declares that this device is in

compliance with the applicable requirements and provisions of one

or more of the Directives 1999/5/EC, 2014/30/EU and 2014/35/EU.

For more information see: www.utcfireandsecurity.com.

2002/96/EC (WEEE directive): Products marked with this symbol

cannot be disposed of as unsorted municipal waste in the European

Union. For proper recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see:

www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that

cannot be disposed of as unsorted municipal waste in the European

Union. See the product documentation for specific battery

information. The battery is marked with this symbol, which may

include lettering to indicate cadmium (Cd), lead (Pb), or mercury

(Hg). For proper recycling, return the battery to your supplier or to a

designated collection point. For more information see:

www.recyclethis.info.

Contact information For contact information, see www.utcfireandsecurity.com

Customer support For customer support in EU, see www.utcfssecurityproducts.eu.

ZeroWire Installation Manual i

Content

Important information iii

Limitation of liability iii

Advisory messages iii

Welcome 1

Features and benefits 1

Your new security system 2

Optional parts: 2

Front of ZeroWire 3

Back of ZeroWire 4

Install Your ZeroWire 5

What You Need 5

Choose a Location 5

Install the Battery 5

Install Cellular Radio 6

Install ZeroWire on Wall 6

Connect Power 8

Add Your Sensors 9

Unpack Sensors 9

Learning Sensors into ZeroWire 9

Install Sensor in Home 9

Remove a Sensor 10

Add Users and Keyfobs 11

Introduction 11

Add a User 11

Add a Key Fob 11

Remove a User 12

Change User Type 12

Customize Your ZeroWire 13

Volume Level 13

Voice Annunciation 13

Full Menu Annunciation 13

Backlight Level 14

Change Time and Date 14

Adjust Partition Entry or Exit Times 15

Configure Sensor Names 15

Record Sensor Names 16

Maintenance 17

System Tests 17

ii ZeroWire Installation Manual

Perform a Walk Test 17

Perform a Siren Test 17

Perform a Battery Test 18

Perform a Communicator Test 18

Advanced Installation 19

Reset to Factory Default 19

Reset Installer Account 19

Switch Connection Modes 19

ZeroWire Web Server 20

Connecting Inputs 31

Connecting Outputs 32

Changing Keyfob Options 34

Add IP Cameras 34

Viewing Cameras 35

Programming Cameras 36

View Camera Clips 38

Add Z-Wave Devices 39

Access via UltraConnect App 40

Using the App 42

DLX900 Software 45

System Status Messages 47

UltraConnect App Status and Error Messages 48

Voice Library 50

ZeroWire Menu Tree 51

Upgrading Firmware using USBUP 52

Upgrading Firmware using DLX900 53

Specifications 54

Index 55

ZeroWire Installation Manual iii

Important information

Limitation of liability

To the maximum extent permitted by applicable law, in no event will UTCFS be

liable for any lost profits or business opportunities, loss of use, business

interruption, loss of data, or any other indirect, special, incidental, or

consequential damages under any theory of liability, whether based in contract,

tort, negligence, product liability, or otherwise. Because some jurisdictions do not

allow the exclusion or limitation of liability for consequential or incidental

damages the preceding limitation may not apply to you. In any event the total

liability of UTCFS shall not exceed the purchase price of the product. The

foregoing limitation will apply to the maximum extent permitted by applicable law,

regardless of whether UTCFS has been advised of the possibility of such

damages and regardless of whether any remedy fails of its essential purpose.

Installation in accordance with this manual, applicable codes, and the instructions

of the authority having jurisdiction is mandatory.

While every precaution has been taken during the preparation of this manual to

ensure the accuracy of its contents, UTCFS assumes no responsibility for errors

or omissions.

WARNING: The equipment should only be operated with an approved power

adapter with insulated live pins.

Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of

batteries according to the instructions. Contact your supplier for replacement

batteries.

Advisory messages

Advisory messages alert you to conditions or practices that can cause unwanted

results. The advisory messages used in this document are shown and described

below.

WARNING: Warning messages advise you of hazards that could result in injury

or loss of life. They tell you which actions to take or to avoid in order to prevent

the injury or loss of life.

Caution: Caution messages advise you of possible equipment damage. They tell

you which actions to take or to avoid in order to prevent the damage.

Note: Note messages advise you of the possible loss of time or effort. They

describe how to avoid the loss. Notes are also used to point out important

information that you should read.

ZeroWire Installation Manual 1

Welcome

Thank you for purchasing ZeroWire!

ZeroWire can be set up in 4 steps and the voice guide will walk you through each

of the menus and settings.

Installyour

ZeroWire

Addyour

sensors

Addusers

&keyfobs

Customize

your

system

Instead of using the keys on the front of ZeroWire, you can also set up the

system with the built-in web server interface using a browser (see "ZeroWire

Web Server" on page 20).

Please read through this guide before starting the installation.

Features and benefits

• 255 Users – enough for even moderate sized businesses

• 64 Sensors + 25 Keyfobs – provides a large coverage area

• 8 Partitions – split your system into smaller parts you can protect individually

• Dynamic Key Lighting – lights up the available options to make it easier to

program

• Personal Voice Guide – steps you through customizing your system

• 2 Inputs – integrate non-wireless devices to your security system

• 2 Programmable Outputs – connect other devices such as siren and strobe

• Loud internal piezo siren – warns intruders they have been detected and

encourages them to leave quickly

• Modern self contained unit – all in one box

• Battery backup – your property is still protected if there is a loss of power

• 802.11 b/g WiFi – enables remote access via a web browser or smart phone

• IEEE 802.3 Compliant Ethernet – use hardwired cable instead of wireless, the

choice is yours

• 3G Cellular radio support – allows reporting alarm messages without a fixed

line telephone service

2 ZeroWire Installation Manual

Your new security system

Check that everything is complete before beginning your installation. If anything

is missing please contact the customer service.

• ZeroWire with Wall Bracket

• 9 VDC Power Pack

• Backup Battery Pack

• Input/Output Lead

• Installation Manual (this document)

• User Manual

• Quick Reference Guide

Optional parts:

• ZW-ANT3M Extension Antenna

• ZW-DS01 Desk Stand

• ZW-HSPA Cellular Modem

• Wireless Sensors

• Wireless Keyfobs

Installation

Manual

(this

document

)

User

Manual

Quick

Reference

Sheet

Reference

Guide

(online)

ZeroWire Installation Manual 3

Front of ZeroWire

Key

Colour Description



ALARM

Red System is in alarm. Enter your

PIN code then ENTER to turn off

the alarm. Press STATUS key for

more info.



STAY

Not lit System is disarmed if Away is

also not lit. Press the STAY key

to arm in Stay mode.

Yellow System is armed in the “STAY”

mode.



STATUS

Green System is normal.

Yellow Non-urgent system conditions

present. Press the STATUS key

to hear system conditions.

Red

(steady)

Urgent system conditions

present.

Touch the STATUS key to hear system

messages. If you are unable to fix the issue,

contact your service provider for help.



AWAY

Not lit System is disarmed if Stay is also

not lit. Press the AWAY key to arm

in Away mode.

Red System is armed in the “AWAY”

mode.



READY

Not lit System cannot be armed, press

STATUS key for more info.

Key

Colour Description



READY

Green

(steady)

ll sensors are ready and the

system can be armed in Away or

Stay mode.

Green

(flashing)

Sensors are currently unsealed but

system is force-armable. If these

sensors are not sealed by the end

of the exit time the system will go

into alarm.



BYPASS

Press the BYPASS key if you wish to isolate

(ignore) a sensor. Bypassed sensors will not

be active when you arm the system in Stay or

way modes.



CHIME

Press the CHIME key to select which sensors

will make a doorbell sound on the ZeroWire

when they are tripped.



HISTORY

Press the HISTORY key to listen for alarm

and event history.

FIRE

MEDICAL

POLICE

Feature must be enabled by your security

provider. Check what response will be

provided. Hold down the key to send a

message to a central monitoring centre.

Enter your PIN code then ENTER to turn off

a SOS alarm.

4 ZeroWire Installation Manual

Back of ZeroWire

Connections for the cellular radio module are located under the cover on the right.

Other manuals for ZeroWire

Table of contents

Other Interlogix Security System manuals

Interlogix

Interlogix RF-7220-07-1 Assembly instructions

Interlogix

Interlogix advisorone User guide

Interlogix

Interlogix advisorone User manual

Interlogix

Interlogix ZeroWire User manual

Interlogix

Interlogix ATS111 A Series Assembly instructions

Interlogix

Interlogix AS620RF Assembly instructions

Interlogix

Interlogix Alliance system User manual

Interlogix

Interlogix TX-7211-05-1 Assembly instructions

Interlogix

Interlogix 60-578 User manual

Interlogix

Interlogix ITI Simon User manual

Interlogix

Interlogix ATSx500A Series Assembly instructions

Interlogix

Interlogix ACL805SUW-BS User manual

Interlogix

Interlogix UltraView UVC-6120-1 User manual

Interlogix

Interlogix Simon XT User manual

Interlogix

Interlogix ZeroWire User manual

Interlogix

Interlogix Simon XT User manual

Interlogix

Interlogix ATS125 Operating instructions

Interlogix

Interlogix Simon XTi-5 Version 2 User manual

Interlogix

Interlogix ZEROWIRE ZW-6404 User manual

Interlogix

Interlogix 600-6520-95 User manual

Interlogix

Interlogix Simon XT User manual

Interlogix

Interlogix AL602ITI User manual

Interlogix

Interlogix ZeroWire Instruction manual

Interlogix

Interlogix xgen Operating instructions

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual