ICP DAS USA M-7033 User manual

M-7033 3 Channel RTD DAQ Module - QuickStart (May/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

M-7033

3 Channel RTD Input Data Acquisition

Module

Quick Start Guide

Product Website:

https://www.icpdas-usa.com/m_7033.html

http://www.icpdas-usa.com/dcon_utility_pro.html

1. Introduction

The M-7033 is a 3-channel RTD Input module that is used for measuring temperatures

via an RTD sensor and supports Pt100, Ni120, and Pt1000 type sensors. The module

allows 2/3/4-wire RTD connections and features open wire detection. In addition, the M-

7033 also includes 3000 VDC intra-module isolation, and supports lead resistance

elimination for 3/4-wire connections.

2. Terminal Assignment

M-7033 3 Channel RTD DAQ Module - QuickStart (May/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

3. Block/ Wiring Diagram

4. Default Settings

Default settings for the M-7024 module are as follows:

▫Protocol: Modbus RTU

▫Module address: 01

▫Analog output type: 0 ~ +10 V

▫Baud Rate: 9600 bps

▫Engineering unit format

M-7033 3 Channel RTD DAQ Module - QuickStart (May/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

5. Configuration

To install the module, follow the steps below:

1. Connect the thermistor analog input.

2. Connect the module to the RS-485 network using the DATA+ and DATA- terminals. If

the host is only equipped with an RS-232 interface, then an RS-232 to RS-485

converter will be required.

3. Connect the module to the power supply using the +Vs and GND terminals. Note that

the voltage supplied should be in the range of +10 to +30V DC.

4. Open DCON utility pro

click on COM port(first icon).

It can select multi-options such as Baud Rate, Protocol, Checksum, and Format to

search module. The default settings for the module can be found in Section 3. Click OK

after selecting the COM port setting.

M-7033 3 Channel RTD DAQ Module - QuickStart (May/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

5. DCON utility pro will search for the selected COM port according the setting

previously set. DCON Utility Pro supports DCON and Modbus protocol for all ICPDAS

and the others modules.

6. Configuration I/O module setting on PC

M-7033 3 Channel RTD DAQ Module - QuickStart (May/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

7. For M-7000 modules using the Modbus RTU protocol, configure the module using the

following functions.

Sub-function 04h of Function 46h, see user manual Section 3.3.2

Sub-function 06h of Function 46h, see user manual Section 3.3.4

Sub-function 08h of Function 46h, see user manual Section 3.3.6

For M-7000 modules using the Modbus RTU protocol, use Function 04h to read the

data from the input channels. See user manual Section 3.2 for details.

M-7033 3 Channel RTD DAQ Module - QuickStart (May/2018)

ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

8. If user doesn’t know command, user can select Address and ID, it will show some

refer commands as below. User can select necessary command to test or debug

modules.

Table of contents

Other ICP DAS USA Control Unit manuals

ICP DAS USA

ICP DAS USA tM-AD8C User manual

ICP DAS USA

ICP DAS USA I-7016 User manual

ICP DAS USA

ICP DAS USA ET-7200 Series User manual

ICP DAS USA

ICP DAS USA PM-4324 Series User manual

ICP DAS USA

ICP DAS USA LinPAC-51 Series User manual

ICP DAS USA

ICP DAS USA WF-2051 User manual

ICP DAS USA

ICP DAS USA GTM-204M-4G User manual

ICP DAS USA

ICP DAS USA M-7067D User manual

ICP DAS USA

ICP DAS USA M-7026 User manual

ICP DAS USA

ICP DAS USA M-7016 User manual

ICP DAS USA

ICP DAS USA I-7045 User manual

ICP DAS USA

ICP DAS USA GTP-230 User manual

ICP DAS USA

ICP DAS USA PET-7261 User manual

ICP DAS USA

ICP DAS USA M-7067 User manual

ICP DAS USA

ICP DAS USA tSH-700 Series User manual

ICP DAS USA

ICP DAS USA XP-8000-Atom-CE6 User manual

ICP DAS USA

ICP DAS USA ZT-257 Series User manual

ICP DAS USA

ICP DAS USA DS-2200 Series User manual

ICP DAS USA

ICP DAS USA I-7052D User manual

ICP DAS USA

ICP DAS USA HRT-370 User manual

ICP DAS USA

ICP DAS USA I-7045D User manual

ICP DAS USA

ICP DAS USA DS-700 Series User manual

ICP DAS USA

ICP DAS USA ET-7218Z User manual

ICP DAS USA

ICP DAS USA PM-3133-RCT Series User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual