HunterDouglas RB 500 User manual

SURFACE/WALL MOUNT

Las Vegas • Chicago

800.229.5300

HDhospitality.com

020519

END PLATES

INSTALLING A POCKET

BOTTOM CLOSURES

TOOLS NEEDED

Pencil Level

Measuring

Tape Drill with

bits

Screwdriver

Pocket Installation - 5.25" Single and 9" Single and Dual Shades

Manual

Single

Shade

Dual Shade

9” Pocket Only

Motorized

Single

Shade

Manual

Bracket

55L or 75L

Motor

Bracket

55L or 75L

Surface Mounted

Use bracket and shade instructions for

Standard+ & Heavy Duty+ Manual

Surface Mounted

Use bracket and shade instructions for

RB 500 Heavy Duty Bracket Motorized

Surface Mounted

Use bracket and shade instructions for

Heavy Duty+ 7" Dual Bracket Motorized or Manual

Mount into wood or metal studs

or into concrete with concrete

anchors. Drywall anchors are not

recommended.

Determine the mounting location.

Pre-drill the pocket. Mount in

place.

Use a screwdriver to attach

the end plates with the

screws provided.

Tilt the bottom closure inside the

front edge of the pocket until the

closure catches on the inside ledge.

7" Dual

Motor

Bracket

Side View

1 of 3

7" DUAL BRACKETS IN A 9" POCKET

Las Vegas • Chicago

800.229.5300

HDhospitality.com

OPTIONAL: INTEGRATED LEVELER

ADJUST LEVELERIDLE END

TOOLS NEEDED

INSTALLING THE BRACKETS

Pencil Level

Measuring

Tape Drill with

bits

Allen Key

(provided with

optional Leveler)

Screwdriver Pliers

040419

MOTORS

Sonesse 50 RTS 506S2 & 510S2 120V AC

Plug-In

Quick Disconnect

Motor Front Plate

(comes attached to motor)

Determine the mounting location inside the pocket.

Measure and mark the bracket locations with a pencil.

Mount brackets with the screws provided. Pre-drilling is

recommended.

Check that the brackets are level and aligned.

Insert the provided Allen key into the set screw of the leveler.

Adjust skewing by turning the Allen key left or right to move

the shade up or down. Support the shade with your hand if

necessary.

All adjustments can be made after the shade has been

installed and after the operation has been tested.

Sonesse 50 RTS 506S2 & 510S2 Motor with 7" Dual Brackets in 9" Pocket

Motorized Shade Installation Series 5-216 Compatible Motors

LT50 RA 525A2

LT50 Altus RTS 525A2

Sonesse 50 RTS 506S2

Sonesse 50 DCT 506S2

Sonesse 50 RA 506S2

Sonesse 50 RS485 506S2

Sonesse 50 RTS 510S2

Sonesse 50 DCT 510S2

Sonesse 50 RA 510S2

Sonesse 50 RS485 510S2

Sonesse ULTRA 50 RTS 506A2

Sonesse ULTRA 50 RA 506A2

Sonesse ULTRA 50 RS485 506A2

LT50 RS485 515S2

LT50 RS485 535A2

Sonesse ULTRA 50 DC RTS 504A8

Sonesse 50 DC RS485 504A8

Sonesse 30 RTS

Sonesse 30 DCT

Sonesse 30 RS485

2 of 3

click

LOCK THE SHADE

INSTALLING THE SHADE - Do not remove the tape around the shade until it is fully installed

CHECK SHADE

OPERATION

Las Vegas • Chicago

800.229.5300

HDhospitality.com

UNLOCKED LOCKED

MOTOR BRACKET

Push the shade against the

idle end and lift the roller

shade up until the motor

front plate ﬁts into the

motor bracket.

Turn the roller shade approximately

10˚ in the rolling direction and close

both fasteners of the brackets.

Repeat to install the front shade.

Rotate the nut on the

idle end clockwise

until it meets the tube.

This locks the shade

into position.

Remove the tape from the shade.

Make sure the shade operates properly. Use separate

wiring information per motor type and programing

instructions from HDhospitality.com

Adjust leveler if applicable.

Sonesse 50 RTS 506S2 & 510S2 Motor with 7" Dual Brackets in 9" Pocket

Motorized Shade Installation Series 5-216

SHADE REMOVAL

UNLOCK THE SHADEDISCONNECT THE MOTOR

Rotate the nut on the

idle end

counterclockwise to

unlock the shade.

RELEASE THE SHADE

Disconnect the power cable

from the electrical source.

Plug-in: Unplug from the

outlet

Quick Disconnect: Unplug the

quick disconnect cables

Wired to the junction box:

Electrician is required

Open the bracket fasteners.

Turn the shade in the roll up direction until the

motor front plate releases.

Push the shade in the direction of the idle bracket

to slide it out of the bracket and down to remove it

completely.

3 of 3

Other HunterDouglas Window Blind manuals

HunterDouglas

HunterDouglas 5-216 User manual

HunterDouglas

HunterDouglas EverWood User guide

HunterDouglas

HunterDouglas RB 500 User manual

HunterDouglas

HunterDouglas PowerView User manual

HunterDouglas

HunterDouglas PowerView Gen 3 User manual

HunterDouglas

HunterDouglas Pirouette PowerView+ Gen 3 Automation Parts list manual

HunterDouglas

HunterDouglas Blockout User manual

HunterDouglas

HunterDouglas VS 100 Guide rail Maintenance and service guide

HunterDouglas

HunterDouglas Decor Standard Cordlock Owner's manual

HunterDouglas

HunterDouglas Wood Blinds User manual

HunterDouglas

HunterDouglas ZIP 100 Maintenance and service guide

HunterDouglas

HunterDouglas Sonnette Parts list manual

HunterDouglas

HunterDouglas Palmetto Horizontal Shadings Manual

HunterDouglas

HunterDouglas Solera Soft Shades User manual

HunterDouglas

HunterDouglas Alustra Woven Textures ST30 Parts list manual

HunterDouglas

HunterDouglas 5-257 User manual

HunterDouglas

HunterDouglas 5-151 User manual

HunterDouglas

HunterDouglas Skyline Parts list manual

HunterDouglas

HunterDouglas PowerView Parts list manual

HunterDouglas

HunterDouglas Silhouette Nantucket PowerView Gen 3... Parts list manual

HunterDouglas

HunterDouglas Luminette Privacy Sheers Parts list manual

HunterDouglas

HunterDouglas Cadence Parts list manual

HunterDouglas

HunterDouglas Specialty Motorized Vertical Blinds Parts list manual

HunterDouglas

HunterDouglas WOODMATES User manual

Popular Window Blind manuals by other brands

Jysk

Jysk ROGEN manual

SOMFY

SOMFY 1241752 instructions

Rollos

Rollos S-Nanorollo V2 Assembly and operating instruction

Teptron

Teptron Move user manual

Renson

Renson Outdoor Loggia Manual Installation

Project Source

Project Source CDLF2342W quick start guide

Domondo

Domondo PureNight Mounting guide

rollease acmeda

rollease acmeda Easy Spring Air Assembly and installation manual

IKEA

IKEA KADRILJ manual

Hallis Hudson

Hallis Hudson Rolls Super glide instructions

Benthin

Benthin P1614 quick start guide

MV LINE

MV LINE CLARA 015 Installing instructions

Current

Current E-WAND Installation manual and user's guide

weinor

weinor VertiTex ZipR Maintenance Instructions and Directions for use for the end user

Roto

Roto ZAR M R4/R7 Mounting instructions

SOMFY

SOMFY Movelite WT Series instructions

Acmeda

Acmeda RF400 Series instructions

Motura

Motura Pli_353/3 manual