HunterDouglas RB 500 Safety guide

Standard+ and Heavy Duty+ Manual Clutch Installation

Mount into wood or metal studs or into concrete with concrete anchors.

Drywall anchors are not recommended.

Determine the mounting location.

a) surface/wall b) ceiling c) on frame d) in recess

Measure and mark the bracket locations with a pencil.

Mount brackets with the screws provided. Pre-drilling is recommended.

Check that the brackets are level and aligned.

STANDARD+ BRACKETS

STANDARD+ BRACKET HEAVY DUTY+ BRACKET

HEAVY DUTY+ BRACKETS

Las Vegas • Chicago

800.229.5300

HDhospitality.com

1 of 3

Insert the provided Allen key into the set screw

of the leveler.

Adjust skewing by turning the Allen key left or

right to move the shade up or down. Support

the shade with your hand if necessary.

All adjustments can be made after the shade

has been installed and after the operation has

been tested.

OPTIONAL: INTEGRATED LEVELER

ADJUST LEVELER

TOOLS NEEDED

INSTALLING THE BRACKETS

Pencil Level

Measuring

Tape Drill with

bits

Allen Key

(provided with

optional Leveler)

Screwdriver Pliers

Ensure the leveling set screw

opening is pointing downwards

before installing the bracket.

On the Standard+ Bracket, the

orientation can be changed by

loosening the two screws (M3x6)

and turning the leveler 90°. Fix

the screws after turning.

Rotate the nut on

the idle end

clockwise until it

meets the tube.

This locks the shade

into position.

Slide the screw cover

over the bracket until

it snaps in place.

HEAVY DUTY+ BRACKET SCREW COVERS

LOCK THE SHADE

Place the clutch

onto the clutch

bracket.

Push the shade

against the clutch

end and lift the roller

shade up until the end

plug ﬁts into the center

of the idle bracket.

SCREW COVER INSTALLATION

Standard+ and Heavy Duty+ Manual Clutch Installation 2 of 3

INSTALLING THE SHADE - Do not remove the tape around the shade until it is fully installed

CHECK SHADE

OPERATION

Las Vegas • Chicago

800.229.5300

HDhospitality.com

CLUTCH BRACKET IDLE BRACKET

UNLOCKED

CORD TENSIONER

INSTALLATION

BALL STOP

INSTALLATION

LOCKED

Remove the tape from the shade.

Make sure the shade operates properly.

Pull the front chain down to raise the shade.

Pull the back chain down to lower the shade.

Adjust leveler if applicable.

SET LOWER LIMIT

Lower shade to the bottom of the window opening.

Place a ball stop over the chain in front of the clutch

and secure using pliers.

SET UPPER LIMIT

Raise shade to the desired height.

Place a ball stop over the chain in back of the clutch

and secure using pliers.

Be sure the cord tensioner is not placed in the path of the bottom

rail and fabric.

Unlock the cord tensioner by removing the plug from the screw hole

and pushing down.

Hold the cord tensioner ﬁrmly in place and check that the bead chain,

ball stop, and chain connector can move freely through it. The chain

should not be taught.

Mark the screw hole with a pencil. Attach the cord tensioner directly

to the wall using a 1½” screw. Use a wall anchor if necessary.

click

Slide the end caps onto

the brackets. Snap the end caps onto the brackets until it clicks into

place.

Move the shade

downward and out

of the clutch bracket.

Slide the end cap towards you

to remove from the bracket.

Lift the backside of the endcap away from the bracket,

then slide the end cap towards you.

Rotate the nut

on the idle end

counterclockwise

to unlock the shade.

Slide a ﬂat head

screwdriver between

the idle end plug and

bracket and push

towards the clutch

end to remove the

plug from the bracket.

BRACKET COVER INSTALLATION

Standard+ and Heavy Duty+ Manual Clutch Installation 3 of 3

BRACKET COVER REMOVAL

SHADE REMOVAL

UNLOCK THE SHADE REMOVE IDLE END REMOVE CLUTCH END

STANDARD+ END CAPS HEAVY DUTY+ END CAPS

Las Vegas • Chicago

800.229.5300

HDhospitality.com

STANDARD+ BRACKET HEAVY DUTY+ BRACKET

Other manuals for RB 500

This manual suits for next models

Other HunterDouglas Window Blind manuals

HunterDouglas

HunterDouglas LiteRise User manual

HunterDouglas

HunterDouglas Designer Roller Shades Parts list manual

HunterDouglas

HunterDouglas Luminette Privacy Sheers Parts list manual

HunterDouglas

HunterDouglas Provenance Woven Wood Shades Parts list manual

HunterDouglas

HunterDouglas Standard Hardware System Parts list manual

HunterDouglas

HunterDouglas Luxaflex PowerView User manual

HunterDouglas

HunterDouglas 5-257 User manual

HunterDouglas

HunterDouglas PowerView Parts list manual

HunterDouglas

HunterDouglas Silhouette Nantucket PowerView Gen 3... Parts list manual

HunterDouglas

HunterDouglas Country Woods Operation manual

HunterDouglas

HunterDouglas Silhouette Duolite UltraGlide User manual

HunterDouglas

HunterDouglas Nantucket EasyRise Operation manual

HunterDouglas

HunterDouglas Vignette Modern Roman Shades Parts list manual

HunterDouglas

HunterDouglas Duette SkyLift User manual

HunterDouglas

HunterDouglas VS 100 Guide rail Maintenance and service guide

HunterDouglas

HunterDouglas Specialty Motorized Vertical Blinds Parts list manual

HunterDouglas

HunterDouglas Alustra Woven Textures User manual

HunterDouglas

HunterDouglas Cadence Soft Vertical Blinds Parts list manual

HunterDouglas

HunterDouglas Solera EasyRise Parts list manual

HunterDouglas

HunterDouglas SCG 64 User manual

HunterDouglas

HunterDouglas Design Studio Installation manual

HunterDouglas

HunterDouglas 5-156 User manual

HunterDouglas

HunterDouglas Wood Blinds User manual

HunterDouglas

HunterDouglas LiteRise Parts list manual

Popular Window Blind manuals by other brands

Jysk

Jysk ROGEN manual

SOMFY

SOMFY 1241752 instructions

Rollos

Rollos S-Nanorollo V2 Assembly and operating instruction

Teptron

Teptron Move user manual

Renson

Renson Outdoor Loggia Manual Installation

Project Source

Project Source CDLF2342W quick start guide

Domondo

Domondo PureNight Mounting guide

rollease acmeda

rollease acmeda Easy Spring Air Assembly and installation manual

IKEA

IKEA KADRILJ manual

Hallis Hudson

Hallis Hudson Rolls Super glide instructions

Benthin

Benthin P1614 quick start guide

MV LINE

MV LINE CLARA 015 Installing instructions

Current

Current E-WAND Installation manual and user's guide

weinor

weinor VertiTex ZipR Maintenance Instructions and Directions for use for the end user

Roto

Roto ZAR M R4/R7 Mounting instructions

SOMFY

SOMFY Movelite WT Series instructions

Acmeda

Acmeda RF400 Series instructions

Motura

Motura Pli_353/3 manual