Hunter 40135 User manual

Other manuals for 40135

4

Table of contents

Other Hunter Thermostat manuals

Popular Thermostat manuals by other brands

EWELLY

EWELLY EW-181 manual

Prolon

Prolon T1100 Hardware guide

Computherm

Computherm Q20 operating instructions

Heatmiser

Heatmiser neoStat user manual

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA user manual

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat user manual

Saswell

Saswell SAS920XWHB-7-S-RF User manual and warranty card

Aircalo

Aircalo TFP1-ET85P2 operating manual

Honeywell

Honeywell CM721 user manual

Carrier

Carrier DEBONAIR 33CS Installation and operating instructions

Lennox

Lennox iHarmony Zone Thermostat Installation and setup guide

Gemtech

Gemtech GT7000 Operation

Rollei

Rollei Smartes 45000 manual

Sinope

Sinope TH1300RF user guide

Honeywell

Honeywell RLV4305 owner's guide

Honeywell

Honeywell Prestige 2.0 THX9421 manual

NuTone

NuTone NTBZ48 Installation & operation guide

Stelpro

Stelpro MAESTRO ASMT402AD user guide

1

Electronic/Mechanical

Thermostat

Model 40135

installation and

operation manual

44017-01 04-01-2008

2

Our Technical Support Group is available from 8 am to 5 pm

CST. They may be reached toll-free at 1-888-830-1326.

3

Table of Contents

Important Information ....................................... 5

Tools ................................................................. 6

Uninstalling the Existing Unit............................ 9

Installing the Thermostat ................................ 12

Installing the wall plate ................................... 14

connecting the wires........................... 15

attaching the thermostat ..................... 17

Operation........................................................ 20

Indicators & Adjustments................................ 22

Troubleshooting.............................................. 25

Wiring Diagrams............................................. 27

4

Congratulations!

Thank you for choosing a Hunter thermostat.

Your new Hunter thermostat will provide years of

reliable service and year-round energy savings.

Please read this manual before beginning

installation and save this booklet for complete

operation instructions.

Electronic/Mechanical

Thermostat

Model 40135

5

This thermostat is designed to work on the following

heating and cooling systems:

Gas – Standing Pilot

Gas – Electronic Ignition

Gas – Fired Boilers

Gas – Millivolt Systems

Oil – Fired Boilers

Oil – Fired Furnace

Electric Air conditioner

Electric Furnace

This thermostat is not designed for heat pump

systems or 110/220 V baseboard heating systems.

If you are unsure what kind of heating and cooling

system you have, please contact a qualied HVAC

Technician for assistance.

IMPORTANT INFORMATION

6

This thermostat includes two #8 slotted screws and

two wall anchors for mounting.

To install your new thermostat, you will need the

following supplies:

Flat-head screwdriver

......................................................................................

Small Phillips-head screwdriver

......................................................................................

Hammer

......................................................................................

Electric drill and 3/16” bit

......................................................................................

Two fresh 1.5 Volt (AA) size alkaline batteries

......................................................................................

TOOLS

7

NOTICE! Do not disconnect the wires

from the existing thermostat before

reading these instructions. The wires

must be labeled prior to removal to

ensure proper reconnection.

8

Y

RC

G

W

Y

RC

G

W

9

1. Turn the system power OFF from the existing

thermostat. Turn the power to the HVAC

system OFF at the main power panel or at the

furnace.

2. Remove the existing thermostat cover to

access the wires from the wall.

(Some thermostats may have multiple covers, screws

or other locking devices that must be removed or

disengaged.)

3. Locate, but do not disconnect the wires.

(If wires are not visible, they may be connected to the

back of the wall plate. Some models may have doors

that open to expose the wires and mounting screws.)

UNINSTALLING THE EXISTING UNIT

10

If your existing

thermostat is marked...

label the wire

with this sticker:

RH / R / VR / 4

RH

RH

24 Volt

RC / VC

RC

RC

24 Volt Cool

Y / C* / M

Y

Y

air conditioning

compressor

W / H

W

W

heating

G / F

G

G

fan

* See pg 27 for complete wiring diagram.