HP Integrity rx2660 User manual
RX2660BOOT DISK ENTRY
Effective:
12/18/18
Revision:
A
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 1 of 11
Adding a Boot Disk Entry to an
HP Integrity rx2660
Necessary Items
•Terminal Emulator application (e.g., PuTTY).
•Hard drive to be mounted.
Overview
In order to boot an rx2660 to a “new” disk, it is necessary to add an entry to the list of devices the rx2660 will try
to boot from (i.e., add a boot entry).
•Connect to the Management Processor (MP).
•Power on the rx2660.
•From the MP, connect to the Console Terminal (CO) and watch the Power On Self Test (POST) and early
boot.
•When the Extensible Firmware Interface (EFI) Menu appears, go to Add Boot Option and add the Boot
Option for the disk.
•Still in the EFI Menu, go to Change Boot Order and move your disk to the top of the list.
•Boot from the disk.
RX2660BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 2 of 11
Details
In this example, a network connection is made to the Management Processor PDQVCA, which is in an rx2660
that plays the role of PDQVSA in the PDQ system.
1. With the rx2660 initially powered OFF (but still plugged in), insert the new hard drive into an available
slot.
2. Launch a PuTTY session and select either the Telnet or SSH radio button.
3. Connect to the MP and enter the Command Menu (CM). From any running workstation.
Admin's password:
– OR –
Admin's password:
NOTE: When using SSH, nothing appears in response to keystrokes, not even dots or asterisks.
Authentication successful.
Hewlett-Packard Integrity Integrated Lights-Out 2
(c) Copyright Hewlett-Packard Company 1999-2011. All Rights Reserved.
MP Host Name: pdqvca
Revision F.02.26
MP MAIN MENU:
CO: Console
VFP: Virtual Front Panel
CM: Command Menu
SMCLP: Server Management Command Line Protocol
CL: Console Log
SL: Show Event Logs
HE: Main Help Menu
X: Exit Connection
[pdqvca] MP> CM
4. Power up the main part of the rx2660.
[pdqvca] MP:CM> pc -on
PC -on
System will be powered on.
Confirm? (Y/[N]): y
y
-> System is being powered on.
-> Command successful.
[pdqvca] MP:CM>
RX2660BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 3 of 11
5. Return to the Main Menu (<Ctrl-b>) and go to the Console (CO) to monitor the early boot. This may take
a little while.
MP MAIN MENU:
CO: Console
VFP: Virtual Front Panel
CM: Command Menu
SMCLP: Server Management Command Line Protocol
CL: Console Log
SL: Show Event Logs
HE: Main Help Menu
X: Exit Connection
[pdqvca] MP> co
[Use Ctrl-B or ESC-( to return to MP main menu.]
- - - - - - - - - - Prior Console Output - - - - - - - - - -
* POST-MISERnet startup at 21-NOV-2018 10:45:56.58 *
*******************************************************************
SYSTEM job terminated at NOVEMBER 21, 2018 10:45 AM
Accounting information:
Buffered I/O count: 9029 Peak working set size: 9824
Direct I/O count: 3561 Peak virtual size: 250112
Page faults: 22792 Mounted volumes: 0
Charged CPU time: 0 00:00:02.49 Elapsed time: 0 00:00:31.53
- - - - - - - - - - - - Live Console - - - - - - - - - - - -
***********************************************************
* ROM Version : 04.32
* ROM Date : 05/21/2013
* BMC Version : 05.26
***********************************************************
0 0 0x0015B2 0x0000000018719204 boot time event
…
RX2660BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 4 of 11
6. When the EFI Boot Manager Menu appears, press the Down arrow key to move the cursor to Boot
Configuration, and then press <Enter>. This must be done quickly as there is about fifteen seconds to
respond.
NOTE: If more than one bootable disk is inserted, then multiple entries will appear instead of the one (two-line)
entry seen in this example. The first entry will be for the bootable disk in the lowest-numbered slot.
RX2660BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 5 of 11
7. In the dialog box, navigate to Add Boot Entry and press <Enter>. A message will display while the
machine searches for a bootable device (this should take less than thirty seconds).
8. Navigate to the proper device (typically the top entry) and press <Enter>.
RX2660BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 6 of 11
9. There is no option on this step, you must select EFI. Press <Enter> again and wait for the screen to
refresh.
10. Navigate to the VMS line and press <Enter>.
RX2660BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 7 of 11
11. Navigate to the line that reads VMS_LOADER.EFI and press <Enter>.
NOTE: It may be necessary to move the cursor past the end of the page.
12. Enter a description for the hard drive (e.g., PDQVSA).
RX2660BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 8 of 11
13. At the next prompt, leave the Load Option blank and press <Enter>. Type <y> at the Save changes to
NVRAM? prompt.
14. When the screen refreshes, navigate to Edit OS Boot Order and press <Enter>.
RX2660BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 9 of 11
15. Highlight PDQVSA and press <Enter>, the word will turn yellow. Press the Up arrow until PDQVSA is the
topmost entry. Press <Enter> again to lock it into its new position.
16. Press <Enter> and the color will change back.
17. Press <Esc> twice to return to the Boot Menu. The new drive will now display at the top of the list.
RX2660BOOT DISK ENTRY
All information contained in this document is the sole property of HSQ Technology. Any reproduction in part or whole without the written
permission of HSQ Technology is prohibited.
PAGE: 10 of 11
18. Press <Enter>, this will begin rebooting the machine.
19. After the machine has rebooted, press <Ctrl-b> to return to the Main Menu.
Other manuals for Integrity rx2660
6
Table of contents
Other HP Server manuals
HP
HP ProLiant DL140 User manual
HP
HP LC2000r - NetServer - 128 MB RAM User manual
HP
HP ProLiant DL145 Manual
HP
HP EX475 - MediaSmart Server - 512 MB RAM User manual
HP
HP Tc2100 - Server - 128 MB RAM Technical manual
HP
HP ProLiant DL165 User instructions
HP
HP t5740 - Thin Client User instructions
HP
HP ProLiant SL160z - G6 Server User manual
HP
HP t5325 - Thin Client User manual
HP
HP 3000/9x9KS Series User manual
HP
HP T5135 - Compaq Thin Client User manual
HP
HP StorageWorks SB40c User manual
HP
HP ProLiant DL580 G7 User manual
HP
HP Tc2110 - Server - 128 MB RAM Technical manual
HP
HP ProLiant DL320 Generation 5 User manual
HP
HP Blade bc1000 Manual
HP
HP Integrity rx2600 Technical manual
HP
HP ProLiant DL785 Generation 6 (G6) User instructions
HP
HP DL320 - ProLiant - G3 User manual
HP
HP HPE XL270d Installation instructions
