Honeywell SD500-PSDA User manual

I56-3632-003/151177 ECN: 2017-4407

I56-3632-003

SD500-PS and SD500-PSDA

Addressable Fire Pull Station

Installation Instructions

The SD500-PS is an single action addressable

fire pull station and the SD500-PSDA is a dual

action addressable fire pull station. The SD500-

PS and SD500-PSDA are a normally open

initiating point that is compatible with

Honeywell Silent Knight and Farenhyt Series

addressable fire alarm control panels (FACP).

The SD500-PS/PSDA are designed for indoor

use in non-explosive environments. Used to

activate a non-coded alarm instantly.

An on-board status LED is visible from the front

of the pull station. The LED flashes to indicate

proper communication with the FACP

(approximately every 30 seconds).

Specifications

Operation

To activate the fire pull station:

1. Grab the top of the pull station where it is

labeled “PULL”.

2. Pull the cover plate out and down.

To reset the pull station:

1. Insert key into the lock.

2. Turn the key clockwise.

3. Close the cover plate.

4. Turn the key counter clockwise.

Wiring to the SD500-PS/PSDA

Wire the SD500-PS as shown in Figure 1.

Figure 1: Fire Pull Station Wiring

Mounting the SD500-PS/PSDA

The pull station mounts to a standard single gang

electrical switch box or a surface mount back

box P/N PS-SMBB (sold separately). See Figure

Parameter Rating

Max. Line resistance 50

Max. Alarm

Current One device in

alarm 23mA. 46

mA for two

devices in alarm.

.5 mA for each

additional device in

alarm.

Max. Voltage 33 V

Operating Temperature 0° to 49° C

(32° to 120° F)

Dimensions 5-1/8” H x 3-1/16” W x 1.5” D

Parameter Rating

Supervised

Power Limited

I56-3632-003 / 151177

ECN: 2017-4407

Silent Knight®, Farenhyt®, and Honeywell®are registered trademarks of Honeywell International, Inc.

Figure 2: Mounting the Fire Pull Station

Installing The SD500-LK

The SD500-LK is used to convert the SD500-PS

(single action pull station) to a SD500-PSDA

(Dual action pull station. Refer to Figure 3 to

install the SD500-LK Dual Action Conversion

Kit.

Figure 3: SD500-LK Installation

PS-SMBB

Mounting

Holes

Single Gang

Electrical

Switch Box

To meet ADA requirements the

access and no more than 54" from

pull station must be mounted 48"

from the floor for wheelchair forward

the floor for wheelchair side access

This manual suits for next models

Table of contents

Other Honeywell Security System manuals

Honeywell

Honeywell SI800M User manual

Honeywell

Honeywell Ademco Vista-48LA Operating instructions

Honeywell

Honeywell Accenta Quick start guide

Honeywell

Honeywell ADEMCO VISTA-12A Assembly instructions

Honeywell

Honeywell VISTA-128BPT Installation guide

Honeywell

Honeywell L5200 Series User manual

Honeywell

Honeywell proX1 User manual

Honeywell

Honeywell LYNX Touch L5210 Series Assembly instructions

Honeywell

Honeywell Galaxy 2-44 User manual

Honeywell

Honeywell Wireless Alarm Bar User manual

Honeywell

Honeywell ADEMCO 745VSD3 Assembly instructions

Honeywell

Honeywell VISTA-128FBPT User manual

Honeywell

Honeywell Domonial User manual

Honeywell

Honeywell Code Encryptor II User manual

Honeywell

Honeywell LYNX Touch L5210 Series User manual

Honeywell

Honeywell DIY Smart Home User manual

Honeywell

Honeywell Lynx Plus Series User manual

Honeywell

Honeywell VISTA-128BPT Assembly instructions

Honeywell

Honeywell Ademco 8132-i User manual

Honeywell

Honeywell FA-300 Alarm Bar User manual

Honeywell

Honeywell Activ8 COLOUR User manual

Honeywell

Honeywell LYNX Touch Security System User manual

Honeywell

Honeywell Ademco VISTA-20P Operating instructions

Honeywell

Honeywell Domonial User manual

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual