HIK VISION DS-2CD3T86G2-4IS User manual

Bullet Network Camera

Quick Start Guide

rights reserved.

About this Manual

The Manual includes instructions for using and managing the

Product. Pictures, charts, images and all other information

hereinafter are for description and explanation only. The information

contained in the Manual is subject to change, without notice, due to

rmware updates or other reasons. Please nd the latest version of

this Manual at the Hikvision website (http://www.hikvision.com/).

Please use this Manual with the guidance and assistance of

professionals trained in supporting the Product.

Trademarks Acknowledgment

and other Hikvision’s trademarks and logos are

the properties of Hikvision in various jurisdictions.

Other trademarks and logos mentioned are the properties of their

respective owners.

LEGAL DISCLAIMER

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,

THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS

HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED

“AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION

MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY

QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE

USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN

NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY

SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR

LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,

OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS

OF DOCUMENTATION, WHETHER BASED ON BREACH OF

CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT

LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE

OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES OR LOSS.

YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET

PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION

SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL

OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES

RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS

INSPECTION, OR OTHER INTERNET SECURITY RISKS;

HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL

SUPPORT IF REQUIRED.

YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH

ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE

FOR ENSURING THAT YOUR USE CONFORMS TO THE

APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE,

FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT

INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING

WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL

PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER

PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR

ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT

OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION,

THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR

BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT

RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE

NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS

ABUSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL

AND THE APPLICABLE LAW, THE LATER PREVAILS.

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly ap-

proved by the party responsible for compliance could void the user’s

authority to operate the equipment.

FCC compliance: This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equip-

ment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help

FCC conditions

This device complies with part 15 of the FCC Rules. Operation is sub-

ject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied accessories

too are marked with "CE" and comply therefore withthe

applicable harmonized European standards listed under

the the EMC Directive 2014/30/EU, the RoHS Directive

2011/65/EU.

2012/19/EU (WEEE directive): Products marked with

this symbol cannot be disposed of as unsorted municipal

waste in the European Union. For proper recycling, return

this product to your local supplier upon the purchase of

equivalent new equipment, or dispose of it at designated

collection points. For more information see: www.

recyclethis.info

2006/66/EC and its amendment 2013/56/EU (battery

directive): This product contains a battery that cannot be

disposed of as unsorted municipal waste in the European

Union. See the product documentation for specic battery

information. The battery is marked with this symbol, which

may include lettering to indicate cadmium (Cd), lead (Pb),

or mercury (Hg). For proper recycling, return the battery to

your supplier or to a designated collection point. For more

information see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards require-

ments.

Cautions&Warnings

These instructions are intended to ensure that the user can

use the product correctly to avoid danger or property loss.

Laws and Regulations

The device should be used in compliance with local laws,

electrical safety regulations, and re prevention regulations.

Transportation

Keep the device in original or similar packaging while

transporting it.

Power Supply

The power source should meet limited power source or PS2

requirements according to IEC 60950-1 or IEC 62368-1

standard.

DO NOT connect multiple devices to one power adapter, to

avoid over-heating or re hazards caused by overload.

Make sure the plug is properly connected to the power socket.

System Security

The installer and user are responsible for password and security

conguration.

Battery

This equipment is not suitable for use in locations where

children are likely to be present.

CAUTION: Risk of explosion if the battery is replaced by an

incorrect type. Dispose of used batteries according to the

instructions

ATTENTION: IL Y A RISQUE D'EXPLOSION SI LA

BATTERIE EST REMPLACÉE PAR UNE BATTERIE DE

TYPE INCORRECT. METTRE AU REBUT LES BATTERIES

USAGÉES CONFORMÉMENT AUX INSTRUCTIONS

Improper replacement of the battery with an incorrect type may

defeat a safeguard (for example, in the case of some lithium

battery types).

Do not dispose of the battery into fire or a hot oven, or

mechanically crush or cut the battery, which may result in an

explosion.

Do not leave the battery in an extremely high temperature

surrounding environment, which may result in an explosion or

the leakage of ammable liquid or gas.

Do not subject the battery to extremely low air pressure, which

may result in an explosion or the leakage of ammable liquid or

gas.

Maintenance

If the product does not work properly, please contact your

dealer or the nearest service center. We shall not assume any

responsibility for problems caused by unauthorized repair or

maintenance.

A few device components (e.g., electrolytic capacitor) require

regular replacement. The average lifespan varies, so periodic

checking is recommended. Contact your dealer for details.

Cleaning

Please use a soft and dry cloth when clean inside and outside

surfaces of the product cover. Do not use alkaline detergents.

Using Environment

When any laser equipment is in use, make sure that the device

lens is not exposed to the laser beam, or it may burn out.

DO NOT expose the device to high electromagnetic radiation or

dusty environments.

For indoor-only device, place it in a dry and well-ventilated

environment.

DO NOT aim the lens at the sun or any other bright light.

Make sure the running environment meets the requirement of

the device. The operating temperature shall be -30 °C to 60 °C

(-22 °F to 140 °F), and the operating humidity shall be 95% or

less (no condensing).

DO NOT place the device in extremely hot, cold, dusty or damp

locations, and do not expose it to high electromagnetic radiation.

White Light Illuminator (If supported)

Possibly hazardous optical radiation emitted from this product.

DO NOT stare at operating light source. May be harmful to the

eyes.

Wear appropriate eye protection or DO NOT turn on the white

light when you assemble, install or maintain the camera.

Emergency

If smoke, odor, or noise arises from the device, immediately turn

off the power, unplug the power cable, and contact the service

center.

Time Synchronization

Set up device time manually for the first time access if the

local time is not synchronized with that of the network. Visit the

device via Web browse/client software and go to time settings

interface.

Installation

This camera series shares a similar structure. We take one type

among this series for demonstration.

You need to prepare waterproof tapes before installation.

Make sure the device is firmly secured to any wall or ceiling

mountings.

Be sure that there is enough space to install the device and

accessories.

Make sure that the device in the package is in good condition

and all the assembly parts are included.

Make sure that the wall is strong enough to withstand at least 4

times the weight of the device and the mount.

Make sure that the power has been disconnected before you

wire, install, or disassemble the device.

Make sure that no reective surface is too close to the device

lens. The IR light from the device may reect back into the lens

causing reection.

CAUTION: Hot parts! Burned ngers when

handling the parts. Wait one-half hour after

switching off before handling parts. This sticker is

to indicate that the marked item can be hot and should not be

touched without taking care. For device with this sticker, this

device is intended for installation in a restricted access location,

access can only be gained by service persons or by users who

have been instructed about the reasons for the restrictions

applied to the location and about any precautions that shall be

taken.

Symbols and Marks

Notice

Warning

Forbidden

Correct

Incorrect

Turn to page A and continue.

i. Not necessarily included accessory.

ii. Variable accessory amount.

iii. Skip this step if not required.

MicroSD card

Grounding

Functional grounding

Disposal

Purchase separately

Other situations

Other situations omitted

Waterproof

Skip this step if not necessary

Installation

This manual suits for next models

Table of contents

Other HIK VISION Security Camera manuals

HIK VISION

HIK VISION DS-2CE56D0T-ITME User manual

HIK VISION

HIK VISION PanoVu Series User manual

HIK VISION

HIK VISION DS-2DE5425IWG-4G User manual

HIK VISION

HIK VISION DS-2CE56D5T-IR3Z User manual

HIK VISION

HIK VISION DS-2CE16F7T-IT3 User manual

HIK VISION

HIK VISION DS-2TD2166 User manual

HIK VISION

HIK VISION DS-2CD6D54G1-ZS User manual

HIK VISION

HIK VISION DS-2CD852MF-E Series User manual

HIK VISION

HIK VISION H8T Series User manual

HIK VISION

HIK VISION DS-2CE59U7T-VPIT3ZF User manual

HIK VISION

HIK VISION DS-2CE56D1T-IR3Z User manual

HIK VISION

HIK VISION P07Z35LW4T30 User manual

HIK VISION

HIK VISION NK44W1H-1T User manual

HIK VISION

HIK VISION DS-2CD5165G0-IZS User manual

HIK VISION

HIK VISION DS-2TD2667T-15/P User manual

HIK VISION

HIK VISION iDS-2CD7 G0 Series User manual

HIK VISION

HIK VISION DS-2CC12D8T-AMM User manual

HIK VISION

HIK VISION DS-2CD762MF-FBH Series User manual

HIK VISION

HIK VISION DS-2TD4137-25/W User manual

HIK VISION

HIK VISION DS-2CE16H1T-IT3Z User manual

HIK VISION

HIK VISION TURBO HD DS-2CE56D5T-VFIR User manual

HIK VISION

HIK VISION TURBO HD Series User manual

HIK VISION

HIK VISION DS-2CE16D8T-IT1 User manual

HIK VISION

HIK VISION XE61 Series User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications