Heat Controller RADS-101M User manual

Heat Controller • 1900 Wellworth Ave. • Jackson, MI 49203 • (517)787-2100 • www.heatcontroller.com

OWNER’S MANUAL

Room Air Conditioner with R-410A:

RADS-101M

RADS-121M

RADS-123M

Owner’s Manual Room Air Conditioner with R-410A Heat Controller

Heat Controller Room Air Conditioner with R-410A Owner’s Manual

IMPORTANT SAFETY INSTRUCTIONS

Inside you will find many helpful hints on how to use and maintain your air conditioner

properly. Just a little preventive care on your part can save you a great deal of time

and money over the life of your air conditioner. You'll find many answers to common

problems in the chart of troubleshooting tips. If you review our chart of Troubleshooting

Tips first, you may not need to call for service at all.

To prevent injury to the user or other people and property damage, the following

instructions must be followed. Incorrect operation due to ignoring of instructions may

cause harm or damage. The seriousness is classified by the following indications.

This symbol indicates the possibility of death or serious injury.

Always do this.

Never do this.

CAUTION

This symbol indicates the possibility of injury or damage to property.

WARNING

Plug in power plug

properly.

Do not modify power cord length or share the

outlet with other appliances.

Always ensure effective

grounding.

Unplug the unit if strange

sounds, smell, or smoke

comes from it.

Keep firearms away.

Ventilate room before operating air conditioner if there is

a gas leakage from another appliance.

Otherwise, it may cause electric

shock or fire due to excess heat

generation.

It may cause electric shock or fire due to heat generation.

Incorrect grounding may cause

electric shock.

It may cause fire and electric

shock.

It may cause fire.

It may cause explosion, fire and, burns.

It may cause electric shock or fire

due to heat generation.

It may cause electric shock.

It may cause failure of machine

or electric shock.

It may cause fire and electric

shock.

It may cause fire and electric

shock.

It may cause electric shock or fire.

If the power cord is damaged, it must be replaced by the

manufacturer or an authorised service centre or a similarly

qualified per son in order to avoid a hazard.

This could damage your health.

Incorrect installation may cause

fire and electric shock.

It may cause electric shock.

It may cause an explosion or fire.

It may cause failure and electric shock.

Do not operate or stop the

unit by inserting or pulling

out the power plug.

Do not operate with wet

hands or in damp

environment.

Do not allow water to run

into electric parts.

Do not use the socket if it is

loose or damaged.

Do not use the power cord

close to heating appliances.

Do not damage or use an unspecified power

cord.

Do not direct airflow at room occupants only.Always install circuit

breaker and a dedicated

power circuit.

Do not open the unit during operation.

Do not use the power cord near flammable gas

or combustibles, such as gasoline, benzene,

thinner, etc.

Do not disassemble or modify unit.

READ THIS MANUAL

Owner’s Manual Room Air Conditioner with R-410A Heat Controller

When the air filter is to be

removed, do not touch the metal

parts of the unit.

It may cause an injury.

Do not clean unit when power is on

as it may c ause fi re an d el ectric sh ock,

it may cause an injury.

Operation with windows opened

may cause wetting of indoor and

soaking of household furniture.

When the unit is to be cleaned,

switch off, and turn off the circuit

breaker.

Use caution when unpacking and

installing. Sharp edges could cause injury.

Do not clean the air conditioner

with water.

Water may enter the unit and

degrade the insulation. It may

cause an electric shock.

This could injure the pet or plant.

It may cause electric shock and

damage.

Do not put a pet or house plant

where it will be exposed to direct

air flow.

Ventilate the room well when

used together with a stove, etc.

An oxygen shortage may occur.

Do not use this air conditioner to

preserve precision devices, food,

pets, plants, and art objects.It may

cause deterioration of quality, etc.

It may cause failure of product or

fire.

Do not use for special purposes.

If water enters the unit, turn the unit off at the power

outlet and switch off the circuit breaker. Isolate

supply by taking the power-plug out and contact a

qualified service technician.

It may cause failure of appliance

or accident.

Appearance may be deteriorated

due to change of product color or

scratching of its surface.

If bracket is damaged, there is

concern of damage due to falling

of unit.

There is danger of fire or electric

shock.

Operation without filters may cause

failure.

It contains contaminants and

could make you sick.

Stop operation and close the

window in storm or hurricane.

Do not use strong detergent

such as wax or thinner but use

a soft cloth.

Ensure that the installation bracket of the

outdoor appliance is not damaged due

to prolonged exposure.

Hold the plug by the head of the

power plug when taking it out.

Turn off the main power

switch when not using the

unit for a long time.

Always insert the filters securely.

Clean filter once every t wo w eeks.

Do not place heavy object on the power

cord and ensure that the cord is not

compressed.

Do not drink water drained

from air conditioner.

This appliance is not intended for use by persons

(including children) with reduced physical ,sensory

or mental capabilities or lack of experience and

knowledge, unless t hey h aveb eengi vensu pervision

or instruction concerning use of the appliance by

a person responsible for their safety.

Children should be supervised to ensure that they

do not play with the appliance.

If the supply cord is damaged, it must be replaced

by the manufacturer, its service agent or similarly

qualified persons in order to avoid a hazard.

CAUTION

Do not place obstacles around

air-inlets or inside of air-outlet.

The appliance shall be installed in accordance

with national wiring regulations.

Do not operate your air conditioner in a wet room

such as a bathroom or laundry room.

The appliance with electric heater shall have at

l east 1 m eter s pace to th eco mbustible materials.

Contact the authorised service technician for

repair or maintenance of this unit.

Contact the authorized installer for installation

of this unit.

IMPORTANT SAFETY INSTRUCTIONS

Heat Controller Room Air Conditioner with R-410A Owner’s Manual

Do not, under any

circumstances, cut,

remove, or bypass

the grounding prong.

Power supply cord

with 3-prong grounding plug

and current detection device

Grounding type wall

receptacle

WARNING

NOTE:

The power supply cord with this air

conditioner contains a current detection

device designed to reduce the risk of fire.

Please refer to the section Operation

of Current Device for details.In the event

that the power supply cord is damaged,

it cannot be repaired-it must be replaced

with ac ordf romt heP roductM anufacturer.

Avoid fire hazard or electric shock. Do not

use an extension cord or an adaptor plug.

Do not remove any prong from the power

cord.

WARNING

For Your Safety

WARNING

Prevent Accidents

WARNING

Electrical Information

Do not store or use gasoline or other flammable vapors and liquids in the vicinity

of this or any other appliance.

Operation of Current Device

(Applicable to the unit adopts current detection

device only )

The power supply cord contains a current device that senses

damage to the power cord. To test your power supply cord do

the following:

1. Plug in the Air Conditioner.

2. The power supply cord will have TWO buttons on the plug

head. Press the TEST button, you will notice a click as the

RESET button pops out.

3. Press the RESET button, again you will notice a click as

the button engages.

4. The power supply cord is now supplying electricity to the

unit. (On some products this it also indicated by a light on

the plug head.)

To reduce the risk of fire, electrical shock, or injury to persons when using your

air conditioner, follow basic precautions, including the following:

Be sure the electrical service is adequate for the model you have chosen. This

information can be found on the serial plate, which is located on the side of the

the cabinet and behind the grille.

If the air conditioneri s t o b e in stalled in a w indow, yo u w ill pr obably w ant to cl ean

both sides of the g lass f irst.I f th e w indowis a tri ple-track ty pe w ith a sc reen pa nel

included, remove the screen completely before installation.

Be sure the air c onditionerh as b een s ecurely a nd c orrectly in stalled a ccording to

the installation instructions in this manual. Save this manual for possible future

use in removing or installing this unit.

When handling the air conditioner, be careful to avoid cuts f rom s harp m etal f ins

on front and rear coils.

The complete electical rating of your new room air conditioner is stated on the

serial plate. Refer to the rating when checking the electrical requirements.

Be sure the air conditioner is properly grounded. To minimize shock and fire

hazards, proper grounding is important. The power cord is equipped with a

three-prong grounding plug for protection against shock hazards.

Your air conditioner must be used in a properly grounded wall receptacle. If the

wall receptacle you intend to use is not adequately grounded or protected by a

time delay fuse or circuit breaker, have a qualified electrician install the proper

receptacle. Ensure the receptacle is accessible after the unit installation.

Do not run air conditioner without side protective cover in place.This could

result in mechanical damage within the air conditioner.

Do not use an extension cord or an adapter plug.

IMPORTANT SAFETY INSTRUCTIONS

Do not use this device to turn the unit on or off.

Always make sure the RESET button is pushed in for

correct operation.

The power supply must be replaced if it fails reset when

either the TEST button is pushed, or it cannot be reset. A

new one can be obtained from the product manufacturer.

If power supply cord is damaged, it cannot be repaired. It

MUST be replaced by one obtained from the product

manufacturer.

NOTE:

NOTE:This air conditioner is designed to be operated

under condition as follows:

Cooling

operation

Outdoor temp:

Indoor temp:

Heating

operation

Outdoor temp: O

23-76 F/-5-24 C

Indoor temp: O

32-80 F/0-27 C

OO OO

64-109 F/18-43 C (64-125 F/18-52 C

for special tropical models)

62-90 F/17-32 C

Note: Performance may be reduced outside of these

operating temperatures.

Owner’s Manual Room Air Conditioner with R-410A Heat Controller

INSTALLATION INSTRUCTIONS

Read these instructions completely

and carefully.

IMPORTANT- Save these

instructions for local inspector s use.

IMPORTANT- Observe all

governing codes and ordianaces.

Note to Consumer- Keep these

instructions for futrue reference.

Note to Installer- Be sure to leave these

instructions with the Consumer.

Completion time- Approximately 1 hour.

Skill level- Installatio of this appliance

requires basic mechanical skills.

We recommend that two people install

this product.

Proper installation is the responsibility

of the installer.

Product failure due to improper installation

is not covered under the Warranty.

You MUST use all supplied parts and use

proper installation procedures as described

in these instructions when installing this air

conditioner.

BEFORE YOU BEGIN

Do not, under any circumstances, cut or

remove the third (ground) prong from the

power cord.

CAUTION

Do not change the plug on the power cord

of the air conditioner.

Aluminum house wiring may present special

problems- consult a qualified electircian.

When handling unit, be careful to avoid cuts from

sharp metal edges and aluminum fins on front and

rear coils.

TOOLS YOU WILL NEED

Screwdriver

Level

TOOLS YOU MAY USE

Screwdriver

Pencil

Ruler or tape measure

Scissors or knife

Save Carton and these Installation Instructions

for future reference. The carton is the best way

to store unit during winter, or when not in use.

NOTE:

Your air conditioner is designed to install in

standard double hung windows with opening

widths of 23 to 36 inches(584mm to 914mm) .

WINDOW REQUIREMENTS

Model

5000~8000Btu/h 10000~12000Btu/h

14 (356mm) 15-1/2 (394mm)

Table 1

Heat Controller Room Air Conditioner with R-410A Owner’s Manual

Fig.C

NOTE: The top rail hardware and the Fig.A,

Fig.B and Fig.C are not applicable to the units

more than 10000Btu/h.Before installing unit,

the top rail must be assembled on the unit (For

<10000Btu/h models only).

INSTALLATION INSTRUCTIONS

Lower sash must open sufficiently to allow a clear

vertical opening (H) of following size (see Table 1).

Side louvers and the rear of the AC must have clear

air space to allow enough airflow through the

condenser,for heat removal. The rear of the unit must

be outdoors, not inside a building or garage.

PREPARE THE WINDOW

3/4 (or 1/ )

Screws

(7)

2 Lock Frame

(2)

Sash Lock

(1)

Mounting Hardware

Window sash

seal foam

(1)

PREPARE AIR CONDITIONER

A: Remove the air conditioner from the carton and

place on a flat surface.

B: Remove top rail from the packaging material as

shown in Fig. A.

Top Rail Hardware

3/8 Screws

(4)

Top Rail

(1)

Packaging

Fig.A

Top Rail

C: Align the hole in the top rail with those in the top

of the unit as shown in Fig.B

D: Secure the top rail to the unit with the 3/8 Screws

as shown in Fig.C.

NOTE: For safety reasons, all four(4) screws MUST

be securely fastened.

INSTALL THE ACCORDION PANELS

NOTE: Top rail and Sliding Panels at each side are

offset to provide the proper pitch to the rear of (5/16 ).

This is

necessary for proper condensed water

utilization and drainage. If you are not using the Side

Panels for any reason, this pitch to the rear must be

maintained.

A.Place unit on floor, a bench or

a table. Hold the Accordion

Panel in one hand and gently

pull back the center to free the

open end. See Fig.1

Fig.1

Fig.B

Owner’s Manual Room Air Conditioner with R-410A Heat Controller

INSTALLATION INSTRUCTIONS

SECURE THE ACCORDION PANELS

B. Slide the free end " " section of the panel directly

into the cabinet as shown in Fig. 2. Slide the panel

down. Be sure to leave enough space to slip the

top and bottom of the frame into the rails on the

cabinet.

Fig.2

" "section

C. Once the panel has been installed on the side of

the cabinet, make sure it sits securely inside the

frame channel by making slight adjustments.

Slide the top and bottom ends of the frame into the

top and bottom rails of the cabinet. Fig.3.

D. Slide the panel all the way in and repeat on the

other side.

Top Rail

Bottom Rail

Fig.3

A.Keep a firm grip on the air conditioner, carefully

place the unit into the window opening so the bottom

of the air conditioner frame is against the window

sill (Fig.5). Carefully close the window behind the top

rail of the unit.

Fig.5

NOTE: Check that air conditioner is tilted back about

H (Fig.5) (tilted about 3 t o 4 downward t o th e o utside).

After proper installation, condensate should not drain

from the overflow drainh ole d uringn ormalu se,c orrect

the slope otherwise.

B.Extend the side panels out against the window

frame (Fig.6).

window

frame

Fig.6

INSTALL SUPPORT BRACKET

A.Place the frame lock between the frame

extensions and the window sill as shown(Fig.7).

Drive 3 / 4 (19mm)or 1 locking screws

through the frame lock and into the sill .

NOTE: To prevent window sill from splitting,drill

1 / 8" (3mm) pilot holes before driving screws.

/ 2 "(12.7mm)

Fig.7

NOTE: If storm window blocks AC, see Fig. 11.

Top Rail

Bottom Rail

Top left

Top right

Fig.4

Wooden Windows

INSIDE

OUTSIDE

H:About 3/4 to 1 for 5 to 8K);

Measure from the cabinet edge

H:About 1 to 1 / for 10 to12K);

Heat Controller Room Air Conditioner with R-410A Owner’s Manual

INSTALLATION INSTRUCTIONS

B.Drive 1/2" (12.7mm) locking

screws through frame holes into window sash (Fig.8).

3/4" (19mm) or

Fig.8

C.To secure lower sash in place, attach right angle

sash lock with 3/4" (19mm) or 1 screw as

shown(Fig.9).

/2" (12.7mm)

Fig.9

D.Cut and insert it in the

space between the upper and lower sashes (Fig.10).

Window sash seal foam

Fig.10

FOAM SEAL

If AC is Blocked by Storm Window

Add wood as shown in Fig.11, or remove storm

window before air conditioner is installed.

If Storm Window Frame must remain, be sure the

drain holes or slots are not caulked or painted shut.

Accumulated Rain Water or Condensation must be

allowed to drain out.

Removing AC From Window

Turn AC off, and disconnect power cord.

Remove sash seal from between windows, and

unscrew safety sash lock.

Remove screws installed through frame and frame-

lock.

Close (slide) side panels into frame.

Keeping a firm grip on air conditioner, raise sash

and carefully remove.

Be carefully not to spill any remaining water while

lifting unit from window. Store parts WITH air

conditioner.

Board

thickness

as required,

for proper

pitch to rear,

along entire

sill. Fasten

with nails or

screws.

Fig.11

Storm window

frame or other

obstruction.

SASH

1-1/2"min

(38 mm)

Owner’s Manual Room Air Conditioner with R-410A Heat Controller

NORMAL SOUNDS

All the illustrations in this manual are for explanation purpose only. Your air

conditioner may be slightly different. The actual shape shall prevail.

NOTE:

AIR CONDITIONER FEATURES

Before you begin, thoroughly familiarize yourself with the control panel as shown below and all its

functions, then follow the symbol for the functions you desire. The unit can be controlled by the unit

control alone or with the remote.

ELECTRONIC CONTROL OPERATING INSTRUCTIONS

TO TURN UNIT ON OR OFF:

Press ON/OFF button tot urn u nito n o r o ff.

NOTE:The uni t wi l l ini tia te a utomatically the Energy

Saver function under C ool, Dry, Auto(only Au to-Cooling

and Auto-Fan) modes.

TO CHANGE TEMPERATURE SETTING:

Press / UP/DOWN button to change

temperature setting.

NOTE:Press or hold either UP( ) or DOWN ( ) button

until the desired temperature is seen on the display.

This temperature will be automatically maintained

OO OO

anywhere between 62 F(17 C) and 86 F(30 C). If

you want the display to read the actual room

temperature, see To Operate on Fan Only section.

CLEAN AIR FEATURE: (on some models)

Press Clean Air button,the ion generator is

energized and will help to removep ollen an dimp urities

from the air, and trap them in the filter.

Sound of Rushing Air

At the front of the unit, you may

hear the sound of rushing air

being moved by the fan

High Pitched Chatter

High efficiency compressors

may have a high pitched chatter

during the cooling cycle.

Gurgle/Hiss

Gurgling or hissing noise may

be heard due to refrigerant

passing through evaporator

during normal operation.

Pinging or Swishing

Droplets of water hitting condenser

during normal operation may cause

pinging or swishing sounds.

Vibration

Unit may vibrate and make noise

because of poor wall or window

construction or incorrect installation.

DISPLAYS

TEMPERATURE

OR TIME OR ERROR CODES

UNIT CONTROL

Sleep

Timer

Auto

Cool

Dry

Fan

Low

Auto

Med

High

Fan Speed

Mode

Energy

Saver On/Off

Temp/Timer Temp/Timer

Off

Check

Filter

TURNS UNIT

ON OR OFF

SET FAN SPEED

SLEEP MODE

ADJUSTS

TEMPERATURE

OR TIME

ADJUSTS

TEMPERATURE

OR TIME

ACTIVATES

TIMER

CHECK FILTER

RESET BUTTON

SETS MODE

ENERGY

SAVER MODE

Clean

Air

CLEAN AIR MODE

(on some models)

FOLLOW ME INDICATOR

(on some models)

REMOTE SIGNAL

RECEPTOR

This manual suits for next models

Table of contents

Other Heat Controller Air Conditioner manuals

Heat Controller

Heat Controller RADS-151L User manual

Heat Controller

Heat Controller COMFORT AIRE RADS-51B Building instructions

Heat Controller

Heat Controller HDG18 User manual

Heat Controller

Heat Controller R-22 User manual

Heat Controller

Heat Controller REG-253H Application guide

Heat Controller

Heat Controller Comfort-Aire BG-81A User manual

Heat Controller

Heat Controller DMC09SB-0 User manual

Heat Controller

Heat Controller BG-81J User manual

Heat Controller

Heat Controller AS-Q1835JZ0 User manual

Heat Controller

Heat Controller PE-121A User manual

Heat Controller

Heat Controller Comfort-Aire RAD-183B User manual

Heat Controller

Heat Controller EKTC07-1G User manual

Heat Controller

Heat Controller Comfort-Aire RAD-61A Building instructions

Heat Controller

Heat Controller PTAC07A130A User manual

Heat Controller

Heat Controller REG-183JREG-253JRADS-151JRADS-183J User manual

Heat Controller

Heat Controller V series User manual

Heat Controller

Heat Controller Energy Knight B/A-HMC18AS User manual

Heat Controller

Heat Controller B-MMC09FA-1 User manual

Heat Controller

Heat Controller GeoLogix HTS Series User manual

Heat Controller

Heat Controller DMC12SB-0 User manual

Heat Controller

Heat Controller RG-51G User manual

Heat Controller

Heat Controller CD-101L User manual

Heat Controller

Heat Controller COMFORT-AIRE BG-81H User manual

Heat Controller

Heat Controller PTAC09A130A User manual

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual