Harbor Breeze C-UT56TBC3M User manual

ITEM/ARTICLE #270817

E251363

UTILITY/CEILING FAN

UTILITY/VENTILATEUR DE PLAFOND

(page 10)

MODEL/MODÈLE #C-UT56TBC3M

WARNINGS

• Read and save these instructions.

• Read this manual carefully and completely before attempting to assemble, install or operate this product.

• Be sure you read and understand the Safety Precautions on page 3 of these instructions.

• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for repairs, it must be

shipped in its original packaging to ensure proper protection against damage that might exceed the initial cause for

return.

• CAUTION: Before proceeding, be sure to shut off electricity at main switch or circuit breaker in order to avoid

electrical shock.

• WARNING: To reduce the risk of fire or electric shock, do not use this fan with variable speed switch.

• WARNING: To reduce the risk of fire, electric shock, or personal injury, do not bend the blade arms when

installing them, balancing the blades, or cleaning the fan. Do not insert foreign objects between the rotating fan

blades. Mount to outlet box marked "ACCEPTABLE FOR FAN SUPPORT" and use mounting screws provided with

the outlet box. Most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan

support and may need to be replaced. Consult a qualified electrician if in doubt.

Questions, problems, missing parts? Before returning to your retailer, call or contact our customer service

department at 1-800-527-1292, 8:30 a.m.-5:00 p.m., CST, Monday-Friday or www.litexfans.com.

Harbor Breeze® is a registered trademark

TABLE OF CONTENTS

Safety Information ........................…………………………………………………………………………...……..….3

Package Contents .............................…………………………………………………………………..……..…..…..4

Preparation .......................................….…………………..……………………….…………….………………....5

Initial Installation .......................................….……………..……………………….……….……...........................5 - 6

Wiring Fan ............................................................……………………........................................………….....6 - 7

Wiring Wall Control ............................................................……………………........................................……....7

Final Installation ............………………….…………….……………………….…………….……........................….8

Fan Operation ............................................................................................…………………………………....….8

Care and Maintenance .......................………………………………………………………………..……………….8

Troubleshooting ...........................................………...………………………….……………..……........................8

Warranty ........................…………………………………….…………………………………………..…................…9

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, install or operate the product. If you

have any questions regarding the product, please call customer service at 1-800-527-1292, 8:30 a.m.-5:00 p.m.,

CST, Monday-Friday.

1. Before you begin installing the fan, disconnect the power by removing fuses or turning off circuit breakers

CAUTION: Read all instructions and safety information before installing your new fan. Review the

accompanying assembly diagrams.

3. Make sure that all electrical connections comply with local codes, ordinances, or the National Electrical Code.

Hire a qualified electrician or consult a Do-It-Yourself wiring handbook if you are unfamiliar with installing

electrical wiring.

4. Make sure the installation site you choose allows a minimum clearance of 10 feet from the blades to the floor

and at least 30 in. from the end of the blades to any obstruction.

5. If you are mounting the fan to a ceiling outlet box, use a METAL octagonal outlet box. Secure the box directly to

the building structure. The outlet box and its support must be able to support the moving weight of the fan (at

least 35 lbs.). Do NOT use a plastic outlet box.

6. After you install the fan, make sure that all connections are secure to prevent the fan from falling.

7. Instructions for supply connections: conductor of a fan identified as grounded conductor to be connected to a

grounded conductor of power supply; conductor of a fan identified for equipment grounding to be connected to

an equipment-grounding conductor.

8. WARNING: To reduce the risk of fire, electrical shock, or personal injury, wire connectors provided with

this fan are designed to accept only one 12 gauge house wire and two lead wires from the fan. If your house

wire is larger than 12 gauge or there is more than one house wire to connect to the two fan lead wires, consult

an electrician for the proper size wire connectors to use.

9. WARNING: To reduce the risk of fire or electric shock, do not use this fan with a variable speed switch.

10. WARNING: To reduce the risk of fire, electric shock, or personal injury, do not bend the blade arms when

installing them or cleaning the fan. Do not insert foreign objects between the rotating fan blades. Mount to outlet

box marked "ACCEPTABLE FOR FAN SUPPORT" and use mounting screws provided with the outlet box. Most

outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan support and may need

to be replaced. Consult a qualified electrician if in doubt.

11. The net weight of this fan is: 11.68 lbs. (5.3 kg).

PACKAGE CONTENTS

Part Description Quantity

A J-hook Mounting Bracket 1

B Wall Control 1

C Motor Assembly 1

D Blade 3

E Motor Screw (in motor) 6

F 5.4M/M Lock Washer (in motor) 6

G E3 Wire Connector (in hardware pack) 5

H Safety Cable (already attached to motor) 1

I Vice (on safety cable) 1

J Flat Washer (in motor) 6

NOTE:

For replacement parts, call our customer service department

at 1-800-527-1292, 8:30 a.m.-5:00 p.m., CST, Monday-Friday.

When ordering parts, please have the Model # or Item # of the

fan available, which can be found on page 1.

INITIAL INSTALLATION (continued on next page)

1. Turn off circuit breakers and wall switch to the fan supply line

leads. [Fig. 1]

Warning: Failure to disconnect power supply prior to

installation may result in serious injury or death.

4. Secure mounting bracket (A) to outlet box using screws, spring

washers, and flat washers (size 8 or M5) provided with the outlet

box. [Fig. 4]

*Note: It is very important that you use the proper hardware when

installing the mounting bracket (A) as this will support the fan.

Please make certain that you purchase any hardware that is

missing in order to install the mounting bracket (A) properly.

3. Check to make sure blades (D) are at least 30 in. from any

obstruction. Also check to ensure that blades (D) are at least 10 ft.

above the floor. [Fig. 3]

5. Loosen canopy set screw and lower canopy to expose hanging

bar. [Fig. 5]

PREPARATION

1. Before beginning assembly and installation of product, make sure all parts are present. Compare parts with

"Package Contents" list and diagrams on the previous page. If any part is missing or damaged, do not attempt to

assemble, install or operate the product. Contact customer service for replacement parts as indicated at the bottom

of page 4.

Estimated Assembly Time: 120 minutes

Tools Required for Assembly (not included):electrical tape, Phillips screwdriver, pliers, safety glasses, stepladder

and wire strippers

Helpful Tools (not included):tape measure, do-it-yourself-guide and wire cutters

2. After opening top of carton, remove mounting hardware package from foam inserts. Remove motor from packing

and place on carpet or on foam to avoid damage to finish.

CAUTION: Carefully check all screws, bolts and nuts on fan motor assembly to ensure that they are secured.

WARNING: When using an existing outlet box, make sure the box is securely attached to the building

structure and can support the full weight of the fan. Failure to do this can result in serious injury or death.

Fig. 1

Fig. 3

Fig. 4

Fig. 5

10 ft.

min.

30 in.

min.

Fig. 2

2. This fan can only be mounted with the downrod in the motor

assembly (C). [Fig. 2]

Note: Angle mount or closemount configurations are not available

for this fan.

Canopy

Downrod

Canopy Set Screw

INITIAL INSTALLATION (continued from previous page)

WIRING FAN (continued on next page)

WARNING: To reduce the risk of fire, electrical shock, or

personal injury, wire connectors provided with this fan are designed

to accept only one 12 gauge house wire and two lead wires from

the fan. If your house wire is larger than 12 gauge or there is more

than one house wire to connect to the two fan lead wires, consult

an electrician for the proper size wire connectors to use.

Important: Be sure wiring box is properly grounded or that a

ground (green or bare) wire is present.

Warning: If house wires are different colors than referred to

in the following steps, stop immediately. A professional electrician

is recommended to determine wiring.

7. Separate electrical wiring and safety cable (H) from rubber band.

Lift fan to mounting bracket (A) and slide rubber bushing over J-hook

on mounting bracket (A). [Fig. 7]

Fig. 6

6. Adjust safety cable (H) length by loosening screw and nut on the

safety cable vice (I) and pulling on the safety cable (H). Adjust slack

in cable to a hands length and tighten vice (I) screw and nut

securely. The loop at the end of the safety cable (H) should just fit

over the threads on the wood screw. [Fig. 6] Test safety cable (H) by

pulling on loose end with pliers. If the safety cable (H) slips, then

vice (I) screw and nut must be set tighter.

screw nut

loop

Fig. 7

Irubber

bushing

"J" Hook

wood screw

& washer

hanging bar

wood joist

black

white

black

green/ground

bare/ground

from fan

white

wall control wire

from

ceiling

Fig. 1

1. Find a secure attachment point (wood ceiling joist highly

recommended) and secure safety cable (H). It will be necessary to

use a heavy duty wood screw, washer and lock washer (not

supplied) with the safety cable loop. [Fig. 1] Extra cable slack can

be left in ceiling area.

Make the following electrical connections: (Make special note of

Step 2 on the following page while wiring.)

Connect WHITE wire from fan to WHITE wire from ceiling. Connect

BLACK wire from fan to BLACK wire from ceiling. Connect GREEN

wire from fan to BARE/GREEN wire from ceiling. Make sure that all

connections are secure using wire connectors (G) provided. [Fig. 1]

outlet box

in wall

black

AC IN

black

TO FAN

WIRING FAN (continued from previous page)

1. Remove existing wall switch and save the screws. Unscrew

screw on top and bottom of the wall control (B) and remove back

plate from wall control (B). Secure back plate to wall or structure

with screws from existing wall switch. [Fig. 1]

Make the following electrical connections: (Make special note of

Step 2 below while wiring.)

Connect BLACK wire from wall control to BLACK (AC TO FAN)

wire from wall. Connect BLACK wire from wall control to BLACK

(AC IN) wire from wall. [Fig. 1]

Fig. 3

3. Screw wire connectors (G) on in a clockwise direction. Wrap

electrical tape around each individual wire connector (G) down to the

wire as shown in Fig. 3.

Warning: Make sure no bare wire or wire strands are visible

after making connections. Place green and white connections on

opposite side of box from the black and blue (if applicable) connections.

Turn spliced/taped wires upward and gently push wires and wire

connectors (G) into outlet box.

back plate

back plate screw

black

AC IN

back plate screw

black

TO FAN

black

AC IN

WIRING WALL CONTROL

Fig. 1

outlet box

Fig. 3

3. Screw wire connectors (G) on in a clockwise direction. Wrap

electrical tape around each individual wire connector (G) down to

the wire as shown in Fig. 3.

Warning: Make sure no bare wire or wire strands are visible

after making connections.

Turn spliced/taped wires in toward wall and gently push wires and

wire connectors (G) into outlet box.

4. Attach wall control (B) to back plate using screws that were

previously removed. [Fig. 4]

Fig. 4

back

plate

screw

back

plate

back

plate

screw

black

TO FAN

2. Strip 3/4 of an inch of insulation from ends of white wire. Twist

stripped ends of each strand of wire within the insulation with pliers.

[Fig. 2] Snip ends after twisting strands together. Repeat for black, blue

(if applicable) and green wires.

Fig. 2

2. Strip 3/4 of an inch of insulation from ends of white wire. Twist

stripped ends of each strand of wire within the insulation with pliers.

[Fig. 2] Snip ends after twisting strands together. Repeat for black, blue

(if applicable) and green wires.

Fig. 2

FINAL INSTALLATION

2. Locate and remove one pair of motor screws (E), lock washers

(F) and flat washers (J) from top of motor but leave black rubber

cushion intact. Lower one of the blades (D) over black rubber

cushion and attach blade (D) with screws (E), lock washers (F) and

flat washers (J) that were just removed. Tighten screws (E)

securely. [Fig. 2] Skip the screw end with the nut in the top of the

motor (see Note below) and then remove the next pair of motor

screws (E), lock washers (F) and flat washers (J) from top of motor

and repeat the rest of Step 2 until all three blades (D) have been

attached.

Note: Do NOT loosen or remove the three nuts on the threaded

ends of the screws on the top side of the motor.

Fig. 2

Motor

FAN OPERATION

Adjust fan speed by turning dial on wall control (B). 0 is OFF setting

and 1 is for LOW speed, 2 for MEDIUM-LOW, 3 for MEDIUM, 4 for

MEDIUM-HIGH and 5 for HIGH.

CARE AND MAINTENANCE

At least twice each year, lower canopy to check mounting bracket (A) and hanging bar, and then tighten all screws

on motor assembly (C). Clean motor assembly (C) with only a soft brush or lint-free cloth to avoid scratching the

finish. Clean blades (D) with a lint-free cloth.

Important: Shut off main power supply before beginning any maintenance. Do not use water or a damp cloth to

clean the ceiling fan.

TROUBLESHOOTING

Problem Possible Cause Corrective Action

Fan does not move. 1. Power is off or fuse is blown. 1. Turn power on or check fuse.

2. Faulty wire connection. 2. Turn power off. Loosen canopy and

check all connections.

Noisy operation. 1. Blades (D) are loose. 1. Tighten all motor screws (E).

2. Bent blade (D). 2. Replace blade (D).

3. Unapproved speed control. 3. Replace with an approved speed

control device.

Excessive wobbling. 1. Blades (D) are loose. 1. Tighten all motor screws (E).

2. Fan not securely mounted. 2. Turn power off. Carefully loosen

canopy and verify that mounting bracket

(A) is secure.

Note: A small amount of "wobble" is normal and should not be considered a defect.

Warning: Before beginning work, shut off the power supply to avoid electrical shock.

1. Lift canopy over mounting bracket (A) and tighten the canopy set

screw to secure the canopy. [Fig. 1]

Fig. 1

Canopy

Set Screw

Printed in China

WARRANTY

LIMITED LIFETIME WARRANTY: Litex Industries warrants this fan to be free from defects in workmanship and

materials present at time of shipment from the factory for Lifetime limited from the date of purchase. This warranty

applies only to the original purchaser. Litex Industries agrees to correct any defect at no charge or, at our option,

replace the ceiling fan with a comparable or superior model.

To obtain warranty service, present a copy of your sales receipt as proof of purchase. All cost of removal and

reinstallation are the express responsibility of the purchaser. Any damage to the ceiling fan by accident, misuse or

improper installation, or by affixing accessories not produced by the manufacturer of this fan, are the purchaser's

own responsibility. Litex Industries assumes no responsibility whatsoever for fan installation during the limited

lifetime warranty. Any service performed by an unauthorized person will render the warranty invalid.

Due to varying climatic conditions, this warranty does not cover changes in brass finish, rusting, pitting, tarnishing,

corroding or peeling. Brass finish fans maintain their beauty when protected from varying weather conditions. Any

glass provided with this fan is not covered by the warranty.

Any replacement of defective parts for the ceiling fan must be reported within the first year from the date of

purchase. For the balance of the warranty, call our customer service department (at 1-800-527-1292) for return

authorization and shipping instructions so that we may repair or replace the ceiling fan. Any fan or parts returned

improperly packaged is/are the sole responsibility of the purchaser. There is no further express warranty. Litex

Industries disclaims any and all implied warranties. The duration of any implied warranty which cannot be

disclaimed is limited to the limited lifetime period as specified in our warranty. Litex Industries shall not be liable for

incidental, consequential or special damages arising at or in connection with product use or performance except as

may otherwise be accorded by law. This warranty gives you specific legal rights and you may also have other rights

which vary from state to state. This warranty supersedes all prior warranties.

This manual suits for next models

Table of contents

Other Harbor Breeze Fan manuals

Harbor Breeze

Harbor Breeze Bath Ventilator with Light User manual

Harbor Breeze

Harbor Breeze MARICOPA LP8013LAZ User manual

Harbor Breeze

Harbor Breeze AFTONSHIRE User manual

Harbor Breeze

Harbor Breeze KITSILANO User manual

Harbor Breeze

Harbor Breeze 0883783 User manual

Harbor Breeze

Harbor Breeze EXOCET 40764 User manual

Harbor Breeze

Harbor Breeze 40094 User manual

Harbor Breeze

Harbor Breeze BRADBURY BRD48BNK6LR User manual

Harbor Breeze

Harbor Breeze LANSING 40198 User manual

Harbor Breeze

Harbor Breeze RC103L User manual

Harbor Breeze

Harbor Breeze 00892 User manual

Harbor Breeze

Harbor Breeze E-CAF56OSB5CRC User manual

Harbor Breeze

Harbor Breeze BELCARRA CE-JP13BNK6RC User manual

Harbor Breeze

Harbor Breeze 40093 User manual

Harbor Breeze

Harbor Breeze KINGSBURY 40190 User manual

Harbor Breeze

Harbor Breeze DUBOIS DM52BCP5CS User manual

Harbor Breeze

Harbor Breeze 873 User manual

Harbor Breeze

Harbor Breeze 872 User manual

Harbor Breeze

Harbor Breeze BTH44ABZC5C User manual

Harbor Breeze

Harbor Breeze Teolo User manual

Harbor Breeze

Harbor Breeze 41107 User manual

Harbor Breeze

Harbor Breeze 42224 User manual

Harbor Breeze

Harbor Breeze LP8072LAZ User manual

Harbor Breeze

Harbor Breeze 00728 User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual