Harbor Breeze 41107 User manual
Harbor Breeze® is a registered trademark
of LF, LLC. All Rights Reserved.
1
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday,
8 a.m. - 5 p.m., EST, Friday.
ATTACH YOUR RECEIPT HERE
Purchase Date _________________________
BM18022
ITEM #0176493, 0179178, 0922357, 0922356
LANSING CEILING FAN
MODEL #40948, 40949, 41108, 41107
Español p. 21
2
TABLE OF CONTENTS
Package Contents .................................................................3
Hardware Contents ................................................................4
Safety Information .................................................................5
Preparation ......................................................................6
Initial Installation ..................................................................7
Standard or Angled Mounting Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Closemount Instructions ...........................................................11
Wiring .........................................................................12
Final Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Operating Instructions .............................................................17
Care and Maintenance ............................................................18
Troubleshooting..................................................................18
Limited Lifetime Warranty ..........................................................19
Replacement Parts List ............................................................20
3
PACKAGE CONTENTS
I
F
E
KMN
PART DESCRIPTION QUANTITY
A Downrod 1
B Downrod Pin (preassembled to Downrod [A]) 1
C Downrod Clip (preassembled to Downrod [A]) 1
D Mounting Bracket (preassembled to Canopy [E]) 1
E Canopy 1
F Canopy Cover (preassembled to Canopy [E]) 1
G Light Kit 1
H Glass Shade 3
IMotor Assembly 1
J Fitter Plate (preassembled to Motor Assembly [I]) 1
K Yoke Cover 1
L Blade Arm 5
M Blade 5
N Bulb 3
O Motor Screw (preassembled to Motor Assembly [I]) 10
P Set Screw (preassembled to Motor Assembly [I]) 2
Q Phillips-head Closemount Screw (preassembled to Motor Assembly [I]) 3
R Mounting Bracket Screw (preassembled to Mounting Bracket [D]) 4
S Fitter Plate Screw (preassembled to Fitter Plate [J]) 3
A
CB
D
E
F
G
H
I
J
K L M N
O
P
Q
R
S
4
HARDWARE CONTENTS
Wire
Connector
Qty. 3
+ 1 extra
Blade Screw
Qty. 15
+ 1 extra
Blade Washer
Qty. 15
+ 1 extra
Pull Chain Extension
Qty. 2
Motor Screw
1 extra
H
a
r
b
o
r
B
r
e
e
z
e
H
a
r
b
o
r
B
r
e
e
z
e
AA BB CC DD
XX
5
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate, or install the product.
• Before you begin installing the fan, disconnect the power by removing fuses or turning off the circuit
breakers.
• Make sure that all electrical connections comply with local codes, ordinances, the National
Electrical Code, and ANSI/NFPA 70-199. Hire a qualied electrician or consult a do-it-yourself
wiring handbook if you are unfamiliar with installing electrical wiring.
• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to
the oor and at least 30 in. from the end of the blades to any obstruction.
• The net weight of this fan is: 14.01 lbs.
DANGER: When using an existing outlet box, make sure the outlet box is securely attached to
the building structure and can support the full weight of the fan. Failure to do this can result in serious
injury or death. The stability of the outlet box is essential in minimizing wobble and noise in the fan
after installation is complete.
WARNING: To avoid personal injury, the use of gloves may be necessary while handling fan
parts with sharp edges.
WARNING: Using a full-range dimmer switch to control fan speed will cause a loud humming
noise from the fan. To reduce the risk of re or electric shock, do NOT use a full-range dimmer switch
to control the fan speed.
WARNING: To reduce the risk of re or electric shock, do NOT use this fan with any solid-state
speed control device.
WARNING: To reduce the risk of re, electric shock, or personal injury, mount the fan to an
outlet box marked “ACCEPTABLE FOR FAN SUPPORT” and use the mounting screws provided with
the outlet box. Most outlet boxes commonly used for the support of lighting xtures are not acceptable
for fan support and may need to be replaced. Consult a qualied electrician if in doubt. Secure the
outlet box directly to the building structure. The outlet box and its support must be able to support the
moving weight of the fan (at least 35 lbs.).
WARNING: To reduce the risk of re, electrical shock, or personal injury, wire connectors
provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from
the fan. If your house wire is larger than 12-gauge or there is more than one house wire to connect to
the two fan lead wires, consult an electrician for the proper size wire connectors to use.
WARNING: To reduce the risk of re, electric shock, or personal injury, do not bend the blade
arms when installing them, balancing the blades, or cleaning the fan. Do not insert objects between
the rotating fan blades.
WARNING: To reduce the risk of personal injury, use only parts provided with this fan. The use
of parts OTHER than those provided with this fan will void the warranty.
6
SAFETY INFORMATION
CAUTION: Read all instructions and safety information before installing your new fan. Review the
accompanying assembly diagrams.
CAUTION: Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present.
CAUTION: Carefully check all screws, bolts and nuts on the fan motor assembly to ensure they are
secured.
PREPARATION
Before beginning the assembly of this product, ensure that all parts are present. Compare all parts
with the package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 90 minutes
Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety
Glasses, Step Ladder and Wire Strippers
Helpful Tools (not included): AC Tester Light, Tape Measure, Wiring Handbook and Wire Cutters
7
INITIAL INSTALLATION
1. Turn off the circuit breakers and the wall switch to the
fan supply line leads.
DANGER: Failure to disconnect the power
supply prior to installation may result in serious injury
or death.
2. Determine the mounting method to use.
Standard Mounting is best suited for ceilings 8 ft.
or higher. For taller ceilings you may want to use a
longer downrod (sold separately).
Angle mounting is best suited for angled or vaulted
ceilings. A longer downrod is sometimes necessary
to ensure proper blade clearance. Important: If using
the angle mount, check to ensure the ceiling angle is
not steeper than 16°.
Flushmount installation is not available for this item.
Closemount installation is more suitable for
ceilingslower than 8 ft. high.
2
Standard Mounting
Flushmount Closemount
Angle Mounting
3. Ensure that the blades (M) will be at least 30 in. from
any obstructions. Also check the downrod (A) length
to ensure the blades (M) will be at least 7 ft. above
the oor.
7 ft. min.
30 in. min.
A
1
3
A
M
8
INITIAL INSTALLATION
4. Loosen all four mounting bracket screws (R), then
completely remove the two mounting bracket screws
(R) from the round holes of canopy (E). Set aside for
later use.
Detach mounting bracket (D) from canopy (E).
E
D
R
5. Attach mounting bracket (D) to outlet box (not
included) using screws and washers provided with the
outlet box.
CAUTION: It is very important you use the proper
hardware when installing the mounting bracket (D) as
it will support the fan.
6. Remove the 10 preassembled motor screws (O) and
ve preassembled motor blocks from the underside of
the motor assembly (I). Discard the motor blocks but
save the motor screws (O) for later.
For Standard or Angle Mounting Instructions,
continue to page 9. For Closemount Instructions,
proceed to page 11.
4
5
6
Motor
Block
Standard and
Closemount
Mounting
Angle
Mounting
D
D
R
E
D
D
O
I
9
STANDARD OR ANGLED MOUNTING INSTRUCTIONS
1. Remove the downrod clip (C) and downrod pin (B) from
the downrod (A). Then partially loosen the set screws
(P) in the yoke at the top of the motor assembly (I).
2. Insert the downrod (A) through the canopy (E)
and yoke cover (K). Feed the wires from the motor
assembly (I) through the downrod (A).
3. Slide the downrod (A) into the yoke of the motor
assembly (I), align the holes, then re-install the
downrod pin (B) and downrod clip (C). Secure with set
screws (P) and slide the yoke cover (K) down until it
rests on top of the motor assembly (I).
1
I
Yoke
A
BC
P
I
E
K
I
A
K
C
BI
2
3
P
A
P
10
STANDARD OR ANGLED MOUNTING INSTRUCTIONS
4. Depending on the length of downrod you use, you may
need to cut the lead wires back to simplify the wiring. If
you decide to cut back the lead wires, it is suggested
that you do so in the following manner: Take the lead
wires and make sure that you have pulled them all the
way through the top of the downrod and measure 8 in.
of lead wire, and then cut the excess wire off with wire
cutters (not included).
5. If you decided to cut back the lead wire in Step 4, strip
1/2 in. of insulation from the end of the white wire. Twist
the stripped ends of each strand of wire within the
insulation with pliers (not included). Repeat this step for
black and blue wires.
Important: If you did not cut back the lead wires in
Step 4, Step 5 is not necessary and you may proceed
to Step 6.
6. Install the ball end of the downrod (A) into the opening
of mounting bracket (D). Align one of the four slots in
the downrod with the tab in the mounting bracket (D).
Note: The downrod (A) should not rotate if installed
correctly.
DANGER: Failure to align the slot in the downrod
(A) with the tab of the mounting bracket (D) could
cause the fan to fall, resulting in serious injury or death.
Proceed to the Wiring on page 12.
4
6
Tab
Slot
5
8 in.
D
A
This manual suits for next models
3
Table of contents
Other Harbor Breeze Fan manuals
Harbor Breeze
Harbor Breeze FWH60BNK3LRS User manual
Harbor Breeze
Harbor Breeze ELEVATION LP8006LBN User manual
Harbor Breeze
Harbor Breeze OCEANSIDE User manual
Harbor Breeze
Harbor Breeze 40093 User manual
Harbor Breeze
Harbor Breeze LP8071LBN User manual
Harbor Breeze
Harbor Breeze HIVE Series User manual
Harbor Breeze
Harbor Breeze MAZON MZ44BNK3LR User manual
Harbor Breeze
Harbor Breeze BTH44ABZC5C User manual
Harbor Breeze
Harbor Breeze TILGHMAN WCK52LMW5N User manual
Harbor Breeze
Harbor Breeze CGR60WW3LR User manual
Harbor Breeze
Harbor Breeze 41239 User manual
Harbor Breeze
Harbor Breeze 41161 User manual
Harbor Breeze
Harbor Breeze KEYPORT HUGGER 40141 User manual
Harbor Breeze
Harbor Breeze 40048 User manual
Harbor Breeze
Harbor Breeze Bath Ventilator with Light User manual
Harbor Breeze
Harbor Breeze CLRO52-II User manual
Harbor Breeze
Harbor Breeze CLASSIC STYLE 00819 User manual
Harbor Breeze
Harbor Breeze EUK60MBK10LR User manual
Harbor Breeze
Harbor Breeze BELLHAVEN II E-BLHII52VPW5C4S User manual
Harbor Breeze
Harbor Breeze CHESHIRE II CSD52FBZ5C4S User manual
Popular Fan manuals by other brands
ELTA FANS
ELTA FANS H03VV-F installation guide
Hunter
Hunter 20714 Owner's guide and installation manual
Emerson
Emerson CARRERA VERANDA CF542ORB00 owner's manual
Hunter
Hunter Caraway Owner's guide and installation manual
Panasonic
Panasonic FV-15NLFS1 Service manual
Kompernass
Kompernass KH 1150 operating instructions
