Harbor Breeze 40093 User manual
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m.,
EST, Friday. p.m., EST, Monday - Friday.
1
ATTACH YOUR RECEIPT HERE
Serial Number _________________________ Purchase Date _________________________
Lowes.com/harborbreeze
Harbor Breeze® is a registered trademark
of LF, LLC. All Rights Reserved.
XXXXX
ITEM #0044687, 0043676, 0044622
CROSSWINDS CEILING FAN
MODEL #40093, 40091, 40092
Español p. 25
2
Lowes.com/harborbreeze
TABLE OF CONTENTS
Package Contents .................................................................3
Hardware Contents ................................................................4
Safety Information .................................................................5
Preparation ......................................................................6
Initial Installation ..................................................................7
Standard or Angle Mounting Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Closemount Instructions ...........................................................12
Wiring .........................................................................13
Final Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Operating Instructions .............................................................19
Care and Maintenance ............................................................21
Troubleshooting..................................................................21
Limited Lifetime Warranty ..........................................................23
Replacement Parts List ............................................................24
3
Lowes.com/harborbreeze
PACKAGE CONTENTS
A
I
OQ
JKL
M
N
G
C
H
DE
F
P
R
B
S
PART DESCRIPTION QUANTITY
A Downrod 1
B Plastic Plug Button (preassembled to Switch Housing Cap (Q)) 1
C Canopy (preassembled to the Mounting Bracket (D)) 1
D Mounting Bracket 1
E Light Kit 1
FMotor Assembly 1
GBlade Arm 5
H Blade 5
I Bowl 1
J Bulb 3
K End Cap (preassembled to Light Kit (E)) 1
L Finial (preassembled to Light Kit (E)) 1
M Canopy Cover (preassembled to Canopy (C)) 1
N Remote Control 1
O 12-Volt Battery 1
P Switch Housing (preassembled to Motor Assembly (F)) 1
Q Switch Housing Cap 1
R Receiver 1
S Yoke Cover 1
4
Lowes.com/harborbreeze
HARDWARE CONTENTS
Motor Screw
Qty. 10
(preassembled to
Motor Assembly
(F)) + 1 extra
Wire
Connector
Qty. 5
+ 1 extra
Pull Chain
Extension
Qty. 2
Downrod Clip
Qty. 1
(preassembled to
Downrod (A))
Downrod Pin
Qty. 1
(preassembled to
Downrod (A))
Motor Housing Set
Screw
Qty. 2
(preassembled to
Motor Assembly (F))
Closemount Screw
Qty. 3
(preassembled to
Motor Assembly (F))
+ 1 extra
Mounting Bracket
Screw
Qty. 4
(preassembled to
Mounting Bracket
(D))
Switch Housing
Screw
Qty. 3
(preassembled to
Switch Housing
Cap (Q))
Rubber Washer
Qty. 1
(preassembled to
Light Kit (E))
Nut
Qty. 2
(preassembled to
Light Kit (E))
AA BB CC DD EE
FF
KK
GG HH II JJ
5
Lowes.com/harborbreeze
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate, or install the
product.
• Before you begin installing the fan, disconnect the power by removing fuses or turning off the circuit
breakers.
• Make sure that all electrical connections comply with local codes, ordinances, the National
ElectricalCode,andANSI/NFPA70-199.Hireaqualiedelectricianorconsultado-it-yourself
wiring handbook if you are unfamiliar with installing electrical wiring.
• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to
theoorandatleast30in.fromtheendofthebladestoanyobstruction.
• The net weight of this fan is: 18.04 lbs.
DANGER: When using an existing outlet box, make sure the outlet box is securely attached to
the building structure and can support the full weight of the fan. Failure to do this can result in serious
injury or death. The stability of the outlet box is essential in minimizing wobble and noise in the fan
after installation is complete.
WARNING: To avoid personal injury, the use of gloves may be necessary while handling fan
parts with sharp edges.
WARNING: Using a full-range dimmer switch to control fan speed will cause a loud humming
noisefromthefan.Toreducetheriskofreorelectricshock,doNOTuseafull-rangedimmerswitch
to control the fan speed.
WARNING: Toreducetheriskofre,electricshock,orpersonalinjury,mountthefantoan
outlet box marked “ACCEPTABLE FOR FAN SUPPORT” and use the mounting screws provided with
theoutletbox.Mostoutletboxescommonlyusedforthesupportoflightingxturesarenotacceptable
forfansupportandmayneedtobereplaced.Consultaqualiedelectricianifindoubt.Securethe
outlet box directly to the building structure. The outlet box and its support must be able to support the
moving weight of the fan (at least 35 lbs.). Do NOT use a plastic outlet box.
WARNING: Toreducetheriskofre,electricalshock,orpersonalinjury,wireconnectors
provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from
the fan. If your house wire is larger than 12 gauges or there is more than one house wire to connect
to the two fan lead wires, consult an electrician for the proper size wire connectors to use.
WARNING: Toreducetheriskofreorelectricshock,donotusethefanwithanysolid-state
speed-control device or control the fan speed with a full-range dimmer switch.
WARNING: Toreducetheriskofre,electricshock,orpersonalinjury,donotbendtheblade
arms when installing them, balancing the blades, or cleaning the fan. Do not insert objects between
the rotating fan blades.
WARNING: To reduce the risk of personal injury, use only parts provided with this fan. The use
of parts OTHER than those provided with this fan will void the warranty.
6
Lowes.com/harborbreeze
SAFETY INFORMATION
CAUTION: Read all instructions and safety information before installing your new fan. Review the
accompanying assembly diagrams.
CAUTION: Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present.
CAUTION: Carefully check all screws, bolts, and nuts on the fan motor assembly to ensure that they
are secured.
CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
PREPARATION
Before beginning the assembly of this product, ensure all parts are present. Compare all parts with
the package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
After opening the top of the carton, remove the mounting hardware package from the foam inserts,
then remove the motor from the packaging and place it on a soft surface, such as a carpet, to avoid
damagetothenish.
Estimated Assembly Time: 120 minutes
Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety
Glasses, Step Ladder, and Wire Strippers
Helpful Tools (not included): AC Tester Light, Tape Measure, Wiring Handbook and Wire Cutters
7Lowes.com/harborbreeze
INITIAL INSTALLATION
1. Turn off the circuit breakers and the wall switch to the
fan supply line leads.
DANGER: Failure to disconnect the power
supply prior to installation may result in serious injury
or death.
1
2. Determine the mounting method to use.
Note:Flushmount installation is not available for this
item.
Important:If using the angle mount, check to ensure
the ceiling angle is not steeper than 25°.
2
Downrod Mounting
Flushmount Closemount
Angle Mounting
3. Ensure the blades (H) will be at least 30 in. from
any obstructions. Also check the downrod (A) length
to ensure the blades (H) will be at least 7 ft. above
theoor. A
H
3
7 ft. min.
30 in. min.
8
Lowes.com/harborbreeze
INITIAL INSTALLATION
4. Remove the two mounting bracket screws (HH) from
the round holes of the canopy (C). Set aside for later
use. Detach mounting bracket (D) from canopy (C).
Secure the mounting bracket (D) to the outlet box
(not included) using screws and washers provided
with the outlet box.
Note:It is very important you use the proper
hardware when installing the mounting bracket
(D) as this will support the fan.
Important:If using the angle mount, ensure the
open end of the mounting bracket (D) is installed
facing the higher point of the ceiling.
Hardware Used
HH Mounting
Bracket Screw x 2
D
4
C
HH
D
5. Remove the motor screws (AA) from the underside of
the motor assembly (F).
Note:If there are plastic motor blocks installed,
discard them but keep the motor screws (AA).
Hardware Used
AA Motor Screw x 10
AA
5
Motor Block
F
For Standard or Angle Mounting Instructions,
continue to page 9. For Closemount Instructions,
proceed to page 12.
9
Lowes.com/harborbreeze
STANDARD OR ANGLE MOUNTING INSTRUCTIONS
1. Remove the downrod pin (EE) and downrod clip
(DD) from the downrod (A). Then partially loosen the
motor-housing set screws (FF) in the yoke at the top
of the motor assembly (F).
Helpful Hint: Downrod style mounting is best suited
for ceilings 8 ft. or higher. For taller ceilings you may
want to use a longer downrod (not included). Angle
style mounting is best suited for angled or vaulted
ceilings. A longer downrod is sometimes necessary
to ensure proper blade clearance.
Hardware Used
DD Downrod Clip x 1
EE Downrod Pin x 1
FF Motor Housing
Set Screw x 2
F
A
DD
EE
FF
A
1
2. Insert the downrod (A) through the canopy (C) and
yoke cover (S). Thread the wires from the motor
housing (F) through the downrod (A).
A
C
S
F
2
10
Lowes.com/harborbreeze
STANDARD OR ANGLE MOUNTING INSTRUCTIONS
3. Slide the downrod (A) into the yoke of the motor
assembly (F), align the holes, and re-install the
downrod clip (DD) and downrod pin (EE). Then
tighten the motor housing set screws (FF).
Hardware Used
DD Downrod Clip x 1
EE Downrod Pin x 1
FF Motor Housing
Set Screw x 2
DD
FF
A
F
EE
3
4. Depending on the length of downrod you use, you
may need to cut the lead wires back to simplify the
wiring. If you decide to cut back the lead wires, it is
suggested that you do so in the following manner:
Take the lead wires and make sure that you have
pulled them all the way through the top of the
downrod and measure 8 in. of lead wire, and then cut
the excess wire off with wire cutters.
4
This manual suits for next models
2
Table of contents
Languages:
Other Harbor Breeze Fan manuals
Harbor Breeze
Harbor Breeze 40837 User manual
Harbor Breeze
Harbor Breeze CHESHIRE II CSD52FBZ5C4S User manual
Harbor Breeze
Harbor Breeze GAT24MBK6LOD User manual
Harbor Breeze
Harbor Breeze LAKE PLACIDO CPK1261 User manual
Harbor Breeze
Harbor Breeze 35063 User manual
Harbor Breeze
Harbor Breeze 40410 User manual
Harbor Breeze
Harbor Breeze TG44BNK3D1RC User manual
Harbor Breeze
Harbor Breeze C-BTH44ABZC5L User manual
Harbor Breeze
Harbor Breeze CENTREVILLE 40117 User manual
Harbor Breeze
Harbor Breeze FLANAGAN User manual
Harbor Breeze
Harbor Breeze ALTISSA User manual
Harbor Breeze
Harbor Breeze TIEMPO E-TM52BNK5CS User manual
Harbor Breeze
Harbor Breeze BTH44ABZC5C User manual
Harbor Breeze
Harbor Breeze CUMBERLAND 42476 User manual
Harbor Breeze
Harbor Breeze ELEVATION LP8006LBN User manual
Harbor Breeze
Harbor Breeze CPW1413 User manual
Harbor Breeze
Harbor Breeze MAZON MZ44BNK3LR User manual
Harbor Breeze
Harbor Breeze 40016 User manual
Harbor Breeze
Harbor Breeze FAIRWIND User manual
Harbor Breeze
Harbor Breeze HTD21011 User manual
Popular Fan manuals by other brands
ELTA FANS
ELTA FANS H03VV-F installation guide
Hunter
Hunter 20714 Owner's guide and installation manual
Emerson
Emerson CARRERA VERANDA CF542ORB00 owner's manual
Hunter
Hunter Caraway Owner's guide and installation manual
Panasonic
Panasonic FV-15NLFS1 Service manual
Kompernass
Kompernass KH 1150 operating instructions
