Harbor Breeze EUK60MBK10LR User manual

Purchase Date

4007498

ITEM #2599787

1058853

HENDERSON LED

CEILING FAN

Español p. 20

MODEL # EUK60MBK10LR

EUK60GV10LR

ATTACH YOUR RECEIPT HERE

SM21655

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 888-251-1003, 8 a.m. - 8 p.m., EST, Monday - Sunday. You could also

HARBOR BREEZE and logo design are

trademarks or registered trademarks of LF, LLC.

APPROVED FOR USE

IN DAMP LOCATIONS

ADJUNTE SU RECIBO AQUÍ

Safety Information ...............................................................................................................

. 2

Package Contents ..............................................................................................................

.. 5

Hardware Contents

...........................................................................................................................

Preparation ........................................................................................................................... 6

Initial Installation ................................................................................................................... 6

Wiring .................................................................................................................................. 10

Final Installation ................................................................................................................... 12

Operating Instructions ......................................................................................................... 16

Care and Maintenance ...................................................................................................

.... 17

Troubleshooting ................................................................................................................... 18

Limited Lifetime Warranty .................................................................................................... 19

Replacement Parts List ....................................................................................................... 19

TABLE OF CONTENTS

SAFETY INFORMATION

CAUTION: Changes or modifications not approved by the party responsible for compliance

could void the user's authority to operate the equipment.

*NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

* Reorient or relocate the receiving antenna.

* Increase the separation between the equipment and receiver.

* Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

The device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, (2) this device must accept any

interference received, including interference that may cause undesired operation.

Distributed by: Litex Industries Inc., P.O. Box 535639, Grand Prairie, TX, 75050; 800-527-1292

NOTE: Dimmable to 10%.

SAFETY INFORMATION

The DC Motor will not operate until blades are installed.

READ AND SAVE THESE INSTRUCTIONS

Please read and understand this entire manual before attempting to assemble, install or

operate the product. Review the accompanying assembly diagrams.

• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for

repairs, it must be shipped in its original packaging to ensure proper protection against damage that

might exceed the initial cause for return.

• Make sure all electrical connections comply with local codes, ordinances, the National Electrical

Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring

handbook if you are unfamiliar with installing electrical wiring.

• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to the

floor and at least 30 in. from the end of the blades to any obstruction.

• After you install the fan, make sure all connections are secure to prevent the fan from falling.

• The net weight of this fan is: 29 lbs.

DANGER

When using an existing outlet box, make sure the outlet box is securely attached to the building

structure and can support the full weight of the fan. Failure to do this can result in serious injury or

death. The stability of the outlet box is essential in minimizing wobble and noise in the fan after

installation is complete.

To reduce the risk of serious bodily injury, DO NOT use power tools to assemble any part of the fan,

including the blades.

To reduce the risk of fire, electrical shock or personal injury, mount fan to outlet box

marked "ACCEPTABLE FOR FAN SUPPORT OF 35 LBS. OR LESS" and use

mounting screws provided with the outlet box. Most outlet boxes commonly used for

the support of lighting fixtures are not acceptable for fan support and may need to be replaced.

Consult a qualified electrician if in doubt.

When mounting fan to a ceiling outlet box, use a METAL octagonal outlet box; do NOT use a plastic

outlet box. Secure the outlet box directly to the building structure. The outlet box and its support

must be able to support the moving weight of the fan (at least 35 lbs.).

To avoid personal injury, the use of gloves may be necessary while handling fan parts with sharp

edges.

To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan

are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your

house wire is larger than 12-gauge or there is more than one house wire to connect to the

corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.

WARNING

CAUTION

Be sure outlet box is properly grounded and that a ground wire (green or bare) is present.

Before beginning installation, carefully check all screws, bolts and nuts on fan motor assembly to

ensure that they are secured.

Once installation is complete, carefully check all screws, bolts and nuts on fan motor assembly to

ensure that they are secured.

Do NOT tamper with or attempt to repair LED component. The light source is designed for this

specific application and should not be serviced by untrained personnel. If any servicing is required,

call our customer service department.

Due to the weight and construction of this fixture, it is advisable to seek the help of another person.

To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed control

device or control fan speed with a full range dimmer switch.

To reduce the risk of fire, electrical shock or personal injury, do not bend the blades when

installing or balancing them or when cleaning the fan. Do not insert objects between the rotating

fan blades.

To reduce the risk of personal injury, use only parts provided with this fan. The use of parts

OTHER than those provided with this fan will void the warranty.

Before proceeding, be sure to shut off electricity at main switch or circuit breaker in order to avoid

electrical shock.

This fan MUST be installed with the safety cable provided with the fan. Failure to use the safety

cable provided may result in personal injury, damage to the fan or damage to other property.

WARNING

SAFETY INFORMATION

PACKAGE CONTENTS

DESCRIPTIONPART QUANTITY DESCRIPTIONPART QUANTITY

IMPORTANT REMINDER: You must use the parts provided with this fan for proper installation

and safety.

A Mounting Bracket 1

B Canopy Mounting Screw 2

(preassembled)

C Downrod 1

D Pin (preassembled) 1

EClip (preassembled) 1

F Canopy 1

G Canopy Cover 1

H Yoke Cover 1

I Motor Assembly 1

J Blade 10

K Blade Bracket 5

LBlade Bar 10

M Shade 1

N Remote Pack 1

Safety Cable (preassembled)

Remote Control Receiver

HARDWARE CONTENTS (shown actual size)

Before beginning assembly of product, make sure all parts are present. Place motor on carpet or on

foam to avoid damage to ﬁnish. Compare parts with package contents list and hardware contents list.

If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 120 minutes

Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety

Glasses, Stepladder, Wire Strippers and Precision Screwdriver (0 x 2 in.).

Helpful Tools (not included): AC Tester Light, Tape Measure, Do-It-Yourself Wiring Handbook and

Wire Cutters.

PREPARATION

Blade

Screw/Washer

Qty. 40

+ 1 extra

Wire

Connector

Qty. 3

AA BB CC

INITIAL INSTALLATION

OFF

Turn off circuit breakers and wall switch to the fan

supply line leads.

DANGER: Failure to disconnect power supply

prior to installation may result in serious injury or

death.

Decorative

Nut

Qty. 20

+ 1 extra

INITIAL INSTALLATION

Check to make sure blades (J) will be at least

30 inches from any obstruction at least 7 ft. above

the floor.

2. Determine mounting method to use.

A. Standard mount

B. Angle mount

IMPORTANT: If using the angle mount, ensure the

ceiling angle is not steeper than 19°.

NOTE: Closemount option is not available for this

fan.

*Helpful Hint: Downrod-style mounting is best

suited for ceilings 8 ft. high or higher. For taller

ceilings you may want to use a longer downrod

(not included). Angle-style mounting is best suited

for angled or vaulted ceilings. A longer downrod is

sometimes necessary to ensure proper blade

clearance.

7 ft.

min.

30 in.

min.

19° max.

Open End

4ANGLE MOUNTSTANDARD MOUNT

Secure mounting bracket (A) to outlet box (not

included) using screws, spring washers and flat

washers provided with the outlet box.

*NOTE: It is very important you use the proper

hardware when installing the mounting bracket (A)

as this will support the fan.

IMPORTANT: If using the angle mount, make sure

open end of mounting bracket (A) is installed facing

the higher point of the ceiling, and ensure the

ceiling angle is not steeper than 19°.

INITIAL INSTALLATION

Remove pin (D) and clip (E) from downrod (C).

Partially loosen preassembled set screws and nuts

in yoke at top of motor assembly (I).

5a. 5A 5B

Set Screw

Sideview

Yoke

6. Insert downrod (C) through canopy (F), canopy

cover (G) and yoke cover (H). NOTE: Canopy

cover (G) must be turned with the shiny side

toward the motor assembly (I).

Then, thread wires and safety cable (O) from

motor assembly (I) through downrod (C).

7. Slip downrod (C) into yoke, align holes and

re-install pin (D) and clip (E). Tighten set screws

in yoke and then tighten preassembled nuts on

the set screws. Then, slide yoke cover (H) down

until it rests on top of motor assembly (I).

Yoke

Set Screw

and Nut

Sideview

5b.

INITIAL INSTALLATION

Install hanging ball of downrod (C) into opening of

mounting bracket (A). Align one of the slots in

hanging ball with tab in mounting bracket (A).

DANGER: Failure to align one of the slots in

the ball with the tab may result in serious injury or

death.

Tab

Slot

If you decided to cut back the lead wires in Step 8,

strip 1/2 in. of insulation from end of each

wire -- WHITE, BLACK, AND GREEN (if

applicable). Twist stripped ends of each strand of

wire within the insulation with pliers (not included).

Depending on the length of downrod you use, you

may need to cut the lead wires back to simplify

the wiring. If you decide to cut back the lead

wires, it is suggested you do so in the following

manner:

Take the lead wires and make sure you have

pulled them all the way through the top of the

downrod. Start at the TOP of the hanging ball on

the downrod and measure 8 in. of lead wire, then

cut the excess wire off with wire cutters (not

included).

NOTE: If you do not cut back the lead wires,

Steps 8 and 9 are not necessary and you may

proceed to Step 10 instead.

Hanging

Ball

8 in.

10.

Wood Screw,

Washer and

Lock Washer

Wood

Joist

Loop

11. 11

Find a secure attachment point (wood ceiling joist

recommended) and secure safety cable (O). Use a

heavy-duty wood screw, washer and lock washer

(not included) to secure safety cable (O) loop. The

loop at the end of the safety cable (O) should just

fit over the threads on the wood screw (not

included) used to secure it.

Test safety cable (O) by pulling on loose end of

cable with pliers. If the safety cable (O) slips, the

loop must be adjusted tighter.

NOTE: Extra cable slack can be left in ceiling area.

INITIAL INSTALLATION

WARNING: To reduce the risk of fire, electrical shock or personal injury, wire connectors

provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from

the fan. If your house wire is larger than 12-gauge or there is more than one house wire to connect to

the corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.

CAUTION: Be sure outlet box is properly grounded and that a ground (green or bare) wire is

present.

WARNING: If house wires are different colors than referred to in the following steps, stop

immediately. A professional electrician is recommended to determine wiring.

WARNING: Using a full range dimmer switch (not included) to control fan speed will cause a loud

humming noise from fan. To reduce the risk of fire or electrical shock, do NOT use a full range

dimmer switch to control fan speed.

WIRING

IMPORTANT: Make the necessary wiring connections for

remote control operation as detailed on next page. For each

wire connection, use one of the wire connectors from the

remote pack (R), making sure to screw wire connector on in

a clockwise direction.

Wire

Connectors

This manual suits for next models

Table of contents

Other Harbor Breeze Fan manuals

Harbor Breeze

Harbor Breeze 40410 User manual

Harbor Breeze

Harbor Breeze Bath Ventilator with Light User manual

Harbor Breeze

Harbor Breeze BRISTLE AR13-44BLK AR13-44BN User manual

Harbor Breeze

Harbor Breeze CLASSIC STYLE BDB52LW5N User manual

Harbor Breeze

Harbor Breeze FW60AGV3LR User manual

Harbor Breeze

Harbor Breeze 40105 User manual

Harbor Breeze

Harbor Breeze 40045 User manual

Harbor Breeze

Harbor Breeze 42224 User manual

Harbor Breeze

Harbor Breeze 00728 User manual

Harbor Breeze

Harbor Breeze CGR60WW3LR User manual

Harbor Breeze

Harbor Breeze LARALYN LRN32 User manual

Harbor Breeze

Harbor Breeze 00878 User manual

Harbor Breeze

Harbor Breeze VALDOSTA L1120H-BK User manual

Harbor Breeze

Harbor Breeze CALERA CLRO52-II User manual

Harbor Breeze

Harbor Breeze RC103L User manual

Harbor Breeze

Harbor Breeze Bath Ventilator with Light User manual

Harbor Breeze

Harbor Breeze BELLEVUE E-BE44ABZ5C User manual

Harbor Breeze

Harbor Breeze Impact 00966 User manual

Harbor Breeze

Harbor Breeze TALAMORE TAL60MBK8LR User manual

Harbor Breeze

Harbor Breeze CLASSIC STYLE BDB52LW5N User manual

Harbor Breeze

Harbor Breeze 40821 User manual

Harbor Breeze

Harbor Breeze 00881 User manual

Harbor Breeze

Harbor Breeze COGDELL COG60BNK7LR User manual

Harbor Breeze

Harbor Breeze FWH60BNK3LRS User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual