Harbor Breeze 40680 User manual

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m.,

EST, Friday.

ATTACH YOUR RECEIPT HERE

Purchase Date _________________________

Harbor Breeze® is a registered trademark

EB16198

Español p. 18

ITEM #0807431

BUILDER’S SERIES

CEILING FAN

MODEL #40680

TABLE OF CONTENTS

Package Contents .................................................................3

Hardware Contents ................................................................4

Safety Information .................................................................5

Preparation ......................................................................6

Initial Installation ..................................................................7

Wiring ..........................................................................9

Final Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Operating Instructions .............................................................13

Care and Maintenance ............................................................14

Troubleshooting..................................................................14

Limited Lifetime Warranty ..........................................................16

Replacement Parts List ............................................................17

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

A Upper Mounting Bracket 1

B Lower Mounting Bracket (preassembled to Motor [C]) 1

C Motor 1

D Switch Housing (preassembled to Motor [C]) 1

E Light Kit (preassembled to the Switch Housing [D]) 1

F Motor Housing 1

GBlade Arm 4

H Blade 4

I Glass Globe 1

J Bulb 1

K Lower Bracket Screw (preassembled to Lower Mounting Bracket [B]) 1

L Thumbscrew (preassembled to Light Kit [E]) 3

M Motor Screw (preassembled to Motor [C]) 8 + 1 extra

N Motor Housing Screw (preassembled to Upper Mounting Bracket [A]) 4

O Blade Balancing Kit 1

P Upper Bracket Screw (preassembled to Upper Mounting Bracket [A]) 2

G H I J

K L M N O P

HARDWARE CONTENTS (shown actual size)

Blade Screw

Qty. 12 + 1 extra

Blade Washer

Qty. 12 + 1 extra

Pull Chain Extension

Qty. 2

Wire Connector

Qty. 4

AA BB CC DD

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the

product.

• Before you begin installing the fan, disconnect the power by removing fuses or turning off the circuit

breakers.

• Make sure all electrical connections comply with local codes, ordinances, the National Electrical

CodeandANSI/NFPA70-199.Hireaqualiedelectricianorconsultado-it-yourselfwiring

handbook if you are unfamiliar with installing electrical wiring.

• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to

theoorandatleast30in.fromtheendofthebladestoanyobstruction.

• The net weight of this fan is: 9.68 lbs.

DANGER: When using an existing outlet box, make sure the outlet box is securely attached to

the building structure and can support the full weight of the fan. Failure to do this can result in serious

injury or death. The stability of the outlet box is essential in minimizing wobble and noise in the fan

after installation is complete.

WARNING: To avoid personal injury, the use of gloves may be necessary while handling fan

parts with sharp edges.

WARNING: Toreducetheriskofre,electricshockorpersonalinjury,mountthefantoanoulet

box marked “ACCEPTABLE FOR FAN SUPPORT” and use the mounting screws provided with the

outletbox.Mostoutletboxescommonlyusedforthesupportoflightingxturesarenotacceptable

forfansupportandmayneedtobereplaced.Consultaqualiedelectricianifindoubt.Securethe

outlet box directly to the building structure. The outlet box and its support must be able to support the

moving weight of the fan (at least 35 lbs.).

WARNING: Toreducetheriskofre,electricshockorpersonalinjury,wireconnectorsprovided

with this fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If

your house wire is larger than 12-gauge and/or there is more than one house wire to connect to the

two fan lead wires, consult an electrician for the proper size wire connectors to use.

WARNING: Toreducetheriskofreorelectricshock,donotusethefanwithanysolid-state

speed-control device or control the fan speed with a full-range dimmer switch.

WARNING: Toreducetheriskofre,electricshockorpersonalinjury,donotbendtheblade

arms when installing them, balancing the blades or cleaning the fan. Do not insert objects between

the rotating fan blades.

WARNING: TTo reduce the risk of personal injury, use only parts provided with this fan. The use

of parts OTHER than those provided with this fan will void the warranty.

SAFETY INFORMATION

CAUTION: Read all instructions and safety information before installing your new fan. Review the

accompanying assembly diagrams.

CAUTION: Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present.

CAUTION: Carefully check all screws, bolts and nuts on the fan motor assembly to ensure they are

secured.

CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver

--Connect the equipment into and outlet on a circuit different from that to which the receiver is

connected.

--Consult the dealer or an experienced radio/TV technician for help.

Pleasenotechangesormodicationsnotexpresslyapprovedbythepartyresponsibleforcompliance

could void the user’s authority to operate the equipment.

PREPARATION

Before beginning the assembly of this product, ensure that all parts are present. Compare all parts

with the package contents list and hardware contents list. If any part is missing or damaged, do not

attempt to assemble the product.

After opening the top of the carton, remove the mounting hardware package from the foam inserts,

then remove the motor assembly from the packaging and place it on a soft surface, such as a carpet,

toavoiddamagetothenish.

Estimated Assembly Time: 120 minutes

Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety

Glasses, Step Ladder, Wire Cutters and Wire Strippers

Helpful Tools (not included): AC Tester Light, Tape Measure and Wiring Handbook

INITIAL INSTALLATION

1. Turn off the circuit breakers and the wall switch to the

fan supply line leads.

DANGER: Failure to disconnect the power

supply prior to installation may result in serious injury

or death.

2. This fan is intended for Flushmount installations.

Standard Mounting, Angled Mounting and Closemount

installations are not available.

Standard Mounting

Flushmount Closemount

Angle Mounting

3. Ensure the blades (H) will be at least 30 in. from

anyobstructionsandatleast7ft.abovetheoor.

7 ft. Min

30 in. Min

INITIAL INSTALLATION

4. Secure the upper mounting bracket (A) to the

outlet box (not included) using screws and washers

provided with the outlet box.

CAUTION: It is very important you use the proper

hardware when installing the upper mounting bracket

(A) as it will support the fan.

5. Remove the preassembled lower bracket screw (K)

from the lower mounting bracket (B) and the upper

bracket screws (P) from the upper mounting bracket

(A). Insert the tab of the lower mounting bracket (B)

into the slot in the upper mounting bracket (A).

6. Re-install the previously removed lower bracket screw

(K) and upper bracket screws (P) to secure the lower

mounting bracket (B) to the upper mounting bracket (A).

WIRING

WARNING:Toreducetheriskofre,electricalshockorpersonalinjury,wireconnectorsprovided

with this fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If

your house wire is larger than 12 gauges and/or there is more than one house wire to connect to the

two fan lead wires, consult an electrician for the proper size wire connectors to use.

CAUTION: Be sure the outlet box is properly grounded or that a Ground (Green or Bare) wire is present.

1. Connect household supply and fan wires according to

the diagram and these steps:

•ConnecttheGreenwirefromthefantotheBare/

Green supply wire.

•ConnecttheWhitewirefromthefantotheWhite

supply wire.

•ConnecttheBlackandBluewiresfromthefantothe

Black supply wire.

•Secureallwiringconnectionstogetherwithwire

connectors (DD).

Note: If there is a second hot/power wire coming from

the outlet box, connect it to the blue (light power) fan

wire for separate light and fan control.

Note: The Black wire is hot power for the fan. The

White wire is common for the fan and light kit. The

Blue wire is hot power for light. The Green wire is the

ground wire. If household supply wires are different

colors than referred to above, it is recommended a

professional electrician determines the proper wiring.

Hardware Used

DD Wire Connector x 3

2. Wrap electrical tape (not included) around each

individual wire connector (DD) down to the wire.

3. Turn the spliced/taped wires upward and gently push

the wires and wire connectors (DD) into the outlet box.

WARNING: Ensure no bare wire or wire strands

are visible after making connections. Place the Green

and White wire connections on the opposite side of the

outlet box from the Black and Blue wire connections.

Black (Hot)

White (Neutral)

Bare/Green (Ground)

Black

Blue

White

Green

FINAL INSTALLATION

1. Temporarily lift the motor housing (F) to the upper

mounting bracket (A) to determine which two motor

housing screws (N) preassembled in the sides of

the upper mounting bracket (A) align with the slotted

holes in the top edge of the motor housing (F).

Partially loosen the two motor housing screws (N) that

align with the slotted holes.

Remove the other two motor housing screws (N) from

the upper mounting bracket (A).

2. Slide the motor housing (F) over the motor (C),

aligning the slotted holes in the motor housing (F) with

the loosened motor housing screws (N) in the upper

mounting bracket (A). Twist the motor housing (F) to

lock, then re-insert the two previously removed motor

housing screws (N) and securely tighten all screws.

3. Partially insert the blade screws (AA) along with the

blade washers (BB) through the blade (H) and into the

blade arm (G). Tighten each blade screw (AA) with a

Phillips screwdriver (not included), starting with the

one in the middle. Repeat this step for the remaining

blades (H) and blade arms (G).

Hardware Used

AA Blade Screw x 12

Blade Washer x 12

3AA

This manual suits for next models

Table of contents

Other Harbor Breeze Fan manuals

Harbor Breeze

Harbor Breeze CLASSIC STYLE BDB52LW5N User manual

Harbor Breeze

Harbor Breeze CLASSIC STYLE BDB52LW5N User manual

Harbor Breeze

Harbor Breeze 0228113 User manual

Harbor Breeze

Harbor Breeze VALDOSTA L1120H-BK User manual

Harbor Breeze

Harbor Breeze TEX52MBK5C1L User manual

Harbor Breeze

Harbor Breeze L1901 User manual

Harbor Breeze

Harbor Breeze COGDELL COG60BNK7LR User manual

Harbor Breeze

Harbor Breeze CEDAR HILL User manual

Harbor Breeze

Harbor Breeze 40105 User manual

Harbor Breeze

Harbor Breeze L1305 User manual

Harbor Breeze

Harbor Breeze BRISTLE AR13-44BLK AR13-44BN User manual

Harbor Breeze

Harbor Breeze CHESHIRE II CSD52FBZ5C4S User manual

Harbor Breeze

Harbor Breeze RLG52NWZ5L User manual

Harbor Breeze

Harbor Breeze CHESHIRE II User manual

Harbor Breeze

Harbor Breeze EDENTON L2B1 User manual

Harbor Breeze

Harbor Breeze OCEANSIDE User manual

Harbor Breeze

Harbor Breeze ANNANDALE 42864 User manual

Harbor Breeze

Harbor Breeze BATTLER E-LUK52HBB5LEDR User manual

Harbor Breeze

Harbor Breeze ELEVATION LP8006LBN User manual

Harbor Breeze

Harbor Breeze ECHOLAKE 42080 User manual

Harbor Breeze

Harbor Breeze 40410 User manual

Harbor Breeze

Harbor Breeze 42612 User manual

Harbor Breeze

Harbor Breeze KITSILANO User manual

Harbor Breeze

Harbor Breeze ARMITAGE CC52WW5C User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual