Godex ZX1200i User manual

ZX1200

/ZX1300

ZX1600

BARCODE PRINTER

USER MANUAL

User Manual

Version

Issue Date

P/N

: ZX1200i series

: Rev. 1.0

: 2013.12.12

: 920-015111-00

Contents

ZX1200

/ZX1300

ZX1600

USER MANUAL

CONTENTS

1 Barcode Printer 001

1.1

1.2

Box Content

Getting to Know Your Printer

001

002

Printer Setup

004

2.1

2.2

2.3

2.4

Loading the label roll

Loading & Removing the Ribbon

Connecting the Printer to the Host Computer

Installing Printer Driver and GoLabel with Super

Wizard CD

004

008

011

012

Printer Setting and Control

017

3.1

3.2

3.3

3.4

3.5

3.6

Operation Panel

LCD Interface Introduction

LCD Interface Function

Label Calibration and Self-Test

Error Alerts

USB Host

017

018

023

028

030

031

4 NetSetting for Ethernet 034

4.1

4.2

Installing the NetSetting Software

The Interface of NetSetting

034

035

5 Accessories 042

5.1

5.2

Preparation Steps

Installing the Cutter

042

039

6 Maintenance and Adjustment 046

6.1

6.2

6.3

6.4

6.5

6.6

6.7

6.8

Installing / removing the print head module

Adjusting the print line

Adjusting ribbon tension

Cleaning the thermal print head

Adjusting the balance and print head tension

Ribbon shield settings

Cutter settings

Troubleshooting

046

047

Appendix

Declaration

ZX1200

/ZX1300

ZX1600

USER MANUAL

FCC COMPLIANCE STATEMENT

FOR AMERICAN USERS

This equipment has been tested and found to comply with the limits for a CLASS A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at own expense.

ZX1200i SERIES

TO WHICH THIS DECLARATION RELATES

IS IN CONFORMITY WITH THE FOLLOWING STANDARDS

CFR 47, Part 15

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference

in which case the user may be required to take adequate measures.

此为Class A产品，在生活环境中，该产品可能造成无线电干扰，在这种情况下，可能需要用户对其干扰采取切实可行

的措施。

Declaration

Safety instructions

SAFETY INSTRUCTIONS

Please read the following instructions carefully.

1. Keep the equipment away from humidity.

2. Before you connect the equipment to the power outlet, please

check the voltage of the power source.

3. Make sure the printer is off before plugging the power connector

into the power jack.

4. It is recommended that you connect the printer to a surge

protector to prevent possible transient overvoltage damage.

5. Be careful not to get liquid on the equipment to avoid electrical

shock.

6. For safety and warranty reasons, ONLY qualified service personnel

should open the equipment.

7. Do not repair or adjust energized equipment under any

circumstances.

**** Danger of explosion if battery is incorrectly replaced. Replace only with the equivalent type recommended by

the manufacturer.

**** Dispose of used batteries according to the manufacturer’s instructions.

****Only use with designated power supply adapter model.

**** Changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Specifications are subject to change without notice.

Caution

ZX1200

/ZX1300

ZX1600

USER MANUAL

1Barcode Printer

1.1 Box Content

Please check that all of the following items are included with your printer.

ZX1200i / ZX1300i / ZX1600i Barcode Printer



Including GoLabel software

and user’s manual.



ZX1200i / ZX1300i / ZX1600i Series

Quick Guide

ZX1200i / ZX1300i / ZX1600i Series

USB Cable



Label Stock



Ribbon

Power Adapter

Power Cord



Front View



1Barcode Printer

1.2 Getting to Know Your Printer

Device Overview

Rear View



Stylus Pen

TOUCH PANEL

POWER BUTTON

FEED BUTTON

LOWER COVER PLATE

USB HOST

PRINTER COVER

VIEWING WINDOW

Feed slot for continuous labels

Calibration button

Ethernet port

Serial port (DB-9)

Applicator Interface(OPTION)

USB port

USB Host

Parallel port(OPTION)

Power jack

On/Off switch

1Barcode Printer

The Internal View of Printer

Ribbon rewind hub

Ribbon supply hub

Print mechanism

Platen roller

Release lever

for print head

Paper guide

Label tension guide

Label supply hub Label roll guide

Adjustable Sensor

RFID module

Paper guide

This printer supports the following printing methods:

Thermal transfer printing (TTP)：Requires a ribbon for transferring a printed image to a medium.

Direct thermal printing (DTP)：Does not require a ribbon, only thermal paper.

Please check which printing method you are using and alter the settings accordingly in the printer driver,

printer menu, and/or software.

Turn it anticlockwise to a top right position as shown in the illustration

2.1 Loading the label roll

2Printer Setup

Place the printer on a flat surface

and open the printer cove

Now slide the label roll guide forward and fold it down

Place the label roll on the label supply hub

, pushing it right up to the printer housing.

(Do not apply too much pressure to avoid

damaging the label stock.)

* When moving the label roll guide, hold it only by the end that is attached to the bracket, not by its top.

Note

2Printer Setup

Load the label roll into the printer as shown in the illustration.

Pass it through the printer as indicated by the red arrows.

Pass the label stock through the

Adjustable Sensor and up to the tear-off plate.

* Remember to set the movable sensor to gap, black mark, or tag hole by changing the position of the sensor with the

adjustment wheel.

Note

2Printer Setup

Other manuals for ZX1200i

This manual suits for next models

Table of contents

Godex ZX1200i User manual

Popular Barcode Reader manuals by other brands