Godex EZ100 Series User manual

EZ100/EZ300/EZ500 series

BARCODE PRINTER

USER MANUAL

User Manual : EZ100/EZ300/EZ500 series

Version : C

Issue Date : 2020/08/28

P/N : 920-015511-00

EZ100/EZ300/EZ500 Series

CONTENTS

1. Barcode Printer...............................................................................................2

1-1 Box Content..........................................................................................................................2

1-2 Getting To Know Your Printer.............................................................................................3

2. Printer Setup...................................................................................................5

2-1 Open The Printer Cover.......................................................................................................5

2-2 Open The Printing Mechanism ...........................................................................................6

2-3 Loading The Ribbon ............................................................................................................7

2-4 Loading The Label Roll........................................................................................................9

2-5 Loading The Label Roll (Label Dispenser Model)...........................................................11

2-6 Loading The Label Roll (Cutter Model)............................................................................14

2-7 Installing The Label Supply Hub Base On Internal Diameter ........................................15

2-8 Preparing For Tag Printing................................................................................................16

2-9 Connecting The Printer To The Host Computer ............................................................17

2-10 Installing The Driver.........................................................................................................18

3. Operation Panel............................................................................................21

3-1 LED Operation Panel ........................................................................................................21

3-2 Error Alerts .........................................................................................................................22

3-3 Label size calibration and Self Test Page........................................................................23

3-4 Operation Panel..................................................................................................................24

4. NetSetting for Ethernet................................................................................25

4-1 Installing The NetSetting software...................................................................................25

4-2 The interface of NetSetting ..............................................................................................26

5. Maintenance And Adjustment.....................................................................33

5-1 Cleaning The Print Head....................................................................................................33

5.2 Adjusting The Print Head Pressure..................................................................................34

5-3 Adjusting The Print Line....................................................................................................34

5-4 Cleaning The Cutter (Cutter Model) ................................................................................35

5-5 Troubleshooting.................................................................................................................36

Appendix -EZ100 Series Printer Specifications ....................................................................37

Appendix -EZ300/EZ500 Series Printer Specifications ........................................................38

EZ100/EZ300/EZ500 Series

Declaration

FCC COMPLIANCE STATEMENT

FOR AMERICAN USERS

This equipment has been tested and found to comply with the limits for a CLASS A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference at own

expense.

EMS AND EMI COMPLIANCE STATEMENT

FOR EUROPEAN USERS

This equipment has been tested and passed with the requirements relating to electromagnetic compatibility

based on the standards EN 55022:2006/A1:2007 Class A, EN61000-3-2:2006, EN 61000-3-3:2008 and

EN55024:1998/A1:2001/A2:2003, IEC 61000-4-2:2008 series, The equipment also tested and passed in

accordance with the European Standard EN55022 for the both Radiated and Conducted emissions limits.

EZ100/EZ300/EZ500 SERIES

TO WHICH THIS DECLARATION RELATES

IS IN CONFORMITY WITH THE FOLLOWING STANDARDS

IEC 60950-1:2005(2nd Edition)+Am 1:2009, GB9254-2008 (Class A ) ; GB17625. 1-2003; GB4943.1-2011,

EN 55022:2006/A1:2007 Class A, EN61000-3-2:2006, EN 61000-3-3:2008 and

EN55024:1998/A1:2001/A2:2003, IEC 61000-4-2:2008 series, UL 60950-1, 1st Edition, 2007-10-31, CSA

C22.2 No. 60950-1-03, 1st Edition, 2006-07, CFR 47, Part 15

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case

the user may be required to take adequate measures.

此为 Class A 产品，在生活环境中，该产品可能造成无线电干扰，在这种情况下，可能需要用户对其干扰采取

切实可行的措施。

EZ100/EZ300/EZ500 Series

SAFETY INSTRUCTIONS

Please read the following instructions carefully.

1. Keep the equipment away from humidity.

2. Before you connect the equipment to the power outlet, please check the voltage of the power

source.

3. Make sure the printer is off before plugging the power connector into the power jack.

4. It is recommended that you connect the printer to a surge protector to prevent possible transient

overvoltage damage.

5. Be careful not to get liquid on the equipment to avoid electrical shock.

6. For safety and warranty reasons, ONLY qualified service personnel should open the equipment.

7. Do not repair or adjust energized equipment under any circumstances.

CAUTION

⚫Danger of explosion if battery is incorrectly replaced. Replace only with the equivalent type

recommended by the manufacturer.

⚫Dispose of used batteries according to the manufacturer’s instructions.

⚫Only use with designated power supply adapter model.

⚫Changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

EZ100/EZ300/EZ500 Series

1. Barcode Printer

1-1 Box Content

Please check that all of the following items are included with your printer.

Barcode Printer Ribbon Hubs ( set of 2 )

Power Adapter

AC Adapter Label Supply Hub

USB Cable Label Guide Plates ( set of 2 )

Ribbon Quick Guide

Label Stock

Empty Ribbon Core

CD ( with GoLabel software /

user manual )

EZ100/EZ300/EZ500 Series

1-2 Getting To Know Your Printer

Front View

Rear View

TOP COVER

LED INDICATOR

FEED BUTTON

FRONT COVER

COVER OPEN

BUTTONS

POWER SWITCH

FAN-FOLD LABEL INSERT

ETHERNET PORT

USB PORT

POWER JACK

EZ100/EZ300/EZ500 Series

Open The Printer Cover

Open The Printing Mechanism

ADJUSTMENT SCREW ( LEFT )

Screw for adjusting the print head pressure

LABEL SUPPLY MODULE

- LABEL SUPPLY HUB

- LABEL GUIDE PLATES ( SET of 2 )

ADJUSTMENT SCREW ( RIGHT )

Screw for adjusting the print head pressure

RIBBON MODULE

-RIBBON FEED MECHANISM

- RIBBON HUB

- EMPTY RIBBON CORE

LABEL GUIDE ( LEFT )

ADJUSTMENT SCREW

Screw for adjusting

the print line

LABEL GUIDE ( RIGHT )

PLATEN

LABEL SENSOR

Movable

RIBBON SUPPLY HUB

PRINTING MECHANISM

RELEASE CATCH ( RIGHT )

RELEASE CATCH ( LEFT )

EZ100/EZ300/EZ500 Series

2. Printer Setup

2-1 Open The Printer Cover

➢Pressing The Cover Open Buttons

Place the printer on a flat surface. Open the printer cover by pressing the release buttons on both sides of the

printer housing and lift the cover.

COVER OPEN BUTTONS

Release buttons for opening the printer cover.

Pressing the button

Lift the printer cover backward

EZ100/EZ300/EZ500 Series

2-2 Open The Printing Mechanism

➢Pressing The Release Catches

Release and lift the printing mechanism.

Pressing

Lift the printing mechanism

RELEASE CATCHES

EZ100/EZ300/EZ500 Series

2-3 Loading The Ribbon

➢A New Ribbon Module Installation

Place the new ribbon on the hub which forms a ribbon supply hub.

Place the empty ribbon core on the hub which forms a ribbon rewind hub.

Stick the ribbon supply hub on the ribbon rewind hub and wind the rewind hub 2~3 circles.

NEW RIBBON

RIBBON HUB

Place on the hub

RIBBON SUPPLY HUB

EMPTY RIBBON CORE

RIBBON HUB

Place on the hub

RIBBON FEED MODULE

Wind the ribbon around the core 2~3 circles

This manual suits for next models

Table of contents

Godex EZ100 Series User manual

Popular Barcode Reader manuals by other brands