Godex BP300 User manual

BP300/BP330 BARCODE PRINTER

USER MANUAL

User Manual

Version

Issue Date

P/N

: BP300 series

: Rev. A

: 2015.01.20

: 920-015711-00

Contents

BP300/BP330 USER MANUAL

CONTENTS

Barcode Printer

001

1.1

1.2

Box Content

Getting To Know Your Printer

001

002

Printer Setup

004

2.1

2.2

2.3

2.4

2.5

2.6

2.7

Open The Printer Cover

Open The Printing Mechanism

Loading The Ribbon

Loading The Label Roll

Installing The Label Supply Hub

Connecting The Printer To The Host Computer

Installing The Driver

004

005

009

012

013

015

Operation Panel

018

3.1

3.2

3.3

LED Operation Panel

Error Alerts

Label Calibration and Self Test Page

018

019

020

4 NetSetting For Ethernet 021

4.1

4.2

Installing The NetSetting Software

The Interface of NetSetting

021

022

5 Maintenance and Adjustment 029

5.1

5.2

5.3

5.4

Cleaning The Print Head

Adjusting The Print Head Pressure

Adjusting The Print Line

Troubleshooting

029

030

031

032

Appendix

Product Specifications

Interface

BP300 SERIES

BP300 Barcode Printer



1Barcode Printer

1.1 Box Content

Please check that all of the following items are included with your printer

USB Cable



Including QLabel software

and BP300 user manual.



Ribbon Module

Empty Ribbon Core

Ribbon

Power Adapter

Power Cord

AC Adapter



Label Supply Module

Label Supply Hub

Label Guide Plates(Set of 2)

Label Stock



BP300 Quick Guide



BP300/BP330

Front View



1Barcode Printer

1.2 Getting To Know Your Printer

002

Device Overview

Rear View



TOP COVER

COVER OPEN BUTTONS

Release buttons for opening the printer cover

LED INDICATOR

FEED BUTTON

LED OPERATION PANEL

ETHERNET PORT

POWER SLOT

POWER SWITCH

- ON

- OFF

FAN-FOLD LABEL INSERT

Feed slot for continuous labels

USB PORT

SERIAL PORT

1Barcode Printer

Open The Printer Cover

RELEASE CATCH(Left)

SCREW(Left)

Screw for adjusting the print head pressure

LABEL SUPPLY MODULE

- LABEL SUPPLY HUB

- LABEL GUIDE PLATES(Set of 2)

RELEASE CATCH(Right)

SCREW(Right)

Screw for adjusting the print head pressure

RIBBON REWIND WHEEL

HOLDER OF RIBBON REWIND CORE

003

Open The Printing Mechanism

PLATEN

LABEL GUIDE(Right)

LABEL SENSOR

LABEL GUIDE(Left)

ADJUSTMENT SCREW

Screw for adjusting

the printer line

PRINTING MECHANISM

RIBBON SUPPLY

WHEEL

HOLDER OF

RIBBON SUPPLY CORE

PRINT HEAD

2Printer Setup

2.1 Open The Printer Cover

Pressing The Cover Open Buttons

Place the printer on a flat surface. Open the printer cover by pressing the release buttons on both sides of the printer

housing and lift the cover.

004

Lift the printer cover backward

COVER OPEN BUTTONS

Release buttons for opening the printer cover.

Pressing the button

Lift the printing mechanism

Pressing

RELEASE CATCHES

2.2 Open The Printing Mechanism

Pressing The Release Catches

Release and lift the printing mechanism.

2Printer Setup

2.3 Loading The Ribbon

A New Ribbon Module Installation

NEW RIBBON EMPTY RIBBON CORE

Wind the ribbon around the core

1. Attach the ribbon to the empty ribbon core with the adhesive strip at the end of the ribbon.

2. Wind the ribbon around the empty ribbon core for 2 to 3 circles.

Stick on empty ribbon core

Notch on left side

A NEW RIBBON MODULE

RIBBON SUPPLY

RIBBON REWIND

3. A ribbon module is assembled as below.

2Printer Setup

006

2. Then place the left-hand side of the ribbon.

Load The Ribbon On The Printer

For Ribbon Supply Module

1. Place the right-hand side of ribbon first.

RIBBON SUPPLY MODULE

Right side

Push the ribbon to tighten

the spring of the holder

HOLDER

SPRING OF HOLDER

Align the ribbon core

to the holder

Left side

NOTCH OF RIBBON CORE

SPOKE

GEAR

Rotate the gear for alignment

if necessary

Align the notch of the ribbon core to the spoke

2Printer Setup

007

3. Close the printing mechanism to complete the ribbon supply module loading.

Load The Ribbon On The Printer

For Ribbon Rewind Module

RIBBON REWIND MODULE

1. Place the right-hand side of empty ribbon core first.

Right side

Align the empty ribbon core

to the holder

HOLDER

Push the empty ribbon core

to tighten the spring of the holder

SPRING OF HOLDER

Close the printing mechanism

This manual suits for next models

Table of contents

Godex BP300 User manual

Popular Barcode Reader manuals by other brands