GE Concord User manual
Concord/Express
quick reference guide
1. Set your alarm when leaving home (motion detectors ON):
a. Close doors and windows until no zones show open.
b. Press AWAY (3) + User Code.
c. Red “ARMED” light will turn on. Exit the premises within 60 seconds.
2. Disarm the system (or cancel an accidental alarm):
a. Keypad will beep. You have 30 seconds to disarm.
b. Press OFF (1) + User Code.
3. Set the alarm when at home with a delay (motion detectors OFF):
a. Close doors and windows until no zones show open.
b. Press STAY (2) + User Code.
c. Red “ARMED” light will turn on.
4. Disarm before opening doors:
a. Press OFF (1) + User Code.
5. Set the alarm when at home with no delay (motion detectors OFF):
a. Close doors and windows until no zones show open.
b. Press STAY (2) + User Code + Press NO DELAY (4) button.
c. Red “ARMED” light will turn on.
6. If an alarm has been triggered:
a. Before proceeding, verify that the alarm was triggered accidentally. If you
aren’t sure, wait for the phone call from central station.
b. If accidental, press OFF (1) + User Code. This will silence the alarm and cancel
dispatch.
Continued on Back
7. Turn the door chime on or off:
a. Press CHIME (7) + 1.
b. You will hear three beeps if enabled, one beep if disabled.
c. 8. Check system status:
d. Press * for short status
e. Press * * for long status
f. To change your four-digit Master Code:
g. Press 9 then the four digit master code
h. It will say TIME and DATE
i. Press the down arrow or 8 button until it says USER CODES
j. Press#
k. Press the down arrow or 8 button until it says SYSTEM MASTER CODE
l. Press#
m. Enter the new four digit MASTER CODE
n. Press#
o. Press * until it says USER CODES again
p. Press the up arrow or A button until it says EXIT PROGRAMMING READY
q. Press#
The manufacturer of your security system recommends that you test it weekly to
ensure that the system is communicating fully with the Monitoring Station in the event
that an alarm is triggered. If for any reason you feel your security system is not
functioning properly, do not hesitate to call our office at 770-963-0305. We have
technicians available to assist you twenty-four hours per day.
This manual suits for next models
1
Table of contents
Other GE Security System manuals
GE
GE JSC1300 User manual
GE
GE SmartCom CC-SCRS01 User manual
GE
GE Security Pro 1000 User manual
GE
GE Telligence Patient-Staff Communications... User manual
GE
GE 600-1021-95R User manual
GE
GE 610 User manual
GE
GE Concord 4 Instruction manual
GE
GE Security Pro 500 User manual
GE
GE INT-22.5R1-24 User manual
GE
GE Concord express User manual
Popular Security System manuals by other brands
EDM
EDM Solution 6+6 Wireless-AE installation manual
Highway Safety Group
Highway Safety Group EA401 user manual
Siren
Siren LED GSM operating manual
Detection Systems
Detection Systems 7090i Installation and programming manual
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 instructions
Siemens
Siemens FDM273 manual