Festo SPC11 Series Instructions and recipes

Supplementary

manual

Drive-specific

supplement for

operating the

SPC11withdrive

type DGP(I)(L)-...

Manual

196 730

en 0012NH

[647 464]

SPC11 Soft Stop

Contents and general instructions

Festo P.BE-SPC11-DGP-EN en 0012NH

Author S. Breuer..................................

Editors H.-J. Drung, M. Holder........................

Original de.......................................

Translation transline Deutschland.....................

Layout Festo AG & Co., Dept. KG-GD...................

Type setting KI-TD..................................

Edition en 0012NH.................................

Title MANUAL-EN..................................

Designation P.BE-SPC11-DGP-EN.....................

Order no. 196 730.................................

E(Festo AG & Co., D-73726 Esslingen, Federal Republic of

Germany, 2000)

Internet: http://www.festo.com

E-mail: service_international@festo.com

The copying, distribution and utilization of this document as

well as the communication of its contents to others without

expressed authorization is prohibited. Offenders will be held

ticular the right to carry out patent, utility model or orna-

mental design registration.

Contents and general instructions

II Festo P.BE-SPC11-DGP-EN en 0012NH

Trade marks

Temposonics®is a registered trade mark of MTS Sensortechnologie

GmbH & Co

Contents and general instructions

III

Festo P.BE-SPC11-DGP-EN en 0012NH

Contents

Intended use V..........................................................

Service VI...............................................................

Target group VI..........................................................

Important user instructions VII..............................................

Product-specific terms and abbreviations IX...................................

Notesontheuseofthismanual X...........................................

1. Summary of components 1-1........................................

1.1 General instructions 1-3.............................................

1.2 System structure with the DGP(I)(L)-... 1-4..............................

1.3 Notes on installing the pneumatic components 1-5.......................

1.4 Notes on converting systems 1-16.....................................

1.5 Notes on installing the electronic components 1-19.......................

2. Parameters of the SPC11 for the DGP(I)(L)-... 2-1.......................

2.1 Parameters of the SPC11 2-3.........................................

2.2 Setting the parameters 2-5..........................................

2.3 Parameters for the DGP(I)(L)-.. in horizontal operation 2-8.................

2.3.1 DGP(I)(L)-25-... in horizontal operation 2-8..............................

2.3.2 DGP(I)(L)-32-... in horizontal operation 2-12..............................

2.3.3 DGP(I)(L)-40-... in horizontal operation 2-16..............................

2.3.4 DGP(I)(L)-50-... in horizontal operation 2-20..............................

2.3.5 DGP(I)(L)-63-... in horizontal operation 2-24..............................

2.4 Parameters for the DGP(I)(L)-.. in vertical operation 2-28...................

2.4.1 DGP(I)(L)-25-... in horizontal operation 2-28..............................

2.4.2 DGP(I)(L)-32-... in vertical operation 2-32................................

2.4.3 DGP(I)(L)-40-... in vertical operation 2-36................................

2.4.4 DGP(I)(L)-50-... in vertical operation 2-40................................

2.4.5 DGP(I)(L)-63-... in vertical operation 2-44................................

Contents and general instructions

IV Festo P.BE-SPC11-DGP-EN en 0012NH

A. Technical appendix A-1.............................................

A.1 Repetition accuracy A-3.............................................

A.2 Index A-5.........................................................

Contents and general instructions

Festo P.BE-SPC11-DGP-EN en 0012NH

Intended use

The SPC11 has been designed for fitting into a machine or an

automation device. In conjunction with permitted drives and

measuring systems and a proportional directional control

valve type MPYE-5-..., the SPC11 enables:

– fast movement into the mechanical end positions and one

or two selectable mid-positions

– manual movement between the end positions.

Depending on the drive used, fixed stops are in some cases

required for protecting the drive. The end positions can be

set with fixed stops. The end position cushioning, movement

into the intermediate positions and manual movement are

controlled electronically. The SPC11 must only be used as

follows:

–asintended

– in original condition

– without any modifications

– in faultless technical condition

– only in conjunction with permitted drives/measuring

system combinations.

If used in conjunction with additional commercially-available

components, such as sensors and actuators, the specific

maximum values for pressures, temperatures, electrical data,

torques, etc. must be observed. Please observe also national

and local laws and regulations.

Contents and general instructions

VI Festo P.BE-SPC11-DGP-EN en 0012NH

Service

If you have any technical problems, please contact your local

Festo Service.

Target group

This manual is intended exclusively for personnel trained in

control and automation technology.

Contents and general instructions

VII

Festo P.BE-SPC11-DGP-EN en 0012NH

Important user instructions

Danger categories

This manual contains instructions on the possible dangers

which may occur if the product is not used correctly. These

instructions are marked (Warning, Caution, etc), printed on a

shaded background and marked additionally with a picto-

gram. A distinction is made between the following danger

warnings:

Warning

This means that failure to observe this instruction may

result in serious personal injury or damage to property.

Caution

This means that failure to observe this instruction may

result in personal injury or damage to property.

Please note

This means that failure to observe this instruction may

result in damage to property.

The following pictogram marks passages in the text which

describe activities with electrostatically sensitive compo-

nents.

Electrostatically sensitive components may be damaged if

they are not handled correctly.

Contents and general instructions

VIII Festo P.BE-SPC11-DGP-EN en 0012NH

Marking special information

The following pictograms mark passages in the text contain-

ing special information.

Pictograms

Information:

Recommendations, tips and references to other sources of

information.

Accessories:

Information on necessary or sensible accessories for the

Festo product.

Environment:

Information on environment-friendly use of Festo products.

Text markings

SThe bullet indicates activities which may be carried out in

any order.

1. Figures denote activities which must be carried out in the

numerical order specified.

– Hyphens indicate general activities.

Other manuals for SPC11 Series

Table of contents

Other Festo Controllers manuals

Festo

Festo SPC10-POT 2 Series User manual

Festo

Festo CPX-E-CEC Series User manual

Festo

Festo CPX-E-CEC-***-PN Series User manual

Festo

Festo LRP-1/4 Series User manual

Festo

Festo CMXR-C2 Instruction Manual

Festo

Festo SLS-6-Series-P-A User manual

Festo

Festo CMMD-AS series User manual

Festo

Festo DFPI-ND2P Series Setup guide

Festo

Festo CMMS-ST-C8-7-G2 User manual

Festo

Festo FEC FC20 User manual

Festo

Festo ELGS-TB User manual

Festo

Festo CPX-E-CEC EP Series User manual

Festo

Festo DFPD-Series Setup guide

Festo

Festo VMPA-B8-R Series User manual

Festo

Festo CMXR-C2 Guide

Festo

Festo CMMS-ST-*-G2 Series Instruction Manual

Festo

Festo CMMB-AS-0x User manual

Festo

Festo VPPM-**C1 Series User manual

Festo

Festo CMMP-AS-***-M0 Series Operating and installation instructions

Festo

Festo VPPM-6TA-L-1-F-0L10H User manual

Festo

Festo SPC200 Series User manual

Festo

Festo CPS-Gate User manual

Festo

Festo ELGE-TB User manual

Festo

Festo VPPM-...TA-L Series User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual