ETC Echo User manual

ETC Installation Guide

Echo Inspire Station

Corpora te He a dqua rte rs nMiddleton, WI, USA |+1 608 831 4116

Globa l Offic es nLondon, UK |Rome, IT |Holzkirchen, DE |Paris, FR |Hong Kong

We b etcconnect.com |Support support.etcconnect.com

Trademark and patent info: etcconnect.com/ip |Product information and specifications

subject to change. ETCintends this document to be provided in its entirety.

7186M2140 Rev F Released 2021-06

Overview

Echo Inspire Stations provide preset, zone, space combine, and color controls

for use with Echo and Sensor control systems.

Reference the ETC website at etcconnect.com for related Inspire station

documentation including the datasheet, which provides a complete listing of

station types.

Stations are available in 1, 2, 4, 6, and 8–button assemblies and a 4–button

with fader station. Station buttons are backlit by both blue and amber LEDs.

The 4–button with fader station knob is backlit with a blue LED.

This document guides you through the installation and local DIP switch setup

of the Inspire Station. For more detailed information about local

configuration options available for the Inspire Station, reference the

Echo

Inspire Station Programming Guide

Custom Configuration

For information about the custom configuration options available for the

Inspire Station using EchoAccess, reference the EchoAccess Mobile App

integrated help system. User documentation is available for download on our

website etcconnect.com.

Note:

To configure the Inspire Station using EchoAccess, the station

Function switch must be set to Custom.

ETC Installation Guide

Echo Inspire Station

Prepare for Installation

Inspire Stations ship with station electronics, a decorator-style wall plate,

termination kit, and a template of standard button labels. You can install the

station into an industry-standard back box (provided by others) or a surface-

mounted back box (sold separately and available from ETC).

Inspire stations connect to the EchoConnect station communication bus.

EchoConnect is a bi-directional protocol that uses one pair of wires (data+

and data-) for both data and power. ETC recommends using Belden 8471

Class 2 wire (or approved equal – see the ETC cable cross database

etcconnect.com/Support/Cable-Cross-Database for equal alternatives). The

total combined length of an EchoConnect wire run using Belden 8471 may

not exceed 500m (1,640ft), with a maximum distance of 400m(1,312ft)

between any two devices.

Note:

All control wiring should be installed and terminated by a

qualified installer and should follow standard wiring installation

practices. Leave approximately 25.4cm (10in) of wiring in the back

box for connection and to allow slack for future service needs.

Note:

ETC requires that all stations and devices be grounded for

ESDprotection. Pull an additional 2.5 mm2(14AWG) wire for

grounding when control wires are not installed in grounded metal

conduit.

Environmental

Indoor installation only, 0–50°C (32–122°F), 5–95% non-condensing

humidity.

Installation

Installation should follow all local codes and standard electrical practices.

Note:

NEC Class 2 product to be wired in accordance to NEC Article

725 and local jurisdiction requirements.

The back box should be installed plum and square for best results. Ensure

that the back box is clean and free of obstructions and that all wiring is

installed correctly.

Inspire stations ship with a termination kit for use with Belden 8471 (or

equivalent wire) and contains a power pigtail, a ground wire pigtail, spacers,

and all required wire termination connectors for installation.

Echo Inspire Station Page 2 of 8 ETC

ETC Installation Guide

Echo Inspire Station

Note:

When using Category 5 (or equivalent) cable on the

EchoConnect communication bus, please note the following:

•

Cat5 wiring must be terminated using EchoConnect Cat5

Termination Kit and must be installed using a bus topology.

Refer to the installation guide that is provided with the Cat5

Termination Kit (7186A1207) for information to terminate

Cat5 wiring.

•

Not all topologies are supported using Cat5; careful planning

is required to ensure the proper termination kits are available

and the wire is pulled appropriately.

Connect Wiring

1. Pull all required wiring (data+, data-) into the back box. As needed,

pull an additional ESD ground wire (required only when the station is

not installed in grounded metal conduit).

2. Connect the station ESD ground wire pigtail.

a. Strip 11mm (7/16in) of insulation from the ends of the station

ground wire pigtail, provided in the termination kit, and the

incoming ground wire.

b. Use one WAGO connector, provided in the termination kit, to

connect the station ESD ground pigtail and the incoming ground.

For stations using grounded metal conduit, connect the ground

pigtail to the metal back box ground location.

c. Install the ESD ground wire pigtail FASTON connector to the

mating receptacle on the station electronics.

3. Terminate EchoConnect wires. EchoConnect is topology free; you may

install the wires in any combination of bus, star, loop, or home-run.

a. Strip 11mm (7/16in) from the ends of each power pigtail wire

provided in the termination kit and the installed control wires.

b. Use the provided WAGO connectors to connect the power pigtail

wires and the installed Belden 8471 control wires. One WAGO

should be used for the white wire pair (data +) and one for the

black wire pair (data -). Open the terminal levers on the WAGO

connector and insert the installed Belden 8471 wire and the lead

from the power pigtail into the terminals, and then close the

levers.

c. Install the two-pin connector from the power pigtail to the

mating receptacle on the station electronics.

Echo Inspire Station Page 3 of 8 ETC

ETC Installation Guide

Echo Inspire Station

Rotary and DIP Switches

Rotary and DIP switch settings are accessible

on the rear of the station.

Set Space and Address

Two rotary switches on the rear panel of the

station provide for space assignment and

station address assignment. Each station

must be set to a unique station address for

the assigned space.

By default, these switches are set to Space1, Station Address1. Station

commands are shared by all devices within an assigned space.

DIP Switch Settings

DIP switches on the rear panel of the station provide for designation of "Off"

functionality, the ability to disable amber button LEDs, 4-button station space

combine controls, 4-button with fader station color control mode settings,

and the ability to restore the station to its factory defaults.

Switch# Use

Use Off – Provides "Use Off" functionality, or:

1-button station only: When set to On and the Function switch is set to Preset

mode, enables sequence toggle.

Amber LED Disable – Provides the ability to disable use of the amber LEDs. When

this switch is set to On, the amber button LEDs on the station are disabled. The

default setting is Off, enabling amber LEDs. (Amber LEDs is provided as the default

so the station glows in darkened spaces, allowing it to be easily located.)

3Space Combine Mode – 4-button station only. Changes the station personality,

enabling space combine.

4Fade Time Override (Disable) – Applies a 0-second fade time to all station actions

for non-dim switched mode behavior (when dimming features are not wanted).

5Zone Color Control – 4-button with fader station only. Changes the Zone

mode (function selection switch) of the station to Color Control mode. See

page

7 Reserved for future development.

8Restore to Defaults at boot. Setting this DIP switch and cycling power to the

station restores the station to factory defaults

Echo Inspire Station Page 4 of 8 ETC

ETC Installation Guide

Echo Inspire Station

Note:

When the station Function switch is set to Custom, only DIP

switch number 8 applies. All other DIP switch settings are ignored.

Reference the Echo Inspire Station Programming Guide (available for

download from etcconnect.com) for details on use of the Function

selection switch.

4-button with Fader Station Color Mode DIP Switch Settings

DIP switches 5 and 6 on the 4-button with fader station set Color Mode

functionality for the fader knob when the station is also set to Zone control

mode.

Mode DIP 5 DIP 6 Push Action Rotate Action

Intensity Off Off Selection Toggle Selection Raise / Lower

Color

Temp Off On Toggle between Intensity and

Color Temp

Selection Raise / Lower for Intensity

and Color Temp

HSI Color On Off Toggle between Intensity,

Saturation, and Hue

Selection Raise / Lower for Intensity,

Saturation, and Hue

Studio On On Toggle between Intensity,

Color Temp, and Tint

Selection Raise / Lower for Intensity,

Color Temp, and Tint

Station Configuration

RECORD/

PROGRAM

MODE

Function switch

PRESET

CUSTOM

ZONE

The Inspire Station has on-board

switch and button settings that are

available from the front of the

station when it is installed and the

cover is removed.

Reference the

Echo Inspire Station

Programming Guide

for information

about local settings on your Inspire

Station, including configuration,

program and record mode, and

station functionality. ETC user

documentation is available for free

download from our website etcconnect.com. Reference the EchoAccess

Mobile App integrated help system for details about custom configuration

using EchoAccess.

Echo Inspire Station Page 5 of 8 ETC

ETC Installation Guide

Echo Inspire Station

Install Button Legends

Inspire Stations ship with standard button legends installed beneath a clear

lens. An additional sheet of standard button legends are provided for field

installation as needed.

Note:

Customize and print your own button legends on standard

transparency. Download the button legend template provided on the

ETC website etcconnect.com.

Each button can have a legend, installed beneath the button lens. To remove,

install, or replace a button legend you must first remove the bezel and button

lens from the station electronics.

1. Remove the bezel from the

station electronics.

Each corner of the bezel is

provided with a notch to assist

with bezel removal. Use your

thumbnail to lift a corner free,

and then gently remove the

bezel from the station.

2. Remove the button lens.

Using the pads of your thumbs, press on

the lens and slide the lens either left or

right, toward the button hinge points.

3. Once the lens is removed, remove the

existing legend and replace it with

another standard legend as provided with

this station, or insert a custom legend.

4. Reattach the lens onto the button

by first aligning the grooves of

the lens to the button, then

sliding the lens in place starting

at the hinge. Slide the lens until it

covers the entire button and clicks

into place.

5. Replace the bezel when all

legends and lenses are in place.

Echo Inspire Station Page 6 of 8 ETC

ETC Installation Guide

Echo Inspire Station

Install the Station into the Back Box

Receptacle spacers are provided to help align the station and cover flush

against the wall in flush- mount applications. The spacers are not required

when installing the station into a surface-mount back box.

1. Insert the station electronics and wiring into the back box. To install

multiple stations (multi-gang), insert the station electronics into the

back box from the right to the left side for the best alignment and fit.

The alignment bracket will slightly overlap the station to the right

when properly installed.

2. Use spacers as needed to provide a flush-mounted station.

a. Fold the spacer in a zig-zag fashion and press the stack together

to achieve the thickness needed to fill the gap between the

station, wall surface, and the back box.

b. Cut off and discard the excess.

c. Place the stack between the station electronics and the flush-

mounted back box.

3. Secure each station electronics in place using the two screws provided.

If using spacers, insert the screws through the spacers as well.

Note:

To ensure successful station and wall plate installation, do not

over tighten the screws. If screws are over tightened, button activation

can be negatively impacted.

Echo Inspire Station Page 7 of 8 ETC

ETC Installation Guide

Echo Inspire Station

Install the Wall Plate

The wall plate is secured to the station with built-in magnets.

1. Align the top of the wall plate to the station and

angle the bottom approximately 20 degrees.

2. Hook the top of the wall plate to the tabs located

on the station electronics assembly. To ensure the

wall plate is hooked properly on the top hook,

wiggle it slightly side to side.

3. Swing the bottom of the wall plate down until the

magnets engage.

4. If the wall plate does not fully attach automatically,

wiggle the bottom of the plate until all of the

magnets are seated properly to the station and the

plate is secure.

Note:

If you are installing a multi-gang wall plate and the stations

are misaligned in the back box, the wall plate will not attach properly.

Loosen the screws that secure the station to the back box, adjust each

station to improve the alignment, secure the screws, and then install

the wall plate again.

Echo Inspire Station Page 8 of 8 ETC

Table of contents

Other ETC Lighting Equipment manuals

ETC

ETC CE Source Four User manual

ETC

ETC GDS CueSystem User manual

ETC

ETC Expression 2.0 User manual

ETC

ETC fos/4 Series User manual

ETC

ETC Source Four LED Series User manual

ETC

ETC Source Four Mini CE User manual

ETC

ETC Source Four LED Series Installation guide

ETC

ETC Source 4WRD II User manual

ETC

ETC F-Drive W1 Series User manual

ETC

ETC ColorSource Spot jr v2.0 User manual

ETC

ETC Source Four LED Series User manual

ETC

ETC HIGH END SYSTEMS SolaPix 37 User manual

ETC

ETC fos/4 Fresnel User manual

ETC

ETC Desire D40XTI User manual

ETC

ETC Desire D22 User manual

ETC

ETC HIGH END SYSTEMS LONESTAR User manual

ETC

ETC fos/4 Series User manual

ETC

ETC Source Four Mini LED User manual

ETC

ETC ColorSource Spot VXT User manual

ETC

ETC High End Systems SolaPix 19 User manual

ETC

ETC Source 4WRD User manual

ETC

ETC Source Four LED Series User manual

ETC

ETC Desire Fresnel User manual

ETC

ETC Irideon WLZ User manual

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions