Endress+Hauser Turbimax CUS52D User manual

Products Solutions Services

Operating Instructions

Turbimax CUS52D

Turbidity sensor

BA01275C/07/EN/06.20

71473306

2020-03-16

Turbimax CUS52D Table of contents

Endress+Hauser 3

Table of contents

1 About this document ................ 4

1.1 Warnings ............................ 4

1.2 Symbols used .......................... 4

1.3 Symbols on the device ................... 4

2 Basic safety instructions ............ 5

2.1 Requirements for personnel ............... 5

2.2 Designated use ........................ 5

2.3 Workplace safety ....................... 5

2.4 Operational safety ...................... 6

2.5 Product safety ......................... 6

3 Product description ................. 7

3.1 Product design ......................... 7

4 Incoming acceptance and product

identification ....................... 8

4.1 Incoming acceptance .................... 8

4.2 Product identification .................... 8

4.3 Scope of delivery ....................... 9

4.4 Certificates and approvals ................ 9

5 Installation ....................... 10

5.1 Installation conditions .................. 10

5.2 Mounting the sensor ................... 15

5.3 Post-installation check .................. 20

6 Electrical connection .............. 21

6.1 Connecting the sensor .................. 21

6.2 Ensuring the degree of protection .......... 22

6.3 Post-connection check .................. 22

7 Commissioning .................... 23

7.1 Function check ....................... 23

8 Operation ......................... 24

8.1 Adapting the measuring device to the process

conditions ........................... 24

9 Diagnostics and troubleshooting ... 35

9.1 General troubleshooting ................. 35

10 Maintenance ...................... 36

10.1 Maintenance tasks ..................... 36

11 Repair ............................ 37

11.1 General information ................... 37

11.2 Spare parts .......................... 37

11.3 Return .............................. 37

11.4 Disposal ............................ 37

12 Accessories ....................... 38

12.1 Assemblies .......................... 38

12.2 Holder .............................. 39

12.3 Mounting material ..................... 39

12.4 Compressed air cleaning ................ 39

12.5 Ultrasonic cleaning .................... 40

12.6 Bubble trap .......................... 40

12.7 Solid state reference ................... 41

12.8 Calibration vessel ...................... 41

13 Technical data .................... 42

13.1 Input ............................... 42

13.2 Performance characteristics .............. 42

13.3 Environment ......................... 43

13.4 Process ............................. 43

13.5 Mechanical construction ................ 44

Index .................................. 45

About this document Turbimax CUS52D

4 Endress+Hauser

1 About this document

1.1 Warnings

Structure of information Meaning

LDANGER

Causes (/consequences)

If necessary, Consequences of

non-compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation will result in a fatal or serious

injury.

LWARNING

Causes (/consequences)

If necessary, Consequences of

non-compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation can result in a fatal or serious

injury.

LCAUTION

Causes (/consequences)

If necessary, Consequences of

non-compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid this situation can result in minor or more serious injuries.

NOTICE

Cause/situation

If necessary, Consequences of

non-compliance (if applicable)

‣Action/note

This symbol alerts you to situations which may result in damage to

property.

1.2 Symbols used

Symbol Meaning

Additional information, tips

Permitted or recommended

Not permitted or not recommended

Reference to device documentation

Reference to page

Reference to graphic

 Result of a step

1.3 Symbols on the device

Symbol Meaning

Reference to device documentation

Turbimax CUS52D Basic safety instructions

Endress+Hauser 5

2 Basic safety instructions

2.1 Requirements for personnel

• Installation, commissioning, operation and maintenance of the measuring system may

be carried out only by specially trained technical personnel.

• The technical personnel must be authorized by the plant operator to carry out the

specified activities.

• The electrical connection may be performed only by an electrical technician.

• The technical personnel must have read and understood these Operating Instructions

and must follow the instructions contained therein.

• Faults at the measuring point may only be rectified by authorized and specially trained

personnel.

Repairs not described in the Operating Instructions provided must be carried out only

directly at the manufacturer's site or by the service organization.

2.2 Designated use

CUS52D is a sensor for measuring turbidity and low solids content in drinking water and

process water applications.

The sensor is particularly suited for use in the following applications:

• Final turbidity measurement in outlet of waterworks

• Turbidity measurement in inlet of waterworks

• Turbidity measurement at all process stages

• Turbidity measurement for filter monitoring and filter backwashing

• Turbidity measurement in drinking water networks

• Turbidity measurement in media with high salinity (plastic sensor only)

Use of the device for any purpose other than that described, poses a threat to the safety of

people and of the entire measuring system and is therefore not permitted.

The manufacturer is not liable for damage caused by improper or non-designated use.

2.3 Workplace safety

As the user, you are responsible for complying with the following safety conditions:

• Installation guidelines

• Local standards and regulations

Electromagnetic compatibility

• The product has been tested for electromagnetic compatibility in accordance with the

applicable international standards for industrial applications.

• The electromagnetic compatibility indicated applies only to a product that has been

connected in accordance with these Operating Instructions.

Basic safety instructions Turbimax CUS52D

6 Endress+Hauser

2.4 Operational safety

Before commissioning the entire measuring point:

1. Verify that all connections are correct.

2. Ensure that electrical cables and hose connections are undamaged.

3. Do not operate damaged products, and protect them against unintentional operation.

4. Label damaged products as defective.

During operation:

‣If faults cannot be rectified:

products must be taken out of service and protected against unintentional operation.

2.5 Product safety

2.5.1 State-of-the-art technology

The product is designed to meet state-of-the-art safety requirements, has been tested, and

left the factory in a condition in which it is safe to operate. The relevant regulations and

international standards have been observed.

Turbimax CUS52D Product description

Endress+Hauser 7

3 Product description

3.1 Product design

The sensor with the 40 mm (1.57 in) diameter can be operated directly and completely in

the process without the need for further sampling (in-situ).

The sensor includes all necessary modules:

• Power supply

• Light sources

• Detectors

Detectors record the measuring signals, digitize them and process them into a measured

value.

• Sensor microcontroller

This is responsible for controlling internal processes and transmitting data.

All data - including the calibration data - are stored in the sensor. The sensor can be

precalibrated and used at a measuring point, calibrated externally, or used for several

measuring points with different calibrations.

A0030692

 1 Arrangement of light source and light receiver

1 Light receiver

2 Light source

3.1.1 Measuring principle

The sensor works using the 90° light scattering principle in accordance with ISO 7027 and

meets all the requirements of this standard (no divergence and a maximum convergence

of 1.5°). The ISO 7027 standard is obligatory for turbidity measurements in the drinking

water sector.

90° ± 2.5°

20° - 30°

A0030701

 2 Measurement in accordance with ISO 7027

Measurement is done using a wavelength of 860 nm.

Incoming acceptance and product identification Turbimax CUS52D

8 Endress+Hauser

4 Incoming acceptance and product

identification

4.1 Incoming acceptance

1. Verify that the packaging is undamaged.

 Notify the supplier of any damage to the packaging.

Keep the damaged packaging until the issue has been resolved.

2. Verify that the contents are undamaged.

 Notify the supplier of any damage to the delivery contents.

Keep the damaged goods until the issue has been resolved.

3. Check that the delivery is complete and nothing is missing.

 Compare the shipping documents with your order.

4. Pack the product for storage and transportation in such a way that it is protected

against impact and moisture.

 The original packaging offers the best protection.

Make sure to comply with the permitted ambient conditions.

If you have any questions, please contact your supplier or your local Sales Center.

4.2 Product identification

4.2.1 Nameplate

The nameplate provides you with the following information on your device:

• Manufacturer identification

• Order code

• Extended order code

• Serial number

• Safety information and warnings

‣Compare the information on the nameplate with the order.

4.2.2 Product identification

The order code and serial number of your product can be found in the following locations:

• On the nameplate

• In the delivery papers

Obtaining information on the product

1. Go to www.endress.com.

2. Call up the site search (magnifying glass).

3. Enter a valid serial number.

4. Search.

 The product structure is displayed in a popup window.

5. Click on the product image in the popup window.

 A new window (Device Viewer) opens. All of the information relating to your

device is displayed in this window as well as the product documentation.

Turbimax CUS52D Incoming acceptance and product identification

Endress+Hauser 9

4.2.3 Manufacturer's address

Endress+Hauser Conducta GmbH+Co. KG

Dieselstraße 24

D-70839 Gerlingen

4.3 Scope of delivery

The delivery comprises:

• 1 sensor, version as ordered

• 1 Operating Instructions BA01275C

4.4 Certificates and approvals

4.4.1 Electromagnetic compatibility

Interference emission and interference immunity as per

• EN 61326-1:2013

• EN 61326-2-3:2013

• NAMUR NE21: 2012

4.4.2  mark

The product meets the requirements of the harmonized European standards. As such, it

complies with the legal specifications of the EU directives. The manufacturer confirms

successful testing of the product by affixing to it the  mark.

4.4.3 ISO 7027

The measurement method used in the sensor corresponds to the nephelometric turbidity

method according to ISO 7027-1:2016.

4.4.4 EAC

The product has been certified according to guidelines TP TC 004/2011 and TP TC

020/2011 which apply in the European Economic Area (EEA). The EAC conformity mark

is affixed to the product.

4.4.5 Marine approvals

A selection of sensors have type approval for marine applications, issued by the following

classification societies: ABS (American Bureau of Shipping), BV (Bureau Veritas), DNV-GL

(Det Norske Veritas-Germanischer Lloyd) and LR (Lloyd’s Register). Details of the order

codes of the approved sensors, and the installation and ambient conditions, are provided in

the relevant certificates for marine applications on the product page on the Internet.

Installation Turbimax CUS52D

10 Endress+Hauser

5 Installation

5.1 Installation conditions

5.1.1 Dimensions

Plastic sensor

Ø 40

(1.57)

NPT ¾“

237.5 (9.35) 82.7 (3.26)

2 (0.08)

20.5 (0.81)

18.5 (0.73) 12.5

(0.49)

13.5

(0.53)

20.5

(0.81)

(0.59)

A0042002

 3 Dimensions of plastic sensor. Dimensions: mm (in)

Table of contents

Other Endress+Hauser Measuring Instrument manuals

Endress+Hauser

Endress+Hauser Liquiphant FTL64 User manual

Endress+Hauser

Endress+Hauser Levelflex FMP56 Manual

Endress+Hauser

Endress+Hauser Micropilot FMR56 User manual

Endress+Hauser

Endress+Hauser Ceraphant T PTC31 User manual

Endress+Hauser

Endress+Hauser Cerabar M PMP51 Manual

Endress+Hauser

Endress+Hauser RMM621 User manual

Endress+Hauser

Endress+Hauser Levelflex FMP50 User manual

Endress+Hauser

Endress+Hauser RID16 Technical specifications

Endress+Hauser

Endress+Hauser Prothermo NMT81 User manual

Endress+Hauser

Endress+Hauser Levelflex FMP56 User manual

Endress+Hauser

Endress+Hauser Solicap M FTI55 Installation instructions

Endress+Hauser

Endress+Hauser Micropilot FMR51 Technical specifications

Endress+Hauser

Endress+Hauser Levelflex FMP50 Installation instructions

Endress+Hauser

Endress+Hauser Cubemass DCI User manual

Endress+Hauser

Endress+Hauser EngyCal RH33 Technical specifications

Endress+Hauser

Endress+Hauser Proline Promag W 800 Technical specifications

Endress+Hauser

Endress+Hauser Proline Promass X 300 PROFINET User manual

Endress+Hauser

Endress+Hauser Liquiline Mobile CML18 User manual

Endress+Hauser

Endress+Hauser Proline Promass 83 Technical specifications

Endress+Hauser

Endress+Hauser Gammapilot M FMG60 Installation instructions

Endress+Hauser

Endress+Hauser Micropilot FMR56 Manual

Endress+Hauser

Endress+Hauser PROline promag 23 User manual

Endress+Hauser

Endress+Hauser Deltabar S FMD77 User manual

Endress+Hauser

Endress+Hauser Proline Promag L 400 Technical specifications

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual

Acterna

Acterna MS1400 Operation manual

R&S

R&S ZPH manual