Endress+Hauser Smartec CLD18 User manual

Products Solutions Services

Operating Instructions

Smartec CLD18

Conductivity measuring system

BA01149C/07/EN/06.17

71393688

AUTHORIZED DISTRIBUTOR:

InstrumentsAndControl.com

Houston, Texas USA

[email protected]

281-609-7170

Smartec CLD18 Table of contents

Endress+Hauser 3

Table of contents

1 Document information ......... 4

1.1 Warnings ........................... 4

1.2 Symbols used ........................ 4

1.3 Symbols on device .................... 5

2 Basic safety instructions ....... 5

2.1 Requirements for the personnel ........ 5

2.2 Designated use ...................... 5

2.3 Occupational safety .................. 5

2.4 Operational safety ................... 7

2.5 Product safety ....................... 7

2.6 IT security .......................... 7

3 Product description ............. 8

3.1 Product design ....................... 8

4 Incoming acceptance and

product identification .......... 9

4.1 Incoming acceptance ................. 9

4.2 Product identification ................. 9

4.3 Scope of delivery .................... 10

4.4 Certificates and approvals ............ 11

5 Installation .................... 11

5.1 Installation conditions ............... 11

5.2 Mounting the compact device ......... 17

5.3 Post-installation check ............... 17

6 Electrical connection .......... 17

6.1 Connecting the transmitter ........... 17

6.2 Ensuring the degree of protection ..... 21

6.3 Post-connection check ............... 21

7 Operation options ............. 22

7.1 Overview of operating options ........ 23

7.2 Structure and function of the operating

menu ............................. 24

8 Commissioning ................ 25

8.1 Switching on the measuring device .... 25

8.2 Display settings (Display menu) ....... 25

8.3 Configuring the measuring device ..... 26

8.4 Advanced settings .................. 26

8.5 Calibration (Calibration menu) ........ 31

9 Diagnostics and

troubleshooting ............... 34

9.1 General troubleshooting ............. 34

9.2 Trouble shooting instructions ......... 34

9.3 Pending diagnostic messages ......... 35

10 Maintenance .................. 38

10.1 Maintenance tasks .................. 38

11 Repairs ......................... 39

11.1 General notes ...................... 39

11.2 Return ............................ 39

11.3 Disposal ........................... 39

12 Accessories .................... 40

12.1 Calibration solutions ................ 40

13 Technical data ................. 40

Index ................................. 47

Document information Smartec CLD18

4 Endress+Hauser

1 Document information

1.1 Warnings

Structure of information Meaning

LDANGER

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation will result in a fatal or serious injury.

LWARNING

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation can result in a fatal or serious injury.

LCAUTION

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid this situation can result in minor or more serious injuries.

NOTICE

Cause/situation

If necessary, Consequences of non-

compliance (if applicable)

‣Action/note

This symbol alerts you to situations which may result in damage to property.

1.2 Symbols used

Symbol Meaning

Additional information, tips

Permitted or recommended

Not permitted or not recommended

Reference to device documentation

Reference to page

Reference to graphic

 Result of a step

Smartec CLD18 Basic safety instructions

Endress+Hauser 5

1.3 Symbols on device

Symbol Meaning

Reference to device documentation

2 Basic safety instructions

2.1 Requirements for the personnel

• Installation, commissioning, operation and maintenance of the measuring system may be

carried out only by specially trained technical personnel.

• The technical personnel must be authorized by the plant operator to carry out the specified

activities.

• The electrical connection may be performed only by an electrical technician.

• The technical personnel must have read and understood these Operating Instructions and

must follow the instructions contained therein.

• Faults at the measuring point may only be rectified by authorized and specially trained

personnel.

Repairs not described in the Operating Instructions provided must be carried out only

directly at the manufacturer's site or by the service organization.

2.2 Designated use

The compact measuring system is used for inductive conductivity measurement in liquids with

medium to high conductivity.

Use of the device for any purpose other than that described, poses a threat to the safety of

people and of the entire measuring system and is therefore not permitted.

The manufacturer is not liable for damage caused by improper or non-designated use.

NOTICE

Applications outside specifications!

Incorrect measurements, malfunctions and even measuring point failure could result

‣Use the product only in accordance with the specifications.

‣Pay attention to the technical data on the nameplate.

2.3 Occupational safety

As the user, you are responsible for complying with the following safety conditions:

• Installation guidelines

• Local standards and regulations

Basic safety instructions Smartec CLD18

6 Endress+Hauser

Electromagnetic compatibility

• The product has been tested for electromagnetic compatibility in accordance with the

applicable European standards for industrial applications.

• The electromagnetic compatibility indicated applies only to a product that has been

connected in accordance with these Operating Instructions.

Smartec CLD18 Basic safety instructions

Endress+Hauser 7

2.4 Operational safety

Before commissioning the entire measuring point:

1. Verify that all connections are correct.

2. Ensure that electrical cables and hose connections are undamaged.

3. Do not operate damaged products, and protect them against unintentional operation.

4. Label damaged products as defective.

During operation:

‣If faults cannot be rectified:

products must be taken out of service and protected against unintentional operation.

2.5 Product safety

The product is designed to meet state-of-the-art safety requirements, has been tested, and

left the factory in a condition in which it is safe to operate. The relevant regulations and

European standards have been observed.

2.6 IT security

We only provide a warranty if the device is installed and used as described in the Operating

Instructions. The device is equipped with security mechanisms to protect it against any

inadvertent changes to the device settings.

IT security measures in line with operators' security standards and designed to provide

additional protection for the device and device data transfer must be implemented by the

operators themselves.

Product description Smartec CLD18

8 Endress+Hauser

3 Product description

3.1 Product design

A0019184

 1 Elements

1 Temperature sensor

2 Process connection

3 Leakage bore (offset by 90° in relation to the flow direction)

4 Removable housing cover

5 Window for display

6 Cable glands (M12)

7 Flow opening of sensor

Smartec CLD18 Incoming acceptance and product identification

Endress+Hauser 9

4 Incoming acceptance and product identification

4.1 Incoming acceptance

1. Verify that the packaging is undamaged.

 Notify the supplier of any damage to the packaging.

Keep the damaged packaging until the issue has been resolved.

2. Verify that the contents are undamaged.

 Notify the supplier of any damage to the delivery contents.

Keep the damaged goods until the issue has been resolved.

3. Check that the delivery is complete and nothing is missing.

 Compare the shipping documents with your order.

4. Pack the product for storage and transportation in such a way that it is protected

against impact and moisture.

 The original packaging offers the best protection.

Make sure to comply with the permitted ambient conditions.

If you have any questions, please contact your supplier or your local Sales Center.

Technical data→  40

4.2 Product identification

4.2.1 Nameplate

The nameplate provides you with the following information on your device:

• Manufacturer identification

• Order code

• Extended order code

• Serial number

• Firmware version

• Ambient and process conditions

• Input and output values

• Measuring range

• Safety information and warnings

• Protection class

‣Compare the information on the nameplate with the order.

Incoming acceptance and product identification Smartec CLD18

10 Endress+Hauser

4.2.2 Product identification

Product page

www.endress.com/CLD18

Interpreting the order code

The order code and serial number of your product can be found in the following locations:

• On the nameplate

• In the delivery papers

Obtaining information on the product

1. Open the product website.

2. At the top of the page, select the link Services.

 An additional sidebar opens up.

3. Select Online Tools followed by Access device specific information.

 An additional window opens.

4. Enter the order code from the nameplate into the search field. Then select Show

details.

 Details of each feature (selected option) of the order code are displayed.

Manufacturer's address

Endress+Hauser Conducta GmbH+Co. KG

Dieselstraße 24

D-70839 Gerlingen

4.3 Scope of delivery

The delivery comprises:

• A Smartec CLD18 measuring system in the version ordered

• Operating Instructions BA01149C/07/EN

Other manuals for Smartec CLD18

Table of contents

Other Endress+Hauser Measuring Instrument manuals

Endress+Hauser

Endress+Hauser LT5 User manual

Endress+Hauser

Endress+Hauser Micropilot FMR10 Manual

Endress+Hauser

Endress+Hauser Proline t-mass 65 User manual

Endress+Hauser

Endress+Hauser analytikjena Biometra TOne User manual

Endress+Hauser

Endress+Hauser PROFIBUS-PA PROline promass 80 Technical specifications

Endress+Hauser

Endress+Hauser Proserve NMS80 Instructions for use

Endress+Hauser

Endress+Hauser Float Tank Gauge LT11 User manual

Endress+Hauser

Endress+Hauser PROline promag 50 w Manual

Endress+Hauser

Endress+Hauser Proline Promass O 300 Manual

Endress+Hauser

Endress+Hauser Proline Prowirl 72 User manual

Endress+Hauser

Endress+Hauser Prosonic M FMU40 User manual

Endress+Hauser

Endress+Hauser Proline Promag 55 User manual

Endress+Hauser

Endress+Hauser StamoSens CNM 750 User manual

Endress+Hauser

Endress+Hauser Cerabar PMP51B User manual

Endress+Hauser

Endress+Hauser HART Proline t-mass I 300 User manual

Endress+Hauser

Endress+Hauser SpectraSensors SS2100 User manual

Endress+Hauser

Endress+Hauser Proline Cubemass C 100 HART User manual

Endress+Hauser

Endress+Hauser HART promass 60 User manual

Endress+Hauser

Endress+Hauser Micropilot FMR53 Manual

Endress+Hauser

Endress+Hauser Proline Promag H 500 User manual

Endress+Hauser

Endress+Hauser Soliwave M FQR50 User manual

Endress+Hauser

Endress+Hauser Proline t-mass 65 PROFIBUS DP User manual

Endress+Hauser

Endress+Hauser Profi Bus Levelflex M FMP40 User manual

Endress+Hauser

Endress+Hauser Micropilot FMR67 Manual

Popular Measuring Instrument manuals by other brands

Suaoki

Suaoki D40 user manual

Elster

Elster BK-G1.6 operating instructions

Duratool

Duratool D03128 manual

Vega

Vega VEGAPULS 65 Quick setup guide

Tonghui

Tonghui TH2618B Operation manual

Tenmars

Tenmars TM-801 user manual

MSR

MSR 145 user manual

TPS

TPS WP-82 manual

ELMETRON

ELMETRON CP-511 user manual

PCB Piezotronics

PCB Piezotronics 003C30 Installation and operating manual

Tenma

Tenma 72-10465 manual

Siemens

Siemens SITRANS F Coriolis FCT030 Function manual

KLINGER

KLINGER CMF V Series instruction manual

EXFO

EXFO FTB-2 Notice

Keysight

Keysight M8290A Getting started guide

ADTEK

ADTEK MW-5 operating manual

Acterna

Acterna MS1400 Operation manual

R&S

R&S ZPH manual