Eaton MFD-TP12 Series Manual
Electric current! Danger to life!
Only skilled or instructed persons may carry out the
following operations. The national regulations/
specifications must be observed for the installation
of the devices.
Lebensgefahr durch elektrischen Strom!
Nur Elektrofachkräfte und elektrotechnisch unterwiesene
Personen dürfen die im Folgenden beschriebenen
Arbeiten ausführen. Die Stromversorgungsgeräte sind
Einbaugeräte. Beachten Sie für die Installation der Geräte
die länderspezifischen Vorschriften.
Tension électrique dangereuse !
Seules les personnes qualifiées et averties doivent
exécuter les travaux ci-après. Les blocs d’alimentation
sont des appareils faisant partie intégrante d’une
installation. Veuillez respecter les normes de mise en
œuvre spécifiques aux différents pays.
¡Corriente eléctrica! ¡Peligro de muerte!
El trabajo a continuación descrito debe ser realizado
por personas cualificadas y advertidas. Las fuentes de
alimentación son aparatos de montaje. Para la
instalación de los aparatos han de tenerse en cuenta
las normativas/especificaciones a nivel local.
Tensione elettrica: Pericolo di morte!
Solo persone abilitate e qualificate possono eseguire le
operazioni di seguito riportate. Gli alimentatori sono
unità per montaggio interno. Per l’installazione degli
apparecchi è necessario rispettare le normative specifiche
di ciascun paese.
en
de
fr
es
it
Emergency On Call Service: Local representative (http://www.eaton.com/moeller/aftersales) or +49 (0) 180 5 223822 (de, en) 1/8
Instruction Leaflet
Montageanweisung
Notice d’installation
Instrucciones de montaje
Istruzioni per il montaggio
11/10 IL05013020Z
(AWA2528-2339)
MFD-TP12…
MFD-TAP13…
AMN05002001Z…
(AWB2528-1480…)
2/8 Emergency On Call Service: Local representative (http://www.eaton.com/moeller/aftersales) or +49 (0) 180 5 223822 (de, en)
11/10 IL05013020Z
Front view – Frontansicht – Face avant – Vista de frente – Vista frontale
aEingänge
bWiderstandssensor Eingänge
cMFD-TAP…
Analog-Ausgang 0 bis 10 V DC/12 Bit
dAusgänge
aEntrées
bEntrées sondes
cMFD-TAP…
Sortie analogique 0 à 10 V DC/12 bits
dSorties
aEntradas
bEntradas sensor de resistencia
cMFD-TAP…
Salida analógica 0 hasta 10 V DC/12 bits
dSalidas
aIngressi
bIngressi sensore resistenza
cMFD-TAP…
Uscita analogica da 0 a 10 V DC/12 bit
dUscite
a
d
bac
I1 I3I4 7 8 9 10 0V QA1I2 5 6 I11 I12 0V
+24V 0V Q1 Q2 Q3Q4
IA01Input 6xDC
Output 4x Transistor/0,5A
00-000000000000
IA02 (0...10V) (0...10V)
Analog
Output
MFD-TAP13-PT-B
aInputs
bResistor sensor inputs
cMFD-TAP…
Analogue output 0 to 10 V DC/12 bits
dOutputs
en
de
fr
es it
Emergency On Call Service: Local representative (http://www.eaton.com/moeller/aftersales) or +49 (0) 180 5 223822 (de, en) 3/8
11/10 IL05013020Z
Menu guide/configuration – Menüführung/Konfiguration – Menus/configuration –
Guía del menú/configuración – Guida menu/configurazione
Configurator
Parameters
NET...
COM...
LINK...
ETHERNET-GW...
IO-MODULE...
TAP13-PT-B
PARAMETERS...
DIAGNOSTICS...
INFORMATION...
SECURITY...
SYSTEM...
MENU LANGUAGE..
CONFIGURATOR...
COMMON...
SENSOR 1...
SENSOR 2...
ANALOG OUT...
TEMP.-RANGE:
0...850 OC
FILTER: 50 HZ
-40...90 OC
0...250 OC
0...400 OC
0...850 OC
-200...200 OC
50 HZ
60 HZ
250 HZ
500 HZ
COMMON...
SENSOR 1...
SENSOR 2...
ANALOG OUT...
SENSOR: ON
OPERAND: IA01
VALUES: 12 BIT
(0..4095)
PT1-FILTER: OFF
CYCLE TIME: OFF
ON
OFF
IA01
MD01 - MD96
12 BIT
0,1 OF
0 OF
0,1 OC
1 OC
ON
OFF
ON
OFF
COMMON...
SENSOR 1...
SENSOR 2...
ANALOG OUT... SENSOR: ON
OPERAND: IA02
VALUES: 12 BIT
(0..4095)
PT1-FILTER: OFF
CYCLE TIME: OFF
ON
OFF
IA02
MD01 - MD96
12 BIT
0,1 OF
0 OF
0,1 OC
1 OC
ON
OFF
ON
OFF
4/8 Emergency On Call Service: Local representative (http://www.eaton.com/moeller/aftersales) or +49 (0) 180 5 223822 (de, en)
11/10 IL05013020Z
Diagnosis
Information
Konfigurator
Parameter
COMMON...
SENSOR 1...
SENSOR 2...
ANALOG OUT... OPERAND: QA01
VALUES: 12 BIT
(0..4095)
QA01
MD01 - MD96
12 BIT
0,1 V
0,01 V
0,001 V
DIAGNOSIS 1...
DIAGNOSIS 2...
SHORT CIRCUIT
WIRE BREAK
LOWER LIMIT
UPPER LIMIT
INFORMATION... TAP12-PT-B
V: 1.00 B: 0031
LAST CYCLE
794 mS
NET...
COM...
LINK...
ETHERNET-GW...
IO-MODULE...
TAP13-PT-B
PARAMETER...
DIAGNOSE...
INFORMATION...
SICHERHEIT...
SYSTEM...
MENUESPRACHE...
KONFIGURATOR...
ALLGEMEIN...
SENSOR 1...
SENSOR 2...
ANALOG OUT...
TEMP.-BEREICH:
0...850 OC
FILTER: 50 HZ
-40...90 OC
0...250 OC
0...400 OC
0...850 OC
-200...200 OC
50 HZ
60 HZ
250 HZ
500 HZ
ALLGEMEIN...
SENSOR 1...
SENSOR 2...
ANALOG OUT...
SENSOR: EIN
OPERAND: IA01
WERTE: 12 BIT
(0..4095)
PT1-FILTER: AUS
ABTASTZEIT: AUS
EIN
AUS
IA01
MD01 - MD96
12 BIT
0,1 OF
0 OF
0,1 OC
1 OC
EIN
AUS
EIN
AUS
Emergency On Call Service: Local representative (http://www.eaton.com/moeller/aftersales) or +49 (0) 180 5 223822 (de, en) 5/8
11/10 IL05013020Z
Diagnose
Information
h
h
ALLGEMEIN...
SENSOR 1...
SENSOR 2...
ANALOG OUT... SENSOR: EIN
OPERAND: IA02
WERTE: 12 BIT
(0..4095)
PT1-FILTER: AUS
ABTASTZEIT: AUS
EIN
AUS
IA02
MD01 - MD96
12 BIT
0,1 OF
0 OF
0,1 OC
1 OC
EIN
AUS
EIN
AUS
ALLGEMEIN...
SENSOR 1...
SENSOR 2...
ANALOG OUT... OPERAND: QA01
WERTE: 12 BIT
(0..4095)
QA01
MD01 - MD96
12 BIT
0,1 V
0,01 V
0,001 V
DIAGNOSE 1...
DIAGNOSE 2...
KURZSCHLUSS
LEITUNGSEINBRUCH
UNTERE GRENZE
OBERE GRENZE
INFORMATION... TAP12-PT-B
V: 1.00 B: 0031
LETZTER ZYKLUS
794 mS
en
ABORT:
NEW PARAMETER...!
ACTIVATE:
OK
ESC
TAP13-PT-B
PARAMETERS...
DIAGNOSTICS...
INFORMATION...
NET...
COM...
LINK...
ETHERNET-GW...
IO-MODULE...
de
NEUE PARAMETER...!
SICHERN:
ABBRECHEN:
OK
ESC
TAP13-PT-B
PARAMETER...
DIAGNOSE...
INFORMATION...
NET...
COM...
LINK...
ETHERNET-GW...
IO-MODULE...
6/8 Emergency On Call Service: Local representative (http://www.eaton.com/moeller/aftersales) or +49 (0) 180 5 223822 (de, en)
11/10 IL05013020Z
Standard connection – Standardanschluss – Raccordement standard –
Conexión estándar – Collegamento standard
Digital inputs, analog inputs, analog output – Digital-Eingänge, Analog-Eingänge, Analog-Ausgang –
Entrées TOR, entrées analogiques, sortie analogique – Entradas digitales, entradas analógicas, salida analógic –
Ingressi digitali, ingressi analogici, uscita analogicaa
MFD-T…-NI(PT)-…
aThree-conductor connection
Dreileiter-Anschluss
Raccordement trois fils
Conexión de tres conductores
Collegamento a tre conduttori
bTwo-conductor connection
Zweileiter-Anschluss
Raccordement deux fils
Conexión de dos conductores
Collegamento a due conduttori
QA= MFD-TAP13-…
MFD-TAP13-PT-A
MFD-TP12-PT-A
-40 °C … +90 °C (-40 °F … +194 °F)
0 °C … +250 °C (+32 °F … +482 °F)
0 °C … +400 °C (+32 °F … +752 °F)
MFD-TAP13-NI-A
MFD-TP12-NI-A
0 °C … +250 °C (+32 °F … +482 °F)
-40 °C … +90 °C (-40 °F … +194 °F)
MFD-TAP13-PT-B
MFD-TP12-PT-B
0 °C … +850 °C‘ (32 °F … +1562 °F)
-200 °C … +200 °C (-328 °F … +392 °F)
L01–
> 1 A
L01+
I1 I3I4 78910 0V QA 1
0V
L02 +
AB
+10 V
10 V
5V
0V0512 1023
0V
I11, I12
~
1 >
15 V
0 <
5 V
1 > 8 V
I5, 6, 7, 8 2.2 mA 24 V
28.8 V
0 < 8 V
I1 – I4 3.3mA 24 V H
0.6 x3.5 x100
U
e
= 24 V H
(20.4 - 28.8 V H)
I
e
= 250 mA
I2 56 I11
I12
0V
ab
Emergency On Call Service: Local representative (http://www.eaton.com/moeller/aftersales) or +49 (0) 180 5 223822 (de, en) 7/8
11/10 IL05013020Z
Transistor outputs – Transistor-Ausgänge – Sorties à transistors – Salidas de transistor – Uscite a transistor
MFD-T…
Protective circuit
Schutzbeschaltung
Circuit de protection
Circuito de protección
Circuito di protezione
MFD-T…, EASY6..-DC-..
0 V H
RL
+... V 0 V Q1 Q2 Q3Q4
S1 S2 S3S4
5 W/24 V H
QQ
24 V H0.5 A0.5 A
+24 V H
f2.5 A
20.4 – 28.8 V H
(20.4 – 28.8 V H)
+ 24 V H
RL
5 W/24 V
0.5 A
24 V H0.5 A
+ 24 V H
Q., S.
Uemax< UZ< 33 V
0 V H
Q., S.
11/10 IL05013020Z
8/8 Emergency On Call Service: Local representative (http://www.eaton.com/moeller/aftersales) or +49 (0) 180 5 223822 (de, en)
Eaton Industries GmbH, Hein-Moeller-Straße 7-11, 53115 Bonn, Germany
© 2006 by Eaton Industries GmbH, www.eaton.com/moeller/support
11/10 IL05013020Z DE13 DHW/Eb
All Rights Reserved. Printed in Germany (11/10)
Short-circuit detection
Kurzschlussauswertung
Analyse du court-circuit
Detección de cortocircuitos
Segnale di cortocircuito
ab c
Power supply of the outputs
Spannungsversorgung der Ausgänge
Alimentation en tension des sorties
Alimentación de tensión de las salidas
Tensione di alimentazione delle uscite
Short-circuit, overload, overtemperature
Kurzschluss, Überlast, Übertemperatur
Court-circuit, surcharge, échauffement
Cortocircuito, sobrecarga, sobretemperatura
Cortocircuito, sovraccarico, sovratemperatura
Fault detection
Fehlererkennung
Détection de défauts
Detección de fallos
Riconoscimento errori
I16 = Q1–Q4
R16 = S1–S4
R15 = S5–S8
a
b
c
This manual suits for next models
7
Other Eaton Control Unit manuals
Eaton
Eaton Series NRX User manual
Eaton
Eaton Powerware Series User manual
Eaton
Eaton Power Xpert C445 Manual
Eaton
Eaton xComfort Room-Manager User manual
Eaton
Eaton CEAG 3-PM-IO Service manual
Eaton
Eaton SmartWire-DT SWD Series User manual
Eaton
Eaton P1 I2 Series Manual
Eaton
Eaton HMIVU04CUNBE Manual
Eaton
Eaton XIOC-NET-DP-M Manual
Eaton
Eaton EOP5T07 User manual
Eaton
Eaton CBEU-02/03 User manual
Eaton
Eaton COOPER POWER SERIES Owner's manual
Eaton
Eaton eNMC2 User manual
Eaton
Eaton NRX Digitrip 1150 Manual
Eaton
Eaton DX-LN1 Series Manual
Eaton
Eaton EC4E-221-6D4T1 Manual
Eaton
Eaton Eaton 5PX Assembly instructions
Eaton
Eaton Vickers DG3V-8 Series User manual
Eaton
Eaton SM65 User manual
Eaton
Eaton 5PX EBM 72V RT2U User manual
Popular Control Unit manuals by other brands
Festo
Festo Compact Performance CP-FB6-E Brief description
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Quick installation guide
JS Automation
JS Automation MPC3034A user manual
JAUDT
JAUDT SW GII 6406 Series Translation of the original operating instructions
Spektrum
Spektrum Air Module System manual
BOC Edwards
BOC Edwards Q Series instruction manual
KHADAS
KHADAS BT Magic quick start
Etherma
Etherma eNEXHO-IL Assembly and operating instructions
PMFoundations
PMFoundations Attenuverter Assembly guide
GEA
GEA VARIVENT Operating instruction
Walther Systemtechnik
Walther Systemtechnik VMS-05 Assembly instructions
Altronix
Altronix LINQ8PD Installation and programming manual
