Eaton ESWV10401 Manual

Effective May 2011

ESWV10401

ESWV10801

Instructional Leaet

IL00412021E

1x4 and 1x8 passive coaxial

distribution module

Product description

The Eaton ESWV10401 and ESWV10801 coaxial

distribution module provides distribution of one

incoming coaxial signal (TV, CATV, modulated

signals) to four or eight locations with four pass-

through connections for SATV. Please be sure

to review this installation guide carefully prior

to installation.

Features

Video distribution

• Distributes one incoming video signal

to four or eight locations

• Four pass-through connections for satellite

TV distribution

• Bi-directional for digital and networking signals

Caution

installation preCautions: never install or

work with video wiring during a lightning

storm. never install telephone jaCks in

wet loCation unless the jaCk is speCifiCally

designed for use in wet loCations. have the

eleCtriCian ConneCt the aC outlet to branCh

CirCuit power. the ConneCtion should be

in aCCordanCe with the national eleCtriCal

Code,TartiCles 110, 250, and 300. never touCh

uninsulated telephone wires or terminals

unless the telephone line has been

disConneCted at the network interfaCe

or demarCation point.

Eaton Corporation

Electrical Sector

1111 Superior Ave.

Cleveland, OH 44114

United States

877-ETN-CARE (877-386-2273)

Eaton.com

Printed in USA

Publication No. IL00412021E / Z10942

May 2011

Eaton is a registered trademark

of Eaton Corporation.

All other trademarks are property

of their respective owners.

Instructional Leaet IL00412021E

Effective May 2011

1x4 and 1x8 passive coaxial

distribution module

Connecting incoming television or cable TV

to the coaxial distribution module

1. Run an RG6 coaxial cable from the video source (antenna or

cable TV D-marc) location to the ESWV10401 or ESWV10801.

2. Connect the RG6 cable to the RF input located on the

rear of the coaxial distribution module (see Figure 1).

3. Connect the RG6 coaxial cable running to the various

room locations to the coaxial connectors on the front

of the module marked Outputs (see Figure 2).

Connecting to satellite signals

1. Run two, three, or four RG6 cables from the satellite dish

to the ESWV10401 or ESWV10801 modules and connect the

cables to the SATV connectors on the rear (see Figure 1).

2. Connect the RG6 cables running to the various satellite

receiver (room) locations to the inputs on the front of the

ESWV10401 or ESWV10801 module (see Figure 2).

Figure 1.

Figure 2.

Input SATV connections

Four pass-through

connections

for SATV

Outputs to

room locations

This manual suits for next models

Table of contents

Other Eaton Control Unit manuals

Eaton

Eaton PKE-SWD-32 Manual

Eaton

Eaton 9395 SSBM User manual

Eaton

Eaton Moeller SmartWire-Darwin EU5C-SWD-DP Manual

Eaton

Eaton DXE-EXT-SET Manual

Eaton

Eaton COOPER POWER SERIES Troubleshooting guide

Eaton

Eaton ELC-AN04ANNN User manual

Eaton

Eaton C441R User manual

Eaton

Eaton EU1E-SWD Series Manual

Eaton

Eaton ELC-CADNET User manual

Eaton

Eaton VICKERS DG3V-10 Series User manual

Eaton

Eaton Power XL SmartWire-DT DX-NET-SWD1 Manual

Eaton

Eaton SmartWire-DT SWD Series User manual

Eaton

Eaton Durant Eclipse Series User manual

Eaton

Eaton ELC-COENETM User manual

Eaton

Eaton DXC-EXT-LOCSIM Manual

Eaton

Eaton xComfort CAEE-02/01 User manual

Eaton

Eaton MMX-COM-PC Manual

Eaton

Eaton HMi VU Series Manual

Eaton

Eaton SL7 Series Manual

Eaton

Eaton EASY205-ASI Manual

Eaton

Eaton Cutler Hammer PanelMate ePro 7685 8 Series User manual

Eaton

Eaton Box 1 Operation and maintenance manual

Eaton

Eaton ELC-COENETM User manual

Eaton

Eaton P1 I2 Series Manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual

Flyron

Flyron FN-BC04 user manual