Eaton ELC-EX08NNSN User manual

IL05003017E.pdf

5011640400-SN00

2005-11-15

ELC-EX08NNSN Switch Type of Digital Extension

Module Instruction Sheet

1 Warning

Carefully read this instruction sheet before operating ELC-EX08NNSN.

ELC-EX08NNSN is an OPEN-TYPE. Please place the module in an enclosure away from airborne dust or high

humidity and prevent electric shock or sudden shock on ELC-EX08NNSN. Also, it is equipped with protective

methods such as some special tool or key to open the enclosure, so as to avoid the hazard to users or any damage

to the module. Do NOT touch terminals when power on.

2 Introduction

1. Thank you for choosing EATON ELC series products. ELC-EX08NNSN shall be used together with ELC SLIM TYPE

with occupying 8 inputs. I/O can be extended up to 128 points including MPU’s. Besides, there are special extension

modules available for up to 8 units connection.

2. Directly execute instructions by switching X0~X7 without external power supply or external wiring for signal

receiving.

3. The module can be used as a digital switch by directly inputting instruction without external wiring to receive signal

that ensures much convenience and safety for end user or for academic use.

 Product Profile:

ELC-EX08NNSN

903

25.2

5.5

1X2

3.4

Unit: mm

1. DIN rail (35mm) 6. Inputs

2. Extension unit/module connection port 7. Fixing clip for extension module

3. Model name 8. Nameplate

4. LED indicators 9. Extension unit/module connector

5. DIN rail clip 10. Aiming pinhole for combining with MPU

IL05003017E.pdf

3 Specification

3.1. Electrical Specification

Model

Items ELC-EX08NNSN

Power voltage 24VDC (-15%~20%) (Power is supplied by the internal bus of MPU)

Consumption power 0.5W

Anti-interference

ability

ESD(IEC 61131-2, IEC 61000-4-2): 8KV Air Discharge

EFT(IEC 61131-2, IEC 61000-4-4): Power Line: 2KV, Digital I/O: 1KV,

Analog & Communication I/O: 1KV

Damped-Oscillatory Wave: Power Line: 1KV, Digital I/O: 1KV

RS(IEC 61131-2, IEC 61000-4-3): 26MHz~1GHz, 10V/m

Operation/Storage Operation : 0℃~55℃(Temperature), 50~95% (Humidity), Pollution degree 2

Storage: -40℃~70℃(Temperature), 5~95% (Humidity)

Vibration/ Shock

resistance International standard: IEC1131-2, IEC 68-2-6（TEST Fc）/ IEC1131-2 & IEC 68-2-27 (TEST Ea)

Weight (g) 60g

4 Installation

1. Use a

screwdriver to

open the side

cover to reveal

the connecting

port.

2. Use a

screwdriver to

lift and

unfasten the

fixing clip.

3. Accurately

connect the

extension

module to the

MPU by using

the pinholes at

each corner.

4. Secure the

extension

module to the

MPU by

pushing down

the fixing clips.

5 Troubleshooting

 Input LED Indicator

The input status can be distinguished by the ON/OFF of the LED. When input is ON, LED will be lit. If error

happens, please check the loops of LED and input signal by using HHP/ELCSoft. Other attention items:

1. Do NOT place ELC-EX08NNSN under direct sunlight and put is away from overheating objects those may

heat up the temperature of the module and result in malfunction.

2. Periodically clean the airborne or conductive dust on the panel.

Other Eaton Control Unit manuals

Eaton

Eaton BreakerVisu NZM-XMC-MDISP35-MOD User manual

Eaton

Eaton Vickers FCGT-02-A-11 Series User manual

Eaton

Eaton COOPER POWER SERIES User manual

Eaton

Eaton PSG480B24RM User manual

Eaton

Eaton Cutler-Hammer Digitrip RMS 610 Manual

Eaton

Eaton mMINT Quick start guide

Eaton

Eaton KES 310+ Manual

Eaton

Eaton SM65 User manual

Eaton

Eaton Crouse-hinds series User manual

Eaton

Eaton XN300 User manual

Eaton

Eaton MN024002EN User manual

Eaton

Eaton Cutler-Hammer PanelMate ePro PS Series User manual

Eaton

Eaton Vickers DG3V-8 Series User manual

Eaton

Eaton Ampgard AR User manual

Eaton

Eaton SL4-FMS Series Manual

Eaton

Eaton OPTCB RS-485 User manual

Eaton

Eaton PKE-SWD-CP Manual

Eaton

Eaton XTPAXENCS65B Manual

Eaton

Eaton PKE-COM-RTU Manual

Eaton

Eaton ESWV10401 Manual

Eaton

Eaton Char-Lynn User manual

Eaton

Eaton ELC-PC12NNDR User manual

Eaton

Eaton ELC-GPXFERMOD User manual

Eaton

Eaton DX-LN1 Series Manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual

Flyron

Flyron FN-BC04 user manual