Eaton NEMA 12 User manual
MN04003011E For more information visit:www.eatonelectrical.com
NEMA 12 Conversion Kit for
9000X Adjustable Frequency Drive
Installation Manual
New Information
January 2004
NEMA 12 Conversion Kit — Installation Manual
MN04003011E For more information visit:
www.eatonelectrical.com
i
January 2004
Important Notice – Please Read
The product discussed in this literature is subject to terms and conditions outlined in Eaton
Electrical Inc. selling policies. The sole source governing the rights and remedies of any
purchaser of this equipment is the relevant Eaton Electrical Inc. selling policy.
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A
PARTICULAR PURPOSE OR MERCHANTABILITY, OR WARRANTIES ARISING FROM COURSE
OF DEALING OR USAGE OF TRADE, ARE MADE REGARDING THE INFORMATION,
RECOMMENDATIONS AND DESCRIPTIONS CONTAINED HEREIN. In no event will Eaton
Electrical Inc. be responsible to the purchaser or user in contract, in tort (including
negligence), strict liability or otherwise for any special, indirect, incidental or consequential
damage or loss whatsoever, including but not limited to damage or loss of use of equipment,
plant or power system, cost of capital, loss of power, additional expenses in the use of
existing power facilities, or claims against the purchaser or user by its customers resulting
from the use of the information, recommendations and descriptions contained herein.
The information contained in this manual is subject to change without notice.
Cover Photo: Cutler-Hammer
®
9000X Drives
NEMA 12 Conversion Kit — Installation Manual
ii
For more information visit:
www.eatonelectrical.com
MN04003011E
January 2004
Table of Contents
SAFETY
Definitions and Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Hazardous High Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
CHAPTER 1 — General
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
CHAPTER 2 — Contents of Kits
OPTN12FR4 (Frame 4) and OPTN12FR5 (Frame 5) . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
OPTN12FR6 (Frame 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
CHAPTER 3 — Installation
Installation Instructions for Frame 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Installation Instructions for Frame 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Installation Instructions for Frame 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
CHAPTER 4 — Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
List of Figures
Figure 2-1: Contents of NEMA Type 12 Kit for
OPTN12FR4 and OPTN12FR5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Figure 2-2: Contents of NEMA Type 12 Kit for
OPTN12FR6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
List of Tables
Table 3-1: Instructions for NEMA Type 12 Kit Installation — Frame 4 . . . . . . . . . 3-1
Table 3-2: Instructions for NEMA Type 12 Kit Installation — Frame 5 . . . . . . . . . 3-4
Table 3-3: Instructions for NEMA Type 12 Kit Installation — Frame 6 . . . . . . . . . 3-7
Table 4-1: NEMA Type 12 Kit — Dimensions and Weight . . . . . . . . . . . . . . . . . . . 4-1
NEMA 12 Conversion Kit — Installation Manual
MN04003011E For more information visit:
www.eatonelectrical.com
iii
January 2004
Safety
Definitions and Symbols
WARNING
This symbol indicates high voltage. It calls your attention to items
or operations that could be dangerous to you and other persons
operating this equipment. Read the message and follow the
instructions carefully.
This symbol is the “Safety Alert Symbol.” It occurs with either of
two signal words: CAUTION or WARNING, as described below.
WARNING
Indicates a potentially hazardous situation which, if not avoided,
can result in serious injury or death.
CAUTION
Indicates a potentially hazardous situation which, if not avoided,
can result in minor to moderate injury, or serious damage to the
product. The situation described in the CAUTION may, if not
avoided, lead to serious results. Important safety measures are
described in CAUTION (as well as WARNING).
Hazardous High Voltage
WARNING
Motor control equipment and electronic controllers are connected
to hazardous line voltages. When servicing drives and electronic
controllers, there may be exposed components with housings or
protrusions at or above line potential. Extreme care should be taken
to protect against shock.
Stand on an insulating pad and make it a habit to use only one
hand when checking components. Always work with another
person in case an emergency occurs. Disconnect power before
checking controllers or performing maintenance. Be sure
equipment is properly grounded. Wear safety glasses whenever
working on electronic controllers or rotating machinery.
WARNING
After disconnecting the utility, wait until the unit cooling fan stops
and the indicators on the control panel are extinguished (if no
keypad is present, check the indicators in the cover). Wait five more
minutes before doing any work on the connections. Do not open
the cover before this time has run out.
NEMA 12 Conversion Kit — Installation Manual
iv
For more information visit:
www.eatonelectrical.com
MN04003011E
January 2004
NEMA 12 Conversion Kit — Installation Manual
MN04003011E For more information visit:
www.eatonelectrical.com
1-1
January 2004
Chapter 1 — General
The NEMA Type 12 Kit is used to convert a Cutler-Hammer
®
9000X drive by Eaton Electrical
®
from a NEMA Type 1 to a NEMA Type 12 enclosure. A NEMA Type 12 enclosure may be
necessary when the adjustable frequency drive is used in ambient conditions that may
contain moisture or dust.
According to standard IEC 60529 (EN 60 529), the NEMA Type 12 adjustable frequency drives
enclosure provides protection against dust and water sprayed from all directions. Limited
ingress of both is permitted.
Note:
A NEMA Type 12 enclosure does not protect the adjustable frequency drive against
strong jets of water or against the effects of immersion.
NEMA 12 Conversion Kit — Installation Manual
1-2
For more information visit:
www.eatonelectrical.com
MN04003011E
January 2004
NEMA 12 Conversion Kit — Installation Manual
MN04003011E For more information visit:
www.eatonelectrical.com
2-1
January 2004
Chapter 2 — Contents of Kits
OPTN12FR4 (Frame 4) and OPTN12FR5 (Frame 5)
The contents of the NEMA Type 12 Kits for Frames 4 and 5 are shown in
Figure 2-1
.
Figure 2-1: Contents of NEMA Type 12 Kit for OPTN12FR4 and OPTN12FR5
1
2
3
Components
1. NEMA 12 Enclosure
2. Removable Conduit Plate
3. NEMA 12 Cable Cover with
Auxiliary Fan
4. Screws (M4x10)
5. Grounding Terminals
6. Screws (M4x8)
7. Screws (M4x16)
8. Caution Label
9. Control Cable Entry Clamps
4
5
6
7
8
9
NEMA 12 Conversion Kit — Installation Manual
2-2
For more information visit:
www.eatonelectrical.com
MN04003011E
January 2004
OPTN12FR6 (Frame 6)
The contents of the NEMA Type 12 Kit for Frame 6 is shown in
Figure 2-2
.
Figure 2-2: Contents of NEMA Type 12 Kit for OPTN12FR6
1
2
3
Components
1. Grounding Terminals
2. Screws, M4x10
3. Grounding Cable Clamps
4. Cable Clamps
5. Screws, M4x16
6. Grounding Screws M5x16
7. Rubber Grommets (sizes vary from class to class)
8. Cable Entry Flange
4
5
6
78
Table of contents
Other Eaton Control Unit manuals
Eaton
Eaton EU1E-SWD Series Manual
Eaton
Eaton ELC-COENETM User manual
Eaton
Eaton Crouse-hinds series User manual
Eaton
Eaton ZB150 Series Manual
Eaton
Eaton Moeller SmartWire-Darwin EU5C-SWD-DP Manual
Eaton
Eaton CI/E-PKZ01-X Series Manual
Eaton
Eaton NRX Digitrip 1150 Manual
Eaton
Eaton Char-Lynn VersaSteer 10 Series Owner's manual
Eaton
Eaton NZM-XSWD-704 Manual
Eaton
Eaton ESWV10401 Manual
Eaton
Eaton XNE-1SWIRE User manual
Eaton
Eaton SL7 Series Manual
Eaton
Eaton COOPER POWER SERIES Troubleshooting guide
Eaton
Eaton xComfort CAEE-02/01 User manual
Eaton
Eaton ELCM Series User manual
Eaton
Eaton EOP5T07 User manual
Eaton
Eaton Power Xpert C445 Manual
Eaton
Eaton XIOC-SER Manual
Eaton
Eaton DILM12-XMSM Manual
Eaton
Eaton Crouse-hinds series User manual
Popular Control Unit manuals by other brands
Festo
Festo Compact Performance CP-FB6-E Brief description
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Quick installation guide
JS Automation
JS Automation MPC3034A user manual
JAUDT
JAUDT SW GII 6406 Series Translation of the original operating instructions
Spektrum
Spektrum Air Module System manual
BOC Edwards
BOC Edwards Q Series instruction manual
KHADAS
KHADAS BT Magic quick start
Etherma
Etherma eNEXHO-IL Assembly and operating instructions
PMFoundations
PMFoundations Attenuverter Assembly guide
GEA
GEA VARIVENT Operating instruction
Walther Systemtechnik
Walther Systemtechnik VMS-05 Assembly instructions
Altronix
Altronix LINQ8PD Installation and programming manual
