DW DWC-D562D User manual
ABOUT MANUAL
Before installing and using the camera, please read this manual carefully.
Be sure to keep it handy for future reference.
960H Indoor Dome Camera
DWC-D562D
DWC-D562DIR
User Manual
11192012
Value
22
PRECAUTIONS
FCC COMPLIANCE
WARNING: Changes or modifications are not expressly approved by the manufacturer.
Do not open or modify.
Do not open the case except during maintenance and installation,
for it may be dangerous and can cause damages.
Do not put objects into the unit.
Keep metal objects and flammable substances from entering the camera.
It can cause fire, short-circuits, or other damages.
Be careful when handling the unit.
To prevent damages, do not drop the camera or subject it to shock or vibration.
Do not install near electric or magnetic fields.
Protect from humidity and dust.
Protect from high temperature.
Be careful when installing near the ceiling of a kitchen or a boiler room,
as the temperature may rise to high levels.
Cleaning: To remove dirt from the case, moisten a soft cloth with a soft detergent solution and wipe.
Mounting Surface: The material of the mounting surface must be strong enough to support the camera.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential environment. This equipment generates, uses,
and radiates radio frequency energy; and if it is not installed and used in accordance with the instruction
manual, it may cause harmful interference to radio communications.
3
Table of Contents
Introduction
Installation
Camera OSD Menu and Glossary
Troubleshooting
Warranty Information
Specifications
Features
Parts and Descriptions
Dimensions
Included Accessories
Easy Installation
Base Installation
Connecting to Monitors
Adjusting the Camera
4
5
6
7
8
9
10
11
13-24
25
26-27
28-29
Adjusting the 3-Axis Gimbal 12
4
FEATURES*
DWC-D562D / DWC-D562DIR
1/3” 960H High Resolution CCD
700 TV Lines
2.8 ~ 11mm Varifocal Auto Iris Lens
Electronic Day and Night
HME (Highlight Masking Exposure)
AGC / SMART BLC / AWB
Night-Up
Mirror Image Control
Programmable Privacy Zones (8) & Motion Detection
Easy Icon Driven OSD Menu with Built-In Joystick
Auto Sensing 12VDC or 24VAC with Line Lock
Secondary Video-BNC Output
Video Test Output Included
85ft Range IR with Intelligent Camera Sync (DWC-D562DIR only)
PARTS & DESCRIPTIONS*
1Lens
4Upper Case
5Dome Cover
2Power Input Connector
12VDC/24VAC Dual Voltage
3Video Output Connector - BNC
6Control Board
7
Power Board
Mounting Screws
9
8
Camera Base
2
6
7
1
8
3
9
4
5
No IR
IR Joystick
10
10
5
DIMENSIONS IN MILLIMETERS (INCHES)*
10.1
(0.4”)
39.4
(1.6”)
82.3
(3.24”)
Ø118.0
(Ø4.65”)
Ø118.0
(Ø4.65”)
Ø89.0
(Ø3.5”)
Ø20.0
(Ø0.79”)
Ø14.5
(Ø0.57”)
3- Ø4.5
(3-Ø0.18”)
6
INSTALLATION*
Included with Value Line Indoor Dome Camera
1. User Manual
2. Mounting Template
1 2
3 4
Ø15.0
Ø20.0
Ø118.0
Ø5.0
Mounting template
PD79
3. Second Video Jack
4. Mounting Screws (3)
7
EASY INSTALLATION*
Remove the Dome Cover
Before you can mount or adjust your Value
Line Indoor Dome Camera, you must remove
the dome cover. Insert a coin or screwdriver
in the slot on the dome cover, then twist to
pry the dome cover from the camera base.
Install the Enclosure Cover
Dome Cover
Camera Base
To install the dome cover, align the dome cover
with the camera base and push until
it securely snaps into place.
58
BASE INSTALLATION*
1. Pull wires through and make connections.
Refer to page 10. Use mounting template to
mount camera with dry wall mounts and wood
screws.
2. Adjust the camera’s 3-Axis Gimbal,
focus, and zoom. See pages 11-12 for
3. Press the joystick button to open the OSD menu.
Push the joystick left, right, up, or down to navigate
the OSD menu. See pages 13~24 for details.
4. Snap the dome cover onto the camera base.
details.
9
CONNECTING TO MONITORS*
No IR
IR
2nd Video Output
CCTV Monitor
Monitor 11.8in
12VDC/24VAC
Right
Left
Up
Down
Power connection - 12VDC/24 VAC Dual Voltage. (Auto polarity detection and protection.)
All cameras are equipped with a second video output on the camera’s Control Board for easy
on-site configuration.
510
This manual suits for next models
1
Table of contents
Other DW Security Camera manuals
DW
DW DWC-MVT4WiA User manual
DW
DW DWC-V6563D User manual
DW
DW DWC-D1362D User manual
DW
DW DWC-MV84WiAC2 User manual
DW
DW DWC-B6763WTIR User manual
DW
DW DWC-MVC8WiATW User manual
DW
DW megaPix DWC-MV950TIR User manual
DW
DW Star-Light Plus DWC-PTZ220XW User manual
DW
DW STAR-LIGHT AHD DWC-V7753WTIR User manual
DW
DW PIXIM DWC-V365D User manual
DW
DW MEGApix DWC-VSBD04Bi User manual
DW
DW DWC-PTZ20X User manual
DW
DW MEGAPIX DWC-MC421D User manual
DW
DW MEGApix DWC-MBH2I4WV User manual
DW
DW DWC-V7253WTIR User manual
DW
DW Snapit DWC-V4363DB User manual
DW
DW DWC-D3763WTIR User manual
DW
DW DWC-V6763TIR User manual
DW
DW DWC-HC421D User manual
DW
DW MEGApix DWC-MB44WiAC6 User manual
