DT Research DT362 Assembly instructions

DT362

ENGLISH

Mobile POS Tablet

BASIC OPERATION GUIDE

DT362

ENGLISH 8

signage dtri com

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131 hp://www.dtresearch.com

DT Research is a registered trademark of DT Research, Inc.

INTRODUCTION

Thank you for acquiring the latest addion to DT Research’s line of tablet devices—the

DT362. Featuring a slim yet robust enclosure, the two-pound DT362 with 8.4”TFT

display is powered by the Intel® Atom™ processor, oﬀering opmal combinaons

of performance and power savings. An external baery expansion opon provides

approximately 3-4 hours of addional baery operaon for up to six hours of mobile

usage.

The DT362 is available in Microso® Windows® Embedded Standard 7, Windows® 7

Professional, Windows® XP Embedded, Windows® XP Pro for Embedded Systems or

Linux operang systems. Each soware operang system features web browser, client/

server compung soware, media player, accessories, and applicaons support.

PACKAGE CONTENTS

One DT362 with Internal Baery Pack (2200mAh), Stylus, Grips and Screen Cover•

AC-DC Power Adapter with Power Cord•

Basic Operaon Guide•

Major opons, depending on conﬁguraon:

* If your DT362 contains MSR, camera or scanner module, please refer to the POS module

operaon guide for detailed operaon.

BOG111312DT362ENG

Desktop Charging Cradle with DC-in•

Power Jack and Ethernet, USB and oponal VGA Ports External Baery Pack•

Internal High Capacity Baery (3760mAh)•External Baery Charger Kit•

SPECIFICATIONS

System

Processor Intel® Atom™ Z530, 1.6GHz

Memory (RAM) 2GB DDR2 533MHZ

Storage 8GB to 256GB Flash

Operang Systems

Microso® Windows® Embedded Standard 7,

Windows® 7 Professional, Windows® XP Embedded,

Windows® XP Pro for Embedded Systems, or Linux

Display 8.4”LED-backlight screen with resisve touch;

sunlight-readable opon

Display Resoluon 800 x 600 (SVGA)

Network Interface Wi-Fi 802.11a/b/g/n, Bluetooth 2.1 with EDR

Control Switch and Buons 1 power buon, 7 front buons and 1 trigger buon

Indicator 1 power/ baery status LED and 1 WLAN acve LED

Speaker Built-in speaker

Input/Output Ports 1 DC-in Jack; 1 USB 2.0 port;

1 Headphone-out Jack; 1 Microphone-in Jack

Security

WPA-Personal, WPA2-Personal, WPA-Enterprise, WPA2-

Enterprise, AES-CCMP 128-bit, WEP 128-bit and 64-bit;

802.1X: EAP-SIM, LEAP, PEAP, TKIP, EAP-FAST, EAPTLS,

EAP-TTLS

Power

AC/DC Adapter Input: 100 – 240V AC; Output: 12V DC, 3A

Baery Pack Internal 7.4V, 2200mAh or 7.4V, 3760mAh/

Oponal: External 7.4V, 3760mAh or 7.2V, 3900mAh

Mechanical

Enclosure ABS + PC plascs and magnesium-aluminum alloy

Stylus Non-electronic p

Protecve Bumpers Rubber side-grips with handstrap

Dimensions (H x W x D) 7.9 x 9.6 x 0.8 in/ 200 x 240 x 18 mm

Weight 1.9 lbs/ 0.86 kg

Environmental

Regulatory FCC Class B, CE, C-Tick, RoHS compliant

Temperature Operaon: 0°C - 40°C; Storage: -20°C - 60°C

Humidity 0% - 90% non-condensing

* Speciﬁcaons subject to change without noce.

DT362

ENGLISH 2

Buon Funcons (with Windows XP Operang System)

BUTTON ACTION

Programmable

Programmable, launch so(on-screen) keyboard (default)

Launch SAS (Secure Aenon Sequence)

Generate Ctrl+Alt+Del keys to invoke the security windows deﬁned under Windows XP

Programmable,

Change display orientaon (portrait/ landscape) (default)

Programmable, system ulity menu (default)

Programmable,

As scanner trigger when equipped with the scanner module

Push/release typically enters Standby mode, or Push/release exits Standby mode or

restarts device (soware dependent)

Push and hold (over 4 seconds) invokes hardware shutdown

The DT362 (with Windows XP)

Baery/Power LED

Wireless LED

Stylus

For locking the MSR module

Buon ManagementWireless Network Sengs

Calibraon

Internal Baery Switch

(back panel)

2 3

Input/ Output Ports

USB Ports

Headphone Jack

Microphone Jack

DC Power Input

1234567

Baery and Power Meter

3ENGLISH

Power/Baery LED Status:

Blue indicates the baery is 25% to 100% charged•

Blinking blue indicates the baery is charging•

Orange indicates that the baery is between 11% to 25%•

Blinking Orange indicates that the baery is below 10%•

Precauons

Always exercise care when operang and handling the DT362.

•

Do NOT apply excessive pressure to the display screen.

•

We recommend using the Stylus provided to keep the screen clean.

•

Avoid prolonged exposure of the display panel to any strong heat source. Wherever

•

possible, the DT362 should face away from direct light to reduce glare.

If the AC-DC power adapter is used to recharge or power the device, do NOT use any

•

AC-DC adapter other than the one provided with the device or acquired from the

manufacturer or its partners.

In the unlikely event that smoke, abnormal noise, or strange odor is present,

•

immediately power oﬀthe DT362 and disconnect all power sources. Report the

problem to your device provider immediately.

Never aempt to disassemble the DT362, as this will void the warranty.

•

THE DT362

Basic Features

The DT362 wireless tablet integrates a bright and responsive touch display, a USB port,

and embedded networking elements such as wireless LAN or oponal 3G. The primary

device is complemented by a suite of accessories, including baery expansion, docking

cradles, and carrying cases, for a comprehensive user experience.

A DT362 typically integrates an 802.11a/b/g/n wireless LAN (WLAN) adapter that may

connect to other wireless devices or access points. If your DT362 does not come with

such a network adapter, please consult your device provider to establish the desired

network connecvity.

DT362

ENGLISH 45ENGLISH

OPERATION

Internal Baery Switch

To prevent baery drain during shipping and extended storage, the internal baery may

be disconnected. To connect the internal baery, push the baery buon switch (on the

back panel) to the “up”posion (see page 2 for photo). The internal baery pack has to

be connected for it to operate, be charged, and for the oponal external baery pack to

funcon.

Powering ON and OFF

To acvate the DT362, push and quickly release the Power Buon. The display will come

on in a few seconds. To put the DT362 in Standby mode, push and quickly release the

Power Buon. To turn the DT362 oﬀfor extended storage, power oﬀthe device safely

using any soware funcon that “shuts down computer”provided in the soware

operang system.

NOTE: The baery packs shipped with your device may be low in power—please use

the AC-DC adapter with the DT362 when seng up the device for the ﬁrst me to

fully charge the internal baery pack. You may charge the external baery pack with it

aached to the DT362, or with the oponal external baery charger kit.

NOTE: When the baery pack(s) is (are) charging, the blue-colored Baery LED should

blink slowly. If plugging in the AC-DC adapter does not trigger this blinking acvity

and the LED stays dark, the baery pack(s) may have been drained substanally. Try

unplugging/ replugging the AC-DC adapter to the DT362 a few mes to acvate the

charging process.

NOTE: To conserve power, use (push and quick release) the Power Buon to put the

device in “Standby”mode while not in use. Pushing brieﬂy on the same buon will wake

up the system within seconds.

NOTE: Avoid using the Power Buon (“hold 4+ seconds”feature) to turn oﬀthe

device—this form of hardware shutdown is intended to be a means of recovery from

device lockups, and not as normal operaon.

Start Up

If the power up (from Standby or otherwise) is successful, the appropriate interface will be

displayed aer a launch sequence of several seconds. The wireless LAN connecon may take

10-15 seconds to be established.

Conﬁguring the DT362

The device may be conﬁgured using the ulies and methods dictated by the soware

operang system. The DT362 should be conﬁgurable for various properes such as user

proﬁles, network features, and several system elements.

Calibraon

The touch display for the DT362 is calibrated before shipping. In the event that the

calibraon has been modiﬁed or is unsasfactory, the respecve calibraon rounes

(e.g., PenMount (PM) for Windows XP) to calibrate the touch interface may be used.

Such applicaons are typically executed through touch input via Stylus or through mouse

click via a USB mouse.

Wireless Networking

Wireless LAN

The DT362 is oen delivered with an embedded (user-inaccessible) 802.11a/b/g/n

WLAN adapter equipped with a hidden custom antenna.

•hrough the support of typical WLAN adapters, the DT362 should be able to detect

all 802.11 access points in the vicinity for you to select the access point of your

choice for connecon.

•he SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT362 and the

access points have to match. The SSID is case-sensive and it is recommended

that you enable WEP/WPA/WPA2 encrypon (or advanced alternaves) for secure

access.

•hen WEP/WPA/WPA2 is enabled, you may need to consult your network admin-

istrator or your networking equipment literature to properly conﬁgure associated

sengs such as Authencaon mode, etc.

•efer to the access point operang manuals for seng up the 802.11 access points.

DT362

ENGLISH 6

Buon Management

Where supported by soware, many of the hard buons on the DT362 are

programmable to perform a funcon of the user’s choice. The excepon is the Power

Buon and the SAS Buon. To acvate the buon re-assignment applicaon, invoke the

Buon Manager applicaon, e.g., in Windows XP Embedded .

Brightness Control

Where supported by device ﬁrmware and soware, a hard buon may be engaged to

manipulate the display brightness. Press the System Menu buon (Buon 7) on the front

of the DT362. The System screen will display a Brightness control secon with up and

down arrows that can be acvated with the stylus.

Baery and Power Management

The DT362 is equipped with an internal 2200mAh Li-Ion baery pack that is capable

of supporng approximately 1.5–2 hours of connuous operaon. With the oponal

internal 3760mAh baery and an external baery pack that clips (hot-pluggable)

onto the back of the device, the maximum period of connuous operaon will be

approximately 3–4 hours. The period between baery recharges can be signiﬁcantly

lengthened by pung the device into Standby mode through the Power Buon (see

Buons Funcon Table) whenever the device is not in use. Depending on the operang

soware, the DT362 may also be conﬁgured to enter various power-saving modes via

the Power Buon or through med entry.

7ENGLISH

Desktop Cradle

The DT362 is complemented by an oponal Desktop Cradle for support, pass-through

charging, and connecon to a range of USB peripherals, including keyboard and mouse.

The Cradle oﬀers the following interfaces: a DC-in port for the AC-DC adapter, an

Ethernet port, a VGA port (oponal), and USB ports. Always seat the DT362 securely

onto the cradle. The cradle must be powered by the AC-DC adapter for the Ethernet and

USB ports to funcon. The baery packs on the DT362 may be recharged by connecng

the AC-DC adapter directly to the DC-in port on the DT362 or through the DC-in port on

the Desktop Cradle while the DT362 is docked to the Cradle.

USING THE DT362

Memory conﬁguraon

The DT362 is available with 2GB memory conﬁguraon. Storage opons currently range

from: 2GB to 16GB ﬂash memory or 32GB to 64GB SSD.

Peripherals Support

Through its USB ports, the DT362 supports a wide range of USB-based peripherals.

These peripherals are applicable for soware installaon, applicaons storage, data

storage, and system soware recovery and updates. The DT362 is also compable with

custom mountable cradle opons. These securable and mountable cradles provide an

interface to VESA mounts and arms, and to ports that may include USB, Ethernet and

pass-through power.

Remote Management

Depending on soware conﬁguraon, the DT362 can be centrally managed for asset

monitoring and for soware control. Please consult your device provider.

Other DT Research Tablet manuals

DT Research

DT Research DT398H Assembly instructions

DT Research

DT Research 590SC Assembly instructions

DT Research

DT Research DT382GL-TR Assembly instructions

DT Research

DT Research DT301Q Assembly instructions

DT Research

DT Research 302MD Assembly instructions

DT Research

DT Research DT311H Assembly instructions

DT Research

DT Research DT313Y Assembly instructions

DT Research

DT Research DT302RP Assembly instructions

DT Research

DT Research DT318CR Assembly instructions

DT Research

DT Research DT382GL Assembly instructions

DT Research

DT Research DT340T Assembly instructions

DT Research

DT Research DT398 SERIES User manual

DT Research

DT Research DT370CR Assembly instructions

DT Research

DT Research WebDT 375 User manual

DT Research

DT Research 504T User manual

DT Research

DT Research 316T Assembly instructions

DT Research

DT Research DT312 Assembly instructions

DT Research

DT Research DT362GL Assembly instructions

DT Research

DT Research 373T/MD Assembly instructions

DT Research

DT Research DT311 Assembly instructions

DT Research

DT Research DT307SQ Assembly instructions

DT Research

DT Research DT313SC-MD Assembly instructions

DT Research

DT Research 502T Assembly instructions

DT Research

DT Research DT317BT Assembly instructions

Popular Tablet manuals by other brands

Laser

Laser MID-1060 Quick operation guide

MUNBYN

MUNBYN IRT09J Easy setup guide

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz quick start guide

Dell

Dell Latitude ST Setup and features information

Lenovo

Lenovo IdeaTab S6000L Hardware Maintenance Manual

Venturer

Venturer WT9L11 quick start guide

EDUGEAR

EDUGEAR UnoBook user guide

Philips

Philips PI3210G/58 user manual

ADLINK Technology

ADLINK Technology IMT-BT user manual

TwinMOS

TwinMOS TwinTAB-T102D1 user guide

Archos

Archos 9.7 xenon manual 

Getac

Getac E100 user manual

HANNspree

HANNspree HANNspad SN70T3 quick start guide

Philips

Philips PI3105W2/55 user manual

LG LG-V935 user guide

Zeki

Zeki TBDB763B user guide

Ricoh

Ricoh eQuill user guide

MaxWest

MaxWest Nitro Phablet 9 user manual