DT Research DT362GL Assembly instructions
Rugged Handheld Tablet
BASIC OPERATION GUIDE
DT362GL
INTRODUCTION
The DT Research DT362GL Handheld Rugged Tablet features the integration of a high brightness 6”
capacitive touch screen and a high performance yet energy efficient processor within a slim, lightweight,
durable package. With built-in Wi-Fi, Bluetooth and a smart card reader as well as options for back camera,
barcode scanner, GNSS and UHF RFID reader, this robust tablet offers seamless information capture and
transmission for improved workflow. Rated IP65 and MIL-STD-810G, the DT362GL Handheld Rugged Tablet
provides reliable operation in harsh, mission-critical environments.
PACKAGE CONTENTS
• One DT362GL
• One Battery Pack and Handstrap
• AC-DC Power Adapter
• Basic Operation Guide
* The actual package contents may vary depending on the configuration acquired.
PRECAUTIONS
• Always exercise care when operating and handling the DT362GL
• Do not disassemble any portion of the DT362GL, as this will void any product warranty.
• Do not use any power adapter or charging cradle other than the one provided with the tablet or acquired
from the manufacturer or its partners.
• In the unlikely event that abnormal noise, strange odor, or smoke is present, immediately power down
the DT362GL and disconnect all power sources. Please report the problem to your device provider
immediately.
Input/ Output Ports Button Functions
A USB Type-C Port (power input) BUTTON
ACTION
Data Capture Modules 1 power button
B Barcode Scanner (optional) 2 Trigger Buttons
C Smart Card Reader 3 Battery Latch
D Back Camera (optional)
E UHF RFID Reader (optional)
2
OPERATION
Powering ON and OFF
To activate DT362GL, push and quickly release the Power Button. The display will come on in a few seconds.
To put the DT362GL in standby mode, push and quickly release the Power Button. To turn the DT362GL off
for extended storage, power off safely using any software function that “shuts down computer” provided in
the software operating system.
NOTE:
The battery packs shipped with your tablet may be low in power - please use the AC-DC adapter with
the DT362GL when setting up for the first time to fully charge the battery pack.
NOTE:
To conserve power, push and quick release the Power Button to make the tablet in standby mode
while not in use. Pushing briefly on the same butt on will wake up the system.
NOTE:
When the battery pack is charging, the blue-colored Battery LED should blink slowly. If plugging in the
AC-DC adapter does not trigger this blinking activity and the LED stays dark, the battery pack(s) may
have been drained substantially.
Unplug/ replug the AC-DC adapter to the DT362GL/ DT362Q a few times to activate the charging
process.
NOTE:
For DT362GL, avoid using the Power Button (“hold 4+ seconds” feature) to turn off the tablet—this
form of hardware shutdown is intended to be a means of recovery from lockups, and not as normal
operation..
3
Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate interface will be displayed
after a launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be
established.
Wireless Networking
Wireless LAN
The DT362GL is often delivered with an embedded (user-inaccessible) 802.11ac LAN adapter equipped with a
hidden custom antenna.
• Through the support of typical WLAN adapters, the DT362G should be able to detect all 802.11 access
points in the vicinity for you to select the access point of your choice for connection.
• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT362G and the access points have to
match. The SSID is case-sensitive and it is recommended that you enable WEP/WPA/WPA2 encryption (or
advanced alternatives) for secure access.
• When WEP/WPA/WPA2 is enabled, you may need to consult your network administrator or your
networking equipment literature to properly configure associated settings such as Authentication mode,
etc.
• Refer to the access point operating manuals for setting up the 802.11 access points.
Bluetooth
The Bluetooth configuration application is enabled from the System Tray or from the Windows Mobility
Center. Follow the instructions and options provided within the application to configure and invoke
Bluetooth connectivity with the corresponding peripherals.
4
Data Capture Module Operation Guide
If your DT362GL comes with a RFID Reader refer to the steps below to configure the settings.
UHF RFID Reader:
The optional UHF RFID reader supports EPC Gen2V2 and ISO 18000-63 standard. To develop an application to
use the UHF RFID reader, contact your device provider for a UHF RFID reader API package
For More Support
Users can download the Tablet Modules Basic Operation Guides from the DT Research website.
NOTE:
To ensure the system performance, turn on only the symbologies you are going to use.
5
Specifications:
Item DT362GL
System
CPU Intel® Pentium® Silver Quad-Core, 1.10GHz (up to 2.70GHz)
RAM 8GB
Storage 256GB
Operating System Microsoft® Windows® 10 IoT Enterprise
Display 6” LED-backlight capacitive touch screen
Display Resolution 720 x 1440
Network Interface Wi-Fi 802.11ac, 2.4GHz/ 5GHz dual band; Bluetooth 4.2 LE
Control Switch and
Buttons
1 power button, 2 trigger buttons
I/O Ports
USB port USB Type-C x 1
(data transmitting and charging. Data transmitting only available in one insertion direction)
Smart Card/CAC Reader
Full slot, reads ISO 7816 T=0, T=1; 1.8/3/5V smart card
Mechanical and Environmental
AC/DC Adapter Input: 100 – 240V AC; Output: 20V DC, 3.25A
Battery Pack Hot swappable battery, 3100mAh
Enclosure ABS + PC plastics
Dimensions (H x W x D)
7.6 x 3.7 x 1.2 in/ 192 x 95 x 31 mm
Weight 1.4 lbs/ 650 g
Regulatory FCC Class B, CE, RoHS compliant
Operating Temperature
Operation: -10°C to 50°C (14°F to 122°F )
Storage: -20°C to 60°C (-4°F to 140°F)
Humidity 0% – 90% non-condensing
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com
Copyright © 2020, DT Research, Inc. All Rights Reserved.
6
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's
authority to operate the equipment.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device is designed and
manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted
by the FCC with the EUT transmitting at the specified power level in different channels.
The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can
be found under the Display Grant section of www.fcc.gov/eot/ea/fccid after searching on FCC ID:
YE3600-3165D2W
Table of contents
Other DT Research Tablet manuals
DT Research
DT Research WebDT 310 Assembly instructions
DT Research
DT Research DT381RP Assembly instructions
DT Research
DT Research DT365 Assembly instructions
DT Research
DT Research DT300Q01 Assembly instructions
DT Research
DT Research DT300Q Assembly instructions
DT Research
DT Research DT311H Assembly instructions
DT Research
DT Research 316T/MD Assembly instructions
DT Research
DT Research 340Q Assembly instructions
DT Research
DT Research DT302P Assembly instructions
DT Research
DT Research DT340T Assembly instructions
DT Research
DT Research DT315CT Assembly instructions
DT Research
DT Research DT361AM Assembly instructions
DT Research
DT Research DT398 Assembly instructions
DT Research
DT Research DT315BT Assembly instructions
DT Research
DT Research DT301Y Assembly instructions
DT Research
DT Research DT311T Assembly instructions
DT Research
DT Research 590SC Assembly instructions
DT Research
DT Research DT307SC Assembly instructions
DT Research
DT Research DT372AP Assembly instructions
DT Research
DT Research DT395GS Assembly instructions
Popular Tablet manuals by other brands
Laser
Laser MID-1060 Quick operation guide
MUNBYN
MUNBYN IRT09J Easy setup guide
Motorola
Motorola MC3090R - Win CE 5.0 Professional 520 MHz quick start guide
Dell
Dell Latitude ST Setup and features information
Lenovo
Lenovo IdeaTab S6000L Hardware Maintenance Manual
Venturer
Venturer WT9L11 quick start guide
