DT Research DT361AM Assembly instructions

Rugged Tablet

signage dtri com

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131

INTRODUCTION

Thank you for acquiring the DT361AM/ DT361AD, part of DT Research’s line of

Rugged tablets. Featuring a slim yet robust enclosure, the DT361AM/ DT361AD with

6” Capacive touch screen is powered by the Intel® processor, oering opmal

combinaons of performance and power savings. The DT361AM/ DT361AD is

available with Microso® Windows® operang system and features web browser,

client/ server compung soware, media player, accessories, and applicaons

support.

PACKAGE CONTENTS

• One DT361AM/ DT361AD with Baery Pack and Handstrap

• AC-DC Power Adapter with Power Cord

• Basic Operaon Guide

DT361AM/ DT361AD

Federal Communication Commission Interference

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protecon against harmful interference in

a residenal installaon. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instrucons, may cause harmful interference to radio communicaons.

However, there is no guarantee that interference will not occur in a parcular

installaon. If this equipment does cause harmful interference to radio or

television recepon, which can be determined by turning the equipment o

and on, the user is encouraged to try to correct the interference by one of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separaon between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Cauon: Any changes or modicaons not expressly approved by the

party responsible for compliance could void the user’s authority to operate

this equipment.

This device complies with Part 15 of the FCC Rules.

Operaon is subject to the following two condions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operaon.

This device and its antenna(s) must not be co-located or operang in

conjuncon with any other antenna or transmier.

This Class [B] digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du

Canada.

Button Functions

BUTTON ACTION BUTTON ACTION

Power Buon Brightness Control Buons

NVIS/ Normal Mode Toggle

(oponal)

Waki-talkie Communicaon

Buons

Programmable Buons Baery Latch *Push the switch up to

unlock the latch, then slide the latch le to

remove the baery.

1 4

Input/ Output Ports

Smart Card Reader (DT361AM)

SD Card Reader (DT361AD)

LAN Port

USB 3.0 Port

USB Type-C Port

(as power input)

PRECAUTIONS

• Always exercise care when operang and handling the DT361AM/ DT361AD.

• Do NOT apply excessive pressure to the display screen.

• We recommend using the Digital Pen (oponal) to keep the screen clean.

• Avoid prolonged exposure of the display panel to any strong heat source.

Wherever possible, the DT361AM/ DT361AD should face away from direct light

to reduce glare.

• If the AC-DC power adapter is used to recharge or power the tablet, do NOT

use any AC-DC adapter other than the one provided or acquired from the

manufacturer or its partners.

• In the unlikely event that smoke, abnormal noise, or strange odor is present, im-

mediately power o the DT361AM/ DT361AD and disconnect all power sources.

Report the problem to your device provider immediately.

• Never aempt to disassemble the DT361AM/ DT361AD, as this will void the

warranty.

BASIC FEATURES

The DT361AM/ DT361AD rugged tablet integrates a dual mode switchable NVIS or

high-brightness touchscreen, USB ports, and embedded networking elements such

as wireless LAN and Bluetooth.

A DT361AM/ DT361AD typically integrates an 802.11ac wireless LAN (WLAN) adapter

that may connect to other wireless devices or access points. If your DT361AM/

DT361AD does not come with such a network adapter, please consult your device

provider to establish the desired network connecvity.

NOTE:

To obtain protecon consistent with any IP rang for the device, the I/O (audio,

power, USB, card reader, etc.) port doors must be closed. If the IP protecon is

compromised by mishandling or misuse, such as by leaving port doors open or

improperly closed, any resulng product damage will not be covered under any

DT Research warranty.

DB C

4 3

DT361ADDT361AM

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate

interface will be displayed aer a launch sequence of several seconds. The wireless

LAN connecon may take 10-15 seconds to be established.

Conﬁguring the Rugged Tablet

The DT361AM/ DT361AD may be congured using the ulies and methods dictated

by the soware operang system. The DT361AM/ DT361AD should be congurable

for various properes such as user proles, network features, and several system

elements.

NVIS Mode and Screen Brightness Control (optional)

• When power buon is pressed to power on the unit, power LED will ash orange

once to indicate the unit is boong. Unit will boot into NVIS mode with zero nit

brightness by default and display will be dark. You can press the “Brightness Up”

and “Brightness Down” buons to set NVIS mode display to desired brightness

(up to 20 nits).

• To toggle between NVIS and high-brightness display mode, press the “NVIS/

Normal Mode Toggle” buon. When changed from NVIS mode to high-brightness

mode, display brightness percentage will be same as the brightness level set in

NVIS mode before toggling.

• Use brightness control buons to set desired brightness level. When changed

from normal display mode to NVIS mode, display brightness will be set to 0 nit

(display is dark) and you need to use brightness control buons to change display

to desired brightness.

OPERATION

Powering ON and OFF

To acvate the DT361AM/ DT361AD, push and quickly release the Power Buon. The

display will come on in a few seconds. To put the DT361AM/ DT361AD in Standby

mode, push and quickly release the Power Buon. To turn the DT361AM/ DT361AD o

for extended storage, power o safely using any soware funcon that “shuts down

computer” provided in the soware operang system.

NOTE:

The baery pack shipped with your tablet may be low in power—please use the

AC-DC adapter with the DT361AM/ DT361AD when seng up for the rst me

to fully charge the baery pack, or use the oponal baery charger kit.

NOTE:

To conserve power, use (push and quick release) the Power Buon to put the

tablet in “Standby” mode while not in use. Pushing briey on the same buon

will wake up the system within seconds.

NOTE:

Avoid using the Power Buon (“hold 4+ seconds” feature) to turn o the

tablet—this form of hardware shutdown is intended to be a means of recovery

from lockups, and not as normal operaon.

USING THE RUGGED TABLET

Peripherals Support

Through its USB 3.0 port, the DT361AM/ DT361AD supports a wide range of

USB-based peripherals. These peripherals are applicable for soware installaon,

applicaons storage, data storage, and system soware recovery and updates.

For More Support

Users can download the Tablet Modules Basic Operaon Guides from the DT Research

website.

Wireless Networking

Wireless LAN

The DT361AM/ DT361AD is oen delivered with an embedded (user-inaccessible)

802.11ac WLAN adapter equipped with a hidden custom antenna.

• Through the support of typical WLAN adapters, the DT361AM/ DT361AD should

be able to detect all 802.11 access points in the vicinity to select the access point

of choice for connecon.

• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT361AM/

DT361AD and the access points have to match. The SSID is case-sensive and it is

recommended to enable WEP/WPA/WPA2 encrypon (or advanced alternaves)

for secure access.

• When WEP/WPA/WPA2 is enabled, you may need to consult your network

administrator or your networking equipment literature to properly congure

associated sengs such as Authencaon mode, etc.

• Refer to the access point operang manuals for seng up the 802.11 access

points.

Bluetooth

The Bluetooth conguraon applicaon is enabled from the System Tray or from the

Windows Mobility Center. Follow the instrucons and opons provided within the

applicaon to congure and invoke Bluetooth connecvity with the corresponding

peripherals.

This manual suits for next models

Other DT Research Tablet manuals

DT Research

DT Research 313Y/MQ Assembly instructions

DT Research

DT Research 502T Assembly instructions

DT Research

DT Research DT398H Assembly instructions

DT Research

DT Research DT372AP Assembly instructions

DT Research

DT Research DT362GL Assembly instructions

DT Research

DT Research DT300Q11 Assembly instructions

DT Research

DT Research DT520 Assembly instructions

DT Research

DT Research DT395CR Assembly instructions

DT Research

DT Research DT372i Assembly instructions

DT Research

DT Research DT311C Assembly instructions

DT Research

DT Research DT315BT Assembly instructions

DT Research

DT Research DT391UF User manual

DT Research

DT Research 373T/MD Assembly instructions

DT Research

DT Research DT372 Assembly instructions

DT Research

DT Research DT395CR Assembly instructions

DT Research

DT Research DT315CT Assembly instructions

DT Research

DT Research DT311T Assembly instructions

DT Research

DT Research WebDT 375 User manual

DT Research

DT Research DT395BV Assembly instructions

DT Research

DT Research DT361DM Assembly instructions

DT Research

DT Research DT370CR Assembly instructions

DT Research

DT Research DT313Cmed Assembly instructions

DT Research

DT Research WebDT 312 Assembly instructions

DT Research

DT Research 311Q Assembly instructions

Popular Tablet manuals by other brands

Laser

Laser MID-1060 Quick operation guide

MUNBYN

MUNBYN IRT09J Easy setup guide

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz quick start guide

Dell

Dell Latitude ST Setup and features information

Lenovo

Lenovo IdeaTab S6000L Hardware Maintenance Manual

Venturer

Venturer WT9L11 quick start guide

EDUGEAR

EDUGEAR UnoBook user guide

Philips

Philips PI3210G/58 user manual

ADLINK Technology

ADLINK Technology IMT-BT user manual

TwinMOS

TwinMOS TwinTAB-T102D1 user guide

Archos

Archos 9.7 xenon manual 

Getac

Getac E100 user manual

HANNspree

HANNspree HANNspad SN70T3 quick start guide

Philips

Philips PI3105W2/55 user manual

LG LG-V935 user guide

Zeki

Zeki TBDB763B user guide

Ricoh

Ricoh eQuill user guide

MaxWest

MaxWest Nitro Phablet 9 user manual