DT Research 301SY Assembly instructions

Rugged Tablet

Federal Communication Commission Interference

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one of the

following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the

party responsible for compliance could void the user’s authority to operate

this equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This device and its antenna(s) must not be co-located or operating in

conjunction with any other antenna or transmitter.

This Class [B] digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du

Canada.

301SY

INTRODUCTION

Thank you for acquiring the 301SY, part of DT Research’s line of Rugged Tablets.

Featuring a slim yet robust enclosure, the 301SY with 10.1” TFT display is powered by

the Intel® Core™ i or Qualcomm octa-core processor, offeringoptimal combinations of

performance and power savings. The 301SY is available with Microsoft® Windows® or

Android operating system. The software operating system features web browser,

client/ server computing software, media player, accessories, and applications support.

PACKAGE CONTENTS

•One 301SY with Battery Pack and Handstrap

•AC-DC Power Adapter with Power Cord

•Basic Operation Guide

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131

BOG012722 DT301YQ ENG

*If your 301SY contains camera or barcode scanner, please refer to the

Tablet Modules Basic Operation Guide for detailed operation.

For the product take-back service information, please visit:

http://www.dtresearch.com.tw/zh/About/csr.html

NOTE:

To obtain protection consistent with any IP rating for the device, the I/O (audio,

power, USB, card reader, etc.) port doors must be closed. If the IP protection is

compromised by mishandling or misuse, such as by leaving port doors open or

improperly closed, any resulting product damage will not be covered under any

DT Research warranty.

A Headphone Jack

BLAN Port

CUSB 3.0 Port

PRECAUTIONS

•Always exercise care when operating and handling the 301SY.

•Do NOT apply excessive pressure to the display screen.

•We recommend using the Digital Pen (optional) to keep the screen clean.

•Avoid prolonged exposure of the display panel to any strong heat source.

Wherever possible, the 301SY should face away from direct light toreduce

glare.

•If the AC-DC power adapter is used to recharge or power the tablet, do NOT use

any AC-DC adapter other than the one provided or acquired from the manufac-

turer or its partners.

•In the unlikely event that smoke, abnormal noise, or strange odor is present,

immediately power off the 301SY and disconnect all power sources. Report

the problem to your device provider immediately.

•Never attempt to disassemble the 301SY, as this will void the warranty.

Input/ Output Ports

Button Functions

BASIC FEATURES

The 301SY rugged tablet integrates a bright display, USB ports, and

embedded networking elements such as wireless LAN and Bluetooth or optional 4G.

A 301SY typically integrates an 802.11ac wireless LAN (WLAN) adapter that may

connect to other wireless devices or access points. If your 301SY does not come

with such a network adapter, please consult your device provider toestablish the

desired network connectivity.

BUTTON ACTION

1Power Button

2Programmable Buttons

3Battery Latch *Push the switch up to unlock the latch, then slide the latch left to remove the battery.

Battery/Power LED

Brightness

Control buttons

D USB Type-C Port (power input)

Smart Card Reader (DT301Y only)

OPERATION

Powering ON and OFF

To activate the 301SY, push and quickly release the Power Button. The displaywill

come on in a few seconds. To put the 301SY in Standby mode, push andquickly

release the Power Button. To turn the 301SY off for extended storage, power off safely

using any software function that “shuts down computer” provided in the software

operating system.

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate

interface will be displayed after a launch sequence of several seconds. The wireless

LAN connection may take 10-15 seconds to be established.

Conﬁguring the Mobile Tablet

The 301SY may be configured using the utilities and methods dictated by the

software operating system. The 301SY should be configurable for variousproperties

such as user profiles, network features, and several system elements.

Wireless Networking

Wireless LAN

The 301SY is often delivered with an embedded (user-inaccessible) 802.11acWLAN

adapter equipped with a hidden custom antenna.

•Through the support of typical WLAN adapters, the 301SY should be able to

detect all 802.11 access points in the vicinity for you to select the access point of

your choice for connection.

•The SSID and WEP/WPA/WPA2 (if enabled) parameters on the 301SY and the

access points have to match. The SSID is case-sensitive and it is recom- mended

that you enable WEP/WPA/WPA2 encryption (or advanced alternatives)for

secure access.

•When WEP/WPA/WPA2 is enabled, you may need to consult your network

administrator or your networking equipment literature to properly configure

associated settings such as Authentication mode, etc.

•Refer to the access point operating manuals for setting up the 802.11 access

points.

Bluetooth

The Bluetooth configuration application is enabled from the Windows System Tray

or from the Android Settings APP. Follow the instructions and options provided

within the application to configure and invoke Bluetooth connectivity with the

corresponding peripherals.

NOTE:

For DT301Y, avoid using the Power Button (“hold 4+ seconds” feature) to turn

off the tablet—this form of hardware shutdown is intended to be a means of

recovery from lockups, and not as normal operation.

NOTE:

To conserve power, use (push and quick release) the Power Button to put the

tablet in “Standby” mode while not in use. Pushing briefly on the same button

will wake up the system within seconds.

NOTE:

When the battery pack is charging, the blue-colored Battery LED should blink

slowly. If plugging in the AC-DC adapter does not trigger this blinking activity

and the LED stays dark, the battery pack(s) may have been drained substantially.

Try unplugging/ replugging the AC-DC adapter to the 301SY a few times to

activate the charging process.

NOTE:

The battery pack shipped with your tablet may be low in power—please use the

AC-DC adapter with the 301SY when setting up for the first time to fully charge

the battery pack, or use the optional battery charger kit.

CAUTION:

Do not attempt to disassemble the battery pack.

USING THE MOBILE TABLET

Peripherals Support

Through its USB 3.0 port, the 301SY supports a wide range of USB-based

peripherals. These peripherals are applicable for software installation, applications

storage, data storage, and system software recovery and updates.

Replacing the Battery Pack

1. Slide the battery latch to the unlocked position.

2. Lift the battery pack off the compartment.

For More Support

Users can download the Tablet Modules Basic Operation Guides from the DT Research

website.

3. Fit another battery pack into place.

4. Slide the latch to the locked position.

5. If you want to purchase extra battery packs, please contact your dealers, or visit

our Support page: https://www.dtresearch.com/en/Support/contact.html

CAUTION:

There is danger of explosion if the battery is incorrectly replaced. Replace the

battery only with the Tablet manufacturer’s battery. Discard used batteries

according to the dealer’s instructions.

To Hold the Tablet

Left hand: grip the left back side of the tablet

with your left hand four index fingers, with

thumb resting on the top of the back side of the

tablet and palm securely against the back.

Right hand: grip the right back side of the tablet

with your right hand four index fingers, with

thumb resting on the top of the back side of the

tablet and palm securely against the back.

RF Exposure Compliance

This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 0mm must be maintained between the user’s body and

the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not

meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

The band 5150-5350 MHz for this device are restricted to indoor use only.

Supplier's Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Unique Identifier Trade Name:

Model No.: 301SY

Responsible Party – U.S. Contact Information

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131

http://www.dtresearch.com

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired

operation.

IC Regulatory Compliance

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le present appareilest conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions

suivantes:(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est susceptible d'en compromettre le fonctionnement.

RF Exposure Compliance

This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for

satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over

one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body.

Cet équipement est conforme aux limites d’exposition aux rayonnements ISED établies pour un environnement non contrôlé. L’utilisateur final doit suivre les instructions

spécifiques pour satisfaire les normes. Cet émetteur ne doit pas être co-implanté ou fonctionner en conjonction avec toute autre antenne ou transmetteur.

Le dispositif portatif est conçu pour répondre aux exigences d’exposition aux ondes radio établie par le développement énergétique DURABLE. Ces exigences un SAR limite de 1,6

W/kg en moyenne pour un gramme de tissu. La valeur SAR la plus élevée signalée en vertu de cette norme lors de la certification de produit à utiliser lorsqu’il est correctement

porté sur le corps.

Table of contents

Other DT Research Tablet manuals

DT Research

DT Research DT380CR Assembly instructions

DT Research

DT Research DT370CR Assembly instructions

DT Research

DT Research DT302P Assembly instructions

DT Research

DT Research DT313C Assembly instructions

DT Research

DT Research DT310CR Assembly instructions

DT Research

DT Research DT311Y Assembly instructions

DT Research

DT Research DT390 Assembly instructions

DT Research

DT Research DT310CR Assembly instructions

DT Research

DT Research DT391GS Assembly instructions

DT Research

DT Research DT301Y Assembly instructions

DT Research

DT Research 301Y/MD Assembly instructions

DT Research

DT Research DT313Y Assembly instructions

DT Research

DT Research DT520 Assembly instructions

DT Research

DT Research DT315BT Assembly instructions

DT Research

DT Research WebDT 310 Assembly instructions

DT Research

DT Research 504T User manual

DT Research

DT Research DT311YR Assembly instructions

DT Research

DT Research DT382GL-TR Assembly instructions

DT Research

DT Research DT313SC Assembly instructions

DT Research

DT Research 524T Assembly instructions

DT Research

DT Research DT301YR Assembly instructions

DT Research

DT Research DT311H Assembly instructions

DT Research

DT Research DT395BV Assembly instructions

DT Research

DT Research DT398 SERIES User manual

Popular Tablet manuals by other brands

Laser

Laser MID-1060 Quick operation guide

MUNBYN

MUNBYN IRT09J Easy setup guide

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz quick start guide

Dell

Dell Latitude ST Setup and features information

Lenovo

Lenovo IdeaTab S6000L Hardware Maintenance Manual

Venturer

Venturer WT9L11 quick start guide

EDUGEAR

EDUGEAR UnoBook user guide

Philips

Philips PI3210G/58 user manual

ADLINK Technology

ADLINK Technology IMT-BT user manual

TwinMOS

TwinMOS TwinTAB-T102D1 user guide

Archos

Archos 9.7 xenon manual 

Getac

Getac E100 user manual

HANNspree

HANNspree HANNspad SN70T3 quick start guide

Philips

Philips PI3105W2/55 user manual

LG LG-V935 user guide

Zeki

Zeki TBDB763B user guide

Ricoh

Ricoh eQuill user guide

MaxWest

MaxWest Nitro Phablet 9 user manual