DT Research DT372 Assembly instructions

DT372

ENGLISH

Mobile POS Tablet

BASIC OPERATION GUIDE

DT372

ENGLISH 8

signage dtri com

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131 hp://www.dtresearch.com

DT Research is registered trademarks of DT Research, Inc.

INTRODUCTION

Thank you for acquiring the latest addion to DT Research’s line of mobile tablets—the

DT372. Featuring an IP54-rated, slim yet robust enclosure, the two-pound DT372 with

7”TFT display is powered by the Intel®Atom™ processor, oﬀering opmal combinaons

of performance and power savings.

The DT372 is available with Windows®Embedded Standard 7, Windows®XP Embedded,

Windows®XP Pro for Embedded Systems, Windows®7 Pro or Linux operang systems.

Each soware operang system features web browser, client/server compung

soware, media player, accessories, and applicaons support.

PACKAGE CONTENTS

DT372 with Internal Baery Pack, Stylus and Bumpers•

AC-DC Power Adapter with Power Cord•

Basic Operaon Guide•

Major opons, depending on conﬁguraon:

Desktop Charging Cradle with DC-in Power Jack and Ethernet/ USB Ports•

Handstrap•

* If your DT372 contains MSR, camera or scanner module, please refer to the POS module operaon guide for

detailed operaon.

BOG121611DT372ENG

SPECIFICATIONS

System

Processor Intel® Atom™ Z530, 1.6GHz

Memory (RAM) 2GB

Storage 2GB to 32GB Flash

Operang Systems

Microso® Windows® Embedded Standard 7,

Windows® 7 Professional, Windows® XP Embedded,

Windows® XP Pro for Embedded Systems, or Linux

Display 7”LED-backlight screen with resisve touch;

sunlight-readable opon

Display Resoluon 1024 x 600 (WSVGA)

Network Interface Wi-Fi 802.11a/b/g/n, Bluetooth 2.1 with EDR

Control Switch and Buons 1 power buon, 5 front buons and 1 trigger buon

Indicator 1 power/ baery status LED and 1 WLAN acve LED

Speaker/Microphone Built-in speaker; built-in internal microphone

Input/Output Ports 1 DC-in Jack; 1 USB 2.0 port;

1 Headphone-out Jack combined with microphone

Power

AC/DC Adapter Input: 100 – 240V AC; Output: 19V DC, 2.36A

Baery Pack Removable 7.4V, 3760mAh

Mechanical

Enclosure ABS + PC plascs

Stylus Non-electronic p

Protecve Grip Rubber

Dimensions (H x W x D) 7.4 x 9.3 x 1.6 in/ 190 x 237 x 41 mm

Weight 2.43 lbs/ 1.1 kg

Environmental

Water and Dust Resistance IP64 * IP64 rang may not be applicable for units with MSR or

Smart Card Reader module opons

Regulatory FCC Class B, CE, C-Tick, RoHS compliant

Temperature Operaon: -10°C - 50°C; Storage: -10°C - 60°C

Humidity 0% - 90% non-condensing

* Speciﬁcaons subject to change without noce.

DT372

ENGLISH 23ENGLISH

Buon Funcons (with Windows XP Operang System)

BUTTON ACTION

Programmable

Programmable, launch so(on-screen) keyboard (default)

Launch SAS (Secure Aenon Sequence)

Generate Ctrl+Alt+Del keys to invoke the security windows deﬁned under Windows XP

Programmable,

Change display orientaon (portrait/ landscape) (default)

Programmable, system ulity menu (default)

Power on,

Push/release typically enters Standby mode, or Push/release exits Standby mode or

restarts device (soware dependent)

Push and hold (over 4 seconds) invokes hardware shutdown

Programmable,

As scanner trigger when equipped with the scanner module

The DT372 (with Windows XP Operang System)

Baery/Power LED

StylusWireless LED

Microphone

Buon ManagementWireless Network Sengs

Calibraon

Power/Baery LED Status:

Blue indicates the baery is 25% to 100% charged•

Blinking blue indicates the baery is charging•

Orange indicates that the baery is between 11% to 25%•

Blinking Orange indicates that the baery is below 10%•

Precauons

Always exercise care when operang and handling the DT372.

•

Do NOT apply excessive pressure to the display screen.

•

We recommend using the Stylus provided to keep the screen clean.

•

Avoid prolonged exposure of the display panel to any strong heat source. Wherever

•

possible, the DT372 should face away from direct light to reduce glare.

If the AC-DC power adapter is used to recharge or power the device, do NOT use any

•

AC-DC adapter other than the one provided with the device or acquired from the

manufacturer or its partners.

In the unlikely event that smoke, abnormal noise, or strange odor is present,

•

immediately power oﬀthe DT372 and disconnect all power sources. Report the

problem to your device provider immediately.

Never aempt to disassemble the DT372, as this will void the warranty.

•

THE DT372

Basic Features

The DT372 wireless tablet integrates a bright and responsive touch display, 1 USB

port, and embedded networking elements such as wireless LAN, Bluetooth or oponal

3G. The primary device is complemented by a suite of accessories, including baery

expansion, docking cradles, and carrying cases, for a comprehensive user experience.

A DT372 typically integrates an 802.11a/b/g/n wireless LAN (WLAN) adapter that may

connect to other wireless devices or access points. If your DT372 does not come with

such a network adapter, please consult your device provider to establish the desired

network connecvity.

Input/ Output Ports

DC Power Input

USB Port

Headphone Jack

12345

Baery and Power Meter

Front View

Le

Right

Rear View

DT372

ENGLISH 45ENGLISH

OPERATION

Internal Baery

Warning!

The Internal baery pack should only be replaced by an authorized DT Research service

representave. Please contact your product and/or service provider for internal baery

replacement service.

Powering ON and OFF

To acvate the DT372, use the stylus to push and quickly release the Power Buon. The

display will come on in a few seconds. To put the DT372 in Standby mode, push and

quickly release the Power Buon. To turn the DT372 oﬀfor extended storage, power oﬀ

the device safely using any soware funcon that “shuts down computer”provided in

the soware operang system.

NOTE: The baery packs shipped with your device may be low in power—please use

the AC-DC adapter with the DT372 when seng up the device for the ﬁrst me to fully

charge the internal baery pack.

NOTE: When the baery pack(s) is (are) charging, the blue-colored Baery LED should

blink slowly. If plugging in the AC-DC adapter does not trigger this blinking acvity

and the LED stays dark, the baery pack(s) may have been drained substanally. Try

unplugging/ replugging the AC-DC adapter to the DT372 a few mes to acvate the

charging process.

NOTE: To conserve power, use (push and quick release) the Power Buon to put the

device in “Standby”mode while not in use. Pushing brieﬂy on the same buon will wake

up the system within seconds.

NOTE: Avoid using the Power Buon (“hold 4+ seconds”feature) to turn oﬀthe

device—this form of hardware shutdown is intended to be a means of recovery from

device lockups, and not as normal operaon.

Start Up

If the power up (from Standby or otherwise) is successful, the appropriate interface will

be displayed aer a launch sequence of several seconds. The wireless LAN connecon

may take 10-15 seconds to be established.

Conﬁguring the DT372

The device may be conﬁgured using the ulies and methods dictated by the soware

operang system. The DT372 should be conﬁgurable for various properes such as user

proﬁles, network features, and several system elements.

Calibraon

The touch display for the DT372 is calibrated before shipping. In the event that the

calibraon has been modiﬁed or is unsasfactory, the respecve calibraon rounes

(e.g., PenMount (PM) for Windows XP) to calibrate the touch interface may be used.

Such applicaons are typically executed through touch input via Stylus or through mouse

click via a USB mouse.

Wireless Networking

Wireless LAN

The DT372 is oen delivered with an embedded (user-inaccessible) 802.11a/b/g/n

WLAN adapter equipped with a hidden custom antenna.

•hrough the support of typical WLAN adapters, the DT372 should be able to detect

all 802.11 access points in the vicinity for you to select the access point of your

choice for connecon.

•he SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT372 and the

access points have to match. The SSID is case-sensive and it is recommended

that you enable WEP/WPA/WPA2 encrypon (or advanced alternaves) for secure

access.

•hen WEP/WPA/WPA2 is enabled, you may need to consult your network admin-

istrator or your networking equipment literature to properly conﬁgure associated

sengs such as Authencaon mode, etc.

•efer to the access point operang manuals for seng up the 802.11 access points.

DT372

ENGLISH 67ENGLISH

Bluetooth

The DT372 features a built-in Bluetooth adapter that operates on the Microso

Windows Bluetooth protocol. The Bluetooth conﬁguraon applicaon is invoked from

the System Tray or from the Control Panel for Windows XP. Follow the instrucons and

opons provided within the applicaon to conﬁgure and invoke Bluetooth connecvity

with the corresponding peripherals.

NOTE: Bluetooth devices or accessories that are not compable with the Microso

Windows Bluetooth protocol may not work with the DT372.

Buon Management

Where supported by soware, many of the hard buons on the DT372 are

programmable to perform a funcon of the user’s choice. The excepon is the Power

Buon and the SAS Buon. To acvate the buon re-assignment applicaon, invoke the

Buon Manager applicaon, e.g., in Windows XP Embedded .

Brightness Control

Where supported by device ﬁrmware and soware, a hard buon may be engaged to

manipulate the display brightness. Press the System Menu buon (Buon 7) on the front

of the DT372. The System screen will display a Brightness control secon with up and

down arrows that can be acvated with the stylus.

Baery and Power Management

The DT372 is equipped with an internal 3760mAh Li-Ion baery pack that is capable

of supporng approximately 3 - 4 hours of connuous operaon. The period between

baery recharges can be signiﬁcantly lengthened by pung the device into Standby

mode through the Power Buon (see Buons Funcon Table) whenever the device is

not in use. Depending on the operang soware, the DT372 may also be conﬁgured to

enter various power-saving modes via the Power Buon or through med entry.

Desktop Cradle

The DT372 is complemented by an oponal Desktop Cradle for support, pass-through

charging, and connecon to a range of USB peripherals, including keyboard and mouse.

The Cradle oﬀers the following interfaces: a DC-in port for the AC-DC adapter, an

Ethernet port, and USB ports. Always seat the DT372 securely onto the cradle. The cradle

must be powered by the AC-DC adapter for the Ethernet and USB ports to funcon. The

baery packs on the DT372 may be recharged by connecng the AC-DC adapter directly

to the DC-in port on the DT372 or through the DC-in port on the Desktop Cradle while

the DT372 is docked to the Cradle.

USING THE DT372

Memory & Storage conﬁguraon

The DT372 is available with 2GB memory conﬁguraon. Storage opons currently range

from 2GB to 32GB ﬂash memory.

Peripherals Support

Through its USB ports, the DT372 supports a wide range of USB-based peripherals.

These peripherals are applicable for soware installaon, applicaons storage, data

storage, and system soware recovery and updates. The DT372 is also compable with

custom mountable cradle opons. These securable and mountable cradles provide an

interface to VESA mounts and arms, and to ports that may include USB, Ethernet and

pass-through power.

Other DT Research Tablet manuals

DT Research

DT Research DT370CR Assembly instructions

DT Research

DT Research DT313Y Assembly instructions

DT Research

DT Research DT380CR Assembly instructions

DT Research

DT Research 301MD Assembly instructions

DT Research

DT Research 316T/MD Assembly instructions

DT Research

DT Research DT340T Assembly instructions

DT Research

DT Research 316T Assembly instructions

DT Research

DT Research DT315BT Assembly instructions

DT Research

DT Research DT301X-TR Assembly instructions

DT Research

DT Research DT303CI Assembly instructions

DT Research

DT Research DT301YR Assembly instructions

DT Research

DT Research DT395BT Assembly instructions

DT Research

DT Research DT370CR Assembly instructions

DT Research

DT Research DT315CR Assembly instructions

DT Research

DT Research DT398 SERIES User manual

DT Research

DT Research DT315CT Assembly instructions

DT Research

DT Research DT395BV Assembly instructions

DT Research

DT Research DT313T Assembly instructions

DT Research

DT Research DT300Q11 Assembly instructions

DT Research

DT Research DT301A Assembly instructions

DT Research

DT Research DT520 Assembly instructions

DT Research

DT Research 524T Assembly instructions

DT Research

DT Research DT300Q Assembly instructions

DT Research

DT Research WebDT 360 Assembly instructions

Popular Tablet manuals by other brands

Laser

Laser MID-1060 Quick operation guide

MUNBYN

MUNBYN IRT09J Easy setup guide

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz quick start guide

Dell

Dell Latitude ST Setup and features information

Lenovo

Lenovo IdeaTab S6000L Hardware Maintenance Manual

Venturer

Venturer WT9L11 quick start guide

EDUGEAR

EDUGEAR UnoBook user guide

Philips

Philips PI3210G/58 user manual

ADLINK Technology

ADLINK Technology IMT-BT user manual

TwinMOS

TwinMOS TwinTAB-T102D1 user guide

Archos

Archos 9.7 xenon manual 

Getac

Getac E100 user manual

HANNspree

HANNspree HANNspad SN70T3 quick start guide

Philips

Philips PI3105W2/55 user manual

LG LG-V935 user guide

Zeki

Zeki TBDB763B user guide

Ricoh

Ricoh eQuill user guide

MaxWest

MaxWest Nitro Phablet 9 user manual