DT Research DT301NV Assembly instructions

Rugged Tablet

signage dtri com

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131

INTRODUCTION

Thank you for acquiring the DT301NV, part of DT Research’s line of Rugged tablets.

Featuring a slim yet robust enclosure, the DT301NV with 10.1” and dual mode

switchable NVIS or high-brightness touchscreen is powered by the Intel® processor,

oering opmal combinaons of performance and power savings. The DT301NV is

available with Microso® Windows® operang system and features web browser,

client/ server compung soware, media player, accessories, and applicaons

support.

PACKAGE CONTENTS

• One DT301NV with Baery Pack and Handstrap

• AC-DC Power Adapter with Power Cord

• Basic Operaon Guide

* If your DT301NV contains camera or barcode scanner, please refer to the Tablet

Modules Basic Operaon Guide for detailed operaon.

DT301NV

Federal Communication Commission Interference

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protecon against harmful interference in

a residenal installaon. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instrucons, may cause harmful interference to radio communicaons.

However, there is no guarantee that interference will not occur in a parcular

installaon. If this equipment does cause harmful interference to radio or

television recepon, which can be determined by turning the equipment o

and on, the user is encouraged to try to correct the interference by one of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separaon between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Cauon: Any changes or modicaons not expressly approved by the

party responsible for compliance could void the user’s authority to operate

this equipment.

This device complies with Part 15 of the FCC Rules.

Operaon is subject to the following two condions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operaon.

This device and its antenna(s) must not be co-located or operang in

conjuncon with any other antenna or transmier.

This Class [B] digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du

Canada.

Button Functions

BUTTON ACTION BUTTON ACTION

Power Buon Control Center Buon

Windows Key Buon NVIS/ Normal Mode Toggle

Programmable Buons Brightness Control Buons

Baery Latch *Push the switch up

to unlock the latch, then slide the latch

le to remove the baery.

Input/ Output Ports

Headphone Jack

LAN Port

USB 3.0 Port

USB Type-C Port

(also as power input)

Smart Card Reader

1 2

Baery/Power LED

Sleep Mode LED

2 3 4 6

PRECAUTIONS

• Always exercise care when operang and handling the DT301NV.

• Do NOT apply excessive pressure to the display screen.

• We recommend using the Digital Pen (oponal) to keep the screen clean.

• Avoid prolonged exposure of the display panel to any strong heat source.

Wherever possible, the DT301NV should face away from direct light to reduce

glare.

• If the AC-DC power adapter is used to recharge or power the tablet, do NOT

use any AC-DC adapter other than the one provided or acquired from the

manufacturer or its partners.

• In the unlikely event that smoke, abnormal noise, or strange odor is present,

immediately power o the DT301NV and disconnect all power sources. Report

the problem to your device provider immediately.

• Never aempt to disassemble the DT301NV, as this will void the warranty.

BASIC FEATURES

The DT301NV rugged tablet integrates a dual mode switchable NVIS or high-brightness

touchscreen, USB ports, and embedded networking elements such as wireless LAN and

Bluetooth or oponal 4G LTE/ AWS.

A DT301NV typically integrates an 802.11ac wireless LAN (WLAN) adapter that may

connect to other wireless devices or access points. If your DT301NV does not come

with such a network adapter, please consult your device provider to establish the

desired network connecvity.

NOTE:

To obtain protecon consistent with any IP rang for the device, the I/O (audio,

power, USB, card reader, etc.) port doors must be closed. If the IP protecon is

compromised by mishandling or misuse, such as by leaving port doors open or

improperly closed, any resulng product damage will not be covered under any

DT Research warranty.

OPERATION

Powering ON and OFF

To acvate the DT301NV, push and quickly release the Power Buon. The display will

come on in a few seconds. To put the DT301NV in Standby mode, push and quickly

release the Power Buon. To turn the DT301NV o for extended storage, power

o safely using any soware funcon that “shuts down computer” provided in the

soware operang system.

NOTE:

The baery pack shipped with your tablet may be low in power—please use

the AC-DC adapter with the DT301NV when seng up for the rst me to fully

charge the baery pack, or use the oponal baery charger kit.

NOTE:

When the baery pack is charging, the blue Baery LED should blink slowly.

If plugging in the AC-DC adapter does not trigger this blinking acvity and

the LED stays dark, the baery pack(s) may have been drained substanally.

Try unplugging/ replugging the AC-DC adapter to the DT301NY a few mes to

acvate the charging process.

NOTE:

To conserve power, use (push and quick release) the Power Buon to put the

tablet in “Standby” mode while not in use. Pushing briey on the same buon

will wake up the system within seconds.

NOTE:

Avoid using the Power Buon (“hold 4+ seconds” feature) to turn o the

tablet—this form of hardware shutdown is intended to be a means of recovery

from lockups, and not as normal operaon.

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate

interface will be displayed aer a launch sequence of several seconds. The wireless

LAN connecon may take 10-15 seconds to be established.

Conﬁguring the Rugged Tablet

The DT301NV may be congured using the ulies and methods dictated by

the soware operang system. The DT301NV should be congurable for various

properes such as user proles, network features, and several system elements.

NVIS Mode and Screen Brightness Control

• When power buon is pressed to power on the unit, power LED will ash orange

once to indicate the unit is boong. Unit will boot into NVIS mode with zero nit

brightness by default and display will be dark. You can press the “Brightness Up”

and “Brightness Down” buons to set NVIS mode display to desired brightness

(up to 20 nits).

• To toggle between NVIS and high-brightness display mode, press the “NVIS/

Normal Mode Toggle” buon. When changed from NVIS mode to high-brightness

mode, display brightness percentage will be same as the brightness level set in

NVIS mode before toggling.

• Use brightness control buons to set desired brightness level. When changed

from normal display mode to NVIS mode, display brightness will be set to 0 nit

(display is dark) and you need to use brightness control buons to change display

to desired brightness.

• Brightness up, Brightness down, NVIS/Normal toggle, Windows Key and Control

Center funcons are xed and not user programmable.

• Two programmable buons on le side can be programmed through Buon

Manager.

Wireless Networking

Wireless LAN

The DT301NV is oen delivered with an embedded (user-inaccessible) 802.11ac

WLAN adapter equipped with a hidden custom antenna.

• Through the support of typical WLAN adapters, the DT301NV should be able to

detect all 802.11 access points in the vicinity to select the access point of choice

for connecon.

• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT301NV and the

access points have to match. The SSID is case-sensive and it is recommended to

enable WEP/WPA/WPA2 encrypon (or advanced alternaves) for secure access.

• When WEP/WPA/WPA2 is enabled, you may need to consult your network

administrator or your networking equipment literature to properly congure

associated sengs such as Authencaon mode, etc.

• Refer to the access point operang manuals for seng up the 802.11 access

points.

Bluetooth

The Bluetooth conguraon applicaon is enabled from the System Tray or from the

Windows Mobility Center. Follow the instrucons and opons provided within the

applicaon to congure and invoke Bluetooth connecvity with the corresponding

peripherals.

USING THE RUGGED TABLET

Peripherals Support

Through its USB 3.0 port, the DT301NV supports a wide range of USB-based

peripherals. These peripherals are applicable for soware installaon, applicaons

storage, data storage, and system soware recovery and updates.

For More Support

Users can download the Tablet Modules Basic Operaon Guides from the DT Research

website.

If the DT301NV comes with a Mobile broadband module, please contact your

product and/or service provider for the SIM Card installaon procedures.

To Hold the Tablet

Le hand: grip the le back side of the tablet

with your le hand four index ngers, with

thumb resng on the top of the back side of the

tablet and palm securely against the back.

Right hand: grip the right back side of the tablet

with your right hand four index ngers, with

thumb resng on the top of the back side of the

tablet and palm securely against the back.

Other DT Research Tablet manuals

DT Research

DT Research DT391GS Assembly instructions

DT Research

DT Research DT372i Assembly instructions

DT Research

DT Research DT313Cmed Assembly instructions

DT Research

DT Research DT313C Assembly instructions

DT Research

DT Research WebDT 310 Assembly instructions

DT Research

DT Research 301MD Assembly instructions

DT Research

DT Research DT301YR Assembly instructions

DT Research

DT Research DT311NV User manual

DT Research

DT Research DT395 Assembly instructions

DT Research

DT Research DT365 Assembly instructions

DT Research

DT Research DT340T Assembly instructions

DT Research

DT Research DT313T Assembly instructions

DT Research

DT Research WebDT 312 Assembly instructions

DT Research

DT Research 502T Assembly instructions

DT Research

DT Research DT300Q01 Assembly instructions

DT Research

DT Research DT395CR Assembly instructions

DT Research

DT Research DT311Y Assembly instructions

DT Research

DT Research DT318CR Assembly instructions

DT Research

DT Research DT315BT Assembly instructions

DT Research

DT Research 590SC Assembly instructions

DT Research

DT Research DT370CR Assembly instructions

DT Research

DT Research 301Y/MD Assembly instructions

DT Research

DT Research DT302RP Assembly instructions

DT Research

DT Research DT301C Assembly instructions

Popular Tablet manuals by other brands

Laser

Laser MID-1060 Quick operation guide

MUNBYN

MUNBYN IRT09J Easy setup guide

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz quick start guide

Dell

Dell Latitude ST Setup and features information

Lenovo

Lenovo IdeaTab S6000L Hardware Maintenance Manual

Venturer

Venturer WT9L11 quick start guide

EDUGEAR

EDUGEAR UnoBook user guide

Philips

Philips PI3210G/58 user manual

ADLINK Technology

ADLINK Technology IMT-BT user manual

TwinMOS

TwinMOS TwinTAB-T102D1 user guide

Archos

Archos 9.7 xenon manual 

Getac

Getac E100 user manual

HANNspree

HANNspree HANNspad SN70T3 quick start guide

Philips

Philips PI3105W2/55 user manual

LG LG-V935 user guide

Zeki

Zeki TBDB763B user guide

Ricoh

Ricoh eQuill user guide

MaxWest

MaxWest Nitro Phablet 9 user manual