DT Research 313Y/MQ Assembly instructions
Medical Tablet
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2021, DT Research, Inc. All Rights Reserved. BOG042121 313Y/MD, 313MQ ENG
INTRODUCTION
Thank you for acquiring the 313Y/MD, 313MQ, part of DT Research’s line of Medical
Tablets. Featuring a slim yet robust enclosure, the 313Y/MD, 313MQ with 13.3” TFT
display is powered by the Intel® Core™ i quad-core or Qualcomm octa-core proces-
sor, oering opmal combinaons of performance and power savings. The 313Y/MD,
313MQ is available with Microso® Windows® or Android operang system. The
soware operang system features web browser, client/ server compung soware,
media player, accessories, and applicaons support.
PACKAGE CONTENTS
• One 313Y/MD, 313MQ with Baery Pack and Handstrap
• AC-DC Power Adapter with Power Cord
• Basic Operaon Guide
313Y/MD, 313MQ
2
Button Functions
BUTTON ACTION
Brightness Control Buons
Programmable Buons
Power Buon
Baery Latch
Input/ Output Ports
Smart Card Reader (313MD only)
Headphone-out
Ethernet Port
USB 3.0 Ports
USB Type-C (power input)
1
2
3
4
A
B
C
D
E
3
PRECAUTIONS
• Always exercise care when operang and handling the 313Y/MD, 313MQ
• Do NOT apply excessive pressure to the display screen.
• We recommend using the Digital Pen (oponal) to keep the screen clean.
• Avoid prolonged exposure of the display panel to any strong heat source.
Wherever possible, the 313Y/MD, 313MQ should face away from direct light to
reduce glare.
• If the AC-DC power adapter is used to recharge or power the tablet, do NOT use
any AC-DC adapter other than the one provided or acquired from the manufac-
turer or its partners.
• In the unlikely event that smoke, abnormal noise, or strange odor is present,
immediately power o the 313Y/MD, 313MQ and disconnect all power sources.
Report the problem to your device provider immediately.
• Never aempt to disassemble the 313Y/MD, 313MQ, as this will void the
warranty.
BASIC FEATURES
The 313Y/MD, 313MQ wireless tablet integrates a bright and mul-touch display,
USB ports, and embedded networking elements such as wireless LAN and Bluetooth.
The 313Y/MD, 313MQ is complemented by a suite of accessories, including baery
expansion, charging cradles, and baery charger kit, for a comprehensive user
experience.
A 313Y/MD, 313MQ typically integrates an 802.11ac wireless LAN (WLAN) adapter
that may connect to other wireless devices or access points. If your 313Y/MD,
313MQ does not come with such a network adapter, please consult your device
provider to establish the desired network connecvity.
Power/Battery LED Status:
• Blue indicates the baery is 25% to 100% charged
• Blinking blue indicates the baery is charging
• Orange indicates that the baery is between 11% to 25%
• Blinking Orange indicates that the baery is below 10%
Baery/Power LED
1
2
2
3
4
D
A
D
B
C
E
OPERATION
Powering ON and OFF
To acvate the 313Y/MD, 313MQ, push and quickly release the Power Buon. The
display will come on in a few seconds. To put the 313Y/MD, 313MQ in Standby mode,
push and quickly release the Power Buon. To turn the 313Y/MD, 313MQ o for
extended storage, power o safely using any soware funcon that “shuts down
computer” provided in the soware operang system.
NOTE:
The baery packs shipped with your tablet may be low in power—please use
the AC-DC adapter with the 313Y/MD, 313MQ when seng up for the rst me
to fully charge the internal baery pack.
NOTE:
When the baerypack(s) is (are) charging, the blue-colored Baery LED should
blink slowly. If plugging in the AC-DC adapter does not trigger this blinking
acvity and the LED stays dark, the baery pack(s) may have been drained
substanally. Try unplugging/ replugging the AC-DC adapter to the 313Y/MD,
313MQ a few mes to acvate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Buon to put the
tablet in “Standby” mode while not in use. Pushing briey on the same buon
will wake up the system within seconds.
4
Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate
interface will be displayed aer a launch sequence of several seconds. The wireless
LAN connecon may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The 313Y/MD, 313MQ may be congured using the ulies and methods dictated
by the soware operang system. The 313Y/MD, 313MQ should be congurable
for various properes such as user proles, network features, and several system
elements.
Wireless Networking
Wireless LAN
The 313Y/MD, 313MQ is oen delivered with an embedded (user-inaccessible)
802.11ac WLAN adapter equipped with a hidden custom antenna.
• Through the support of typical WLAN adapters, the 313Y/MD, 313MQ should be
able to detect all 802.11 access points in the vicinity for you to select the access
point of your choice for connecon.
• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the 313Y/MD, 313MQ
and the access points have to match. The SSID is case-sensive and it is recom-
mended that you enable WEP/WPA/WPA2 encrypon (or advanced alternaves)
for secure access.
• When WEP/WPA/WPA2 is enabled, you may need to consult your network
administrator or your networking equipment literature to properly congure
associated sengs such as Authencaon mode, etc.
• Refer to the access point operang manuals for seng up the 802.11 access
points.
Bluetooth
The Bluetooth conguraon applicaon is enabled from the Windows System Tray or
from the Android Sengs APP. Follow the instrucons and opons provided within
the applicaon to congure and invoke Bluetooth connecvity with the correspond-
ing peripherals.
NOTE:
For 313MD, avoid using the Power Buon (“hold 4+ seconds” feature) to turn
o the tablet—this form of hardware shutdown is intended to be a means of
recovery from lockups, and not as normal operaon.
5
USING THE MOBILE TABLET
Peripherals Support
Through its USB ports, the 313Y/MD, 313MQ supports a wide range of USB-based
peripherals. These peripherals are applicable for soware installaon, applicaons
storage, data storage, and system soware recovery and updates.
For More Support
Users can download the Tablet Modules Basic Operaon Guides from the DT
Research website.
6
To Hold the Tablet
Le hand: grip the le back side of the tablet
with your le hand four index ngers, with
thumb resng on the top of the back side of the
tablet and palm securely against the back.
Right hand: grip the right back side of the tablet
with your right hand four index ngers, with
thumb resng on the top of the back side of the
tablet and palm securely against the back.
7
Federal Communication Commission Interference
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protecon against harmful interference in
a residenal installaon. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular
installaon. If this equipment does cause harmful interference to radio or
television recepon, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Cauon: Any changes or modicaons not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules.
Operaon is subject to the following two condions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operaon.
This device and its antenna(s) must not be co-located or operang in
conjuncon with any other antenna or transmier.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada.
This manual suits for next models
1
Other DT Research Tablet manuals
DT Research
DT Research 313Y/MD Assembly instructions
DT Research
DT Research DT395CR Assembly instructions
DT Research
DT Research DT362GL Assembly instructions
DT Research
DT Research DT300Q Assembly instructions
DT Research
DT Research DT390 Assembly instructions
DT Research
DT Research DT398 Assembly instructions
DT Research
DT Research DT340T Assembly instructions
DT Research
DT Research DT315CT Assembly instructions
DT Research
DT Research DT300Q11 Assembly instructions
DT Research
DT Research DT372 Assembly instructions
DT Research
DT Research DT311C Assembly instructions
DT Research
DT Research 302MD Assembly instructions
DT Research
DT Research DT301A Assembly instructions
DT Research
DT Research 373T/MD Assembly instructions
DT Research
DT Research 301MD Assembly instructions
DT Research
DT Research DT311YR Assembly instructions
DT Research
DT Research DT300Q01 Assembly instructions
DT Research
DT Research DT301T-TR Assembly instructions
DT Research
DT Research DT317BT Assembly instructions
DT Research
DT Research DT370CR Assembly instructions
Popular Tablet manuals by other brands
Laser
Laser MID-1060 Quick operation guide
MUNBYN
MUNBYN IRT09J Easy setup guide
Motorola
Motorola MC3090R - Win CE 5.0 Professional 520 MHz quick start guide
Dell
Dell Latitude ST Setup and features information
Lenovo
Lenovo IdeaTab S6000L Hardware Maintenance Manual
Venturer
Venturer WT9L11 quick start guide
