DSPPA DSP203N User manual
[email protected] /www.dsppatech.com The specifications will be subject to change without prior notice.
Copyright © Guangzhou DSPPA Audio Co.,Ltd. All rights reserved.
DSP203N DSP403N
Network Indoor Column Speaker
This product is a network column speaker. It is made of high-quality birch, and the speaker unit adopts
primary color seaweed salvaged pulp drum paper and full-range double-cone speaker for wider frequency
response. It is equipped with mounting bracket for easy installation.
10/100M adaptive, support DHCP/static IP settings.
Support SIP2.0 (RFC3261) and related RFCs.
Support narrowband coding: G.711a/u, wideband coding: G.722.
Use primary color seaweed salvaged pulp drum paper and full-range double-cone speaker for wider
frequency response, and clear, bright and authentic sound.
The speaker box is made of high-quality fiberboard and birch cold-pressed veneer to effectively prevent
resonant sound.
Designed with main and sub speakers.
Equipped with mounting bracket, easy to install.
DSP203N RMS 2×15W, DSP403N RMS 2×30W.
With 1 LINE IN and 1 LINE OUT.
Items
Specifications
DSP203N
DSP403N
Acoustic System
Speaker Unit
4”×2
4”×4
Sensitivity (1m, 1W)
90±2dB
94±2dB
MAX. SPL. (1m)
99±2dB
108±2dB
Frequency Response
140Hz-12KHz
140Hz-12KHz
Description
Features
Specifications
[email protected] /www.dsppatech.com The specifications will be subject to change without prior notice.
Copyright © Guangzhou DSPPA Audio Co.,Ltd. All rights reserved.
Amplifier
System
Amplifier
Rated Power (RMS)
2×15W/4Ω
2×30W/8Ω
Frequency Response
80Hz-18KHz
80Hz-18KHz
S/N Ratio
≥71dB
≥71dB
Distortion
≤1%
≤1%
LINE IN
Input Impedance
＞10kΩ
＞10kΩ
Input Sensitivity
1000mV
1000mV
LINE OUT
Output Sensitivity
1000mV
1000mV
Others
Network Interface
RJ45 (10/100M)
Audio Priority
Fire Alarm＞Paging＞Camera Trigger＞Chime＞
Timing＞Net Audio=Audio Collector＞AUX IN
Supported Protocol
DHCP, TCP/IP, UDP, ICMP, IGMP (multicast),
802.1x, HTTP, HTTPS, FTP, DNS, DDNS,
RFC3261, RTP, RTSP, RTCP, UPnP.
Power Input
~100-240V 50Hz/60Hz 1A
Dimensions (H×W×D)
390×138×120mm
682×138×120mm
Weight
3.0kg
5.0kg
Production Information
[email protected] /www.dsppatech.com The specifications will be subject to change without prior notice.
Copyright © Guangzhou DSPPA Audio Co.,Ltd. All rights reserved.
Technical Parameters
[email protected] /www.dsppatech.com The specifications will be subject to change without prior notice.
Copyright © Guangzhou DSPPA Audio Co.,Ltd. All rights reserved.
Installation (Take DSP203N for an Example)
① Assemble the bracket into two parts, A and B.
② Install 3 expansion screws in an appropriate position for installation, and fix A on the expansion screws
with nuts. (Please pay attention to the installation height! It is recommended that the height of the speaker
be 1.8m to 2m high from the ground.)
③ Attach B to the rear panel of the speaker with screws.
④ Connect B attached to the speaker to A fixed on the wall, and tighten the screw to fix it.
⑤ Connect the sub speaker, network cable, power cord, etc. as needed.
⑥ Finally, adjust the angle of the speaker, check whether the speaker is installed firmly, and complete the
installation.
This manual suits for next models
1
Other DSPPA Speakers manuals
DSPPA
DSPPA DW2235 User manual
DSPPA
DSPPA DSP8062 User manual
DSPPA
DSPPA DSP207 User manual
DSPPA
DSPPA MAG2120II User manual
DSPPA
DSPPA POE6368 User manual
DSPPA
DSPPA DSP8064B User manual
DSPPA
DSPPA DSP118 User manual
DSPPA
DSPPA DSP8063B User manual
DSPPA
DSPPA AUX166A User manual
DSPPA
DSPPA DSP1501 User manual
DSPPA
DSPPA MP30W User manual
DSPPA
DSPPA DSP6011 User manual
DSPPA
DSPPA DSP168HD User manual
DSPPA
DSPPA DSP304H User manual
DSPPA
DSPPA DSP203N User manual
DSPPA
DSPPA DSP1502 User manual
DSPPA
DSPPA POE6463B User manual
DSPPA
DSPPA MAG6364M User manual
DSPPA
DSPPA LA1521H User manual
DSPPA
DSPPA DSP643 User manual
