DSPPA MAG6311 User manual
y
Public Address System
IP Network Ceiling Speaker MAG6311
User Manual
Thank you for using our DSPPA public address system. Please read this User Manual carefully to make better use
of this equipment.
G u a n gz h o u D S P PA A u d i o Co . , L t d .
http://www.dsppatech.com
Matters needing attention
Please read the following before operating the product.
Warning
The following basic requirements must be strictly observed, to avoid potential personal injury and
equipment or property damages to you or any person nearby. The basic requirements include without
limitation to the following:
Power source/power cable
• Please disconnect the device from power source
by pulling the plug other than the power cord.
Pulling the power cord may result in damages.
• Please keep the power cord away from heat source.
Do not over-bend the power cord or place it
anywhere it can be stepped on or may cause to trip.
• This is connected to power source via the plug and
any failure or danger occurs, the user can
disconnect the device from power source by pulling
out the plug out from the socket, therefore, it is
required that the power socket should be located
somewhere with easy access.
• The device is not completely disconnected from
power source when it is switched "OFF". For sake
of safety, please disconnect the device from the
socket if it is not in user.
Positioning
• Please disconnect the device from power source
before relocating the device.
• For avoiding deformation of panels and damages
to internal components, please do NOT place the
device where there is heavy dust or violent
vibration, or where it is extremely cold or hot.
• Please keep this device off water drops or splash
or vase filled with water or any other articles of
similar nature.
Connection
• Please disconnect other equipment from power
source before they are connected to this product.
Please tune volume to its minimum level before the
device is powered ON or OFF.
• All terminals on the device marked with are
live and dangerous, and should be connected by
trained personnel.
When abnormal conditions are realized
• Please disconnect the device from power source
immediately in case the power cord is worn or
damaged or if the sound is suddenly cut off or any
abnormal odor or smoke comes out from the device,
and then have the device inspected and repaired by
professional personnel.
Precautions in Operation
• Please do NOT insert any finger into any gap or
opening of the device.
• Please prevent foreign objects (paper, plastics or
metal etc.) from being inserted or falling into any
gap or opening of the device. In such case, please
cut off power source immediately.
• Please do NOT put the body or any heavy object
on the device and do NOT operate the buttons or
switches or connections with excessive force.
Do NOT open
• Please do NOT remove the cover of the equipment,
otherwise you may get an electric shock.
• Do NOT attempt to remove any internal
component from the device, or to modify the
equipment in whatever manner. In case of any
abnormal condition, please stop using the device
immediately and have it inspected and repaired by
professional personnel.
Other Precautions
• Our company shall not be responsible for data loss
or damages due to improper use of unauthorized
modification to the device.
• The images and screen display in this Manual are
only for description and may be different from
screen images in actual operation. The screen
display depends on the product.
* * IP Network Ceiling Speaker
Content
1.Product Instruction.....................................................................................................................................................1
1.1 About MAG6311............................................................................................................................................ 1
1.2 Functional Features.........................................................................................................................................1
2. Description of Appearance........................................................................................................................................2
2.1 Description of side panel................................................................................................................................ 2
3. Connection Diagram................................................................................................................................................. 3
3.1 MAG6311 application diagram in system......................................................................................................3
3.2 MAG6311 connection diagram of interface...................................................................................................4
3.3 DATA interface instruction............................................................................................................................. 5
4. IP Address Setting.....................................................................................................................................................6
5. Operation Instruction................................................................................................................................................ 8
Packing List.................................................................................................................................................................11
Specification................................................................................................................................................................11
* * IP Network Ceiling Speaker
1
1.Product Instruction
1.1 About MAG6311
MAG6311 IP network ceiling speaker is a network of all-digital analog-digital conversion signal processor
based on the TCP / IP transmission protocol. With dual network port design, it can be attached to any place that
the network can reach. Remote audio data stream can be output through the machine audio signal with the host
intelligent control; built-in MP3 player, with a USB interface and SD card jack, can play the MP3 program when
not playing the network audio stream signal; can implement the schedule point off the host; there is 1-channel
auxiliary audio input interface to connect other audio devices (such as DVD player), and 1-channel auxiliary
audio output interface connect other amplifiers to extend the power; the machine also has 1-channel microphone
interface to realize local paging and so on.
1.2 Functional Features
Dual network port design, can work across the network segment;
Can be attached to any place where the network access;
With MP3 decoding play function;
Support max 48kHz sampling rate 16bit digital audio stream decoding;
Built-in 2 × 15W digital amplifier, low power settings.
Can play the background music, emergency paging, alarm signals etc. from the system host;
With 1-channel auxiliary audio input interface, 1-channel auxiliary audio output interface, 1-channel
microphone input and 1-channel EMC emergency output interface, 1-channel short circuit output.
Local output volume and local play status are controllable.
* * IP Network Ceiling Speaker
2
2.Description of Appearance
2.1 Description of side panel
1．Power supply interface
Supply working power for the device.
2．Speaker
Built-in 2 × 15W digital amplifiers, the output of the power is 15W respectively. Connect two fixed
resistance (4Ω) speakers respectively.
3．EMC override play output
The output signal of this interface is controlled by the host.
4．AUX OUT
Connect other amplifiers to extend the power of this terminal.
5．AUX IN
Connect audio devices (such as DVD players) to extend audio sources.
6．MIC2 microphone interface
Connect the microphone to realize the local paging or live speech functions.
7．DATA
Extend the interface, the connection method as shown below(Figure 3.3). (Note: this port is not allowed to
connect to the network switch. Otherwise it will burn the device!)
8．LAN1/LAN2
Dual network ports design, connect the network switch..
9．USB Disk
Insert U disk or memory devices such as a mobile hard disk on which the MP3 program is stored, it can
provide audio source for the built-in MP3 player.
10．Micro SD
Insert SD card with the host schedule at the jack, and provide the audio for schedule point when the terminal
is offline.
LAN2LAN1 Micro SDUSB Disk
Data
(注意:此端口不允许连接网
络交换机,否则会烧毁设备!)
MIC2
DC +15V
AUX IN
COM
+15V
SC
COM
SP+
SP-
SP-
SP+
1367
8 9 10
24 5
* * IP Network Ceiling Speaker
3
3.Connection Diagram
3.1 MAG6311 application diagram in system
Note：
1.In the above figure only focus on the connection instruction of MAG6311 approximate application, the whole
system connection please refer to the network control host's instruction manual.
2.The above figure is for illustrative purposes only, please refer to the system connection diagram.
3.MAG6311 terminal in the system must be connected through the network switch, and set the appropriate address
and then can be connected with the host.
Other devices
Other network or
devices
Host
Ethernet
Terminal
Terminal
Terminal
Terminal
* * IP Network Ceiling Speaker
4
3.2 MAG6311 connection diagram of interface
In addition to the built-in MP3 player and a network source, the terminal also has 1-channel auxiliary output
to connect other sources and amplifiers. The personalized design of the unit can meet the needs of the terminal site
of high power and multi-source. In the absence of such a personalized needs of the application it can disconnect
the peripheral audio source and other amplifiers; the built-in MP3 player and network audio stream can meet the
majority of public places.
The connection diagram is shown as below:
LAN2LAN1 Micro SDUSB Disk
Data
(注意:此端口不允许连接网
络交换机,否则会烧毁设备!)
MIC2
DC +15V
AUX IN
COM
+15V
SC
COM
SP+
SP-
SP-
SP+
MIC
AUX IN
COM
+15V
SC
COM
SP+
SP-
SP-
SP+
Connect two 4Ω, 15W constant resistance speakers
Note: The diameter range of the connecting speaker wire
(20AWG-22AWG)
Ethernet switch
Power amplifier
CD player
* * IP Network Ceiling Speaker
5
3.3 DATA interface instruction
Note:
(1) 8-bit dedicated data plug, respectively, from top to bottom : ①OUT +, ②OUT-, ③IN +, ④B, ⑤A, ⑥IN-,
⑦+14 V, ⑧COM.
(2)where ①feet and ②feet are analog audio differential output; ③feet and ⑥feet are analog audio differential
input; ④feet and ⑤feet are 485 communication interface output; ⑦feet are 14V output; ⑧feet are ground wire.
LAN2LAN1 Micro SDUSB Disk
Data
(注意:此端口不允许连接网
络交换机,否则会烧毁设备!)
MIC2
DC +15V
AUX IN
COM
+15V
SC
COM
SP+
SP-
SP-
SP+
8位数据插头
8-bit data plug
* * IP Network Ceiling Speaker
6
4.IP Address Setting
The IP network ceiling speaker can be customized to modify the network parameters, if you want to use this
function, please read this section:
Method 1:
1. Modify the configuration of the computer's IP address, requiring the IP of the configured computer and
network indoor ceiling speaker address on the same network segment; such as indoor ceiling speaker’s IP address
for 192.168.40.5, then the IP of the configured computer is set to 192.168.40.252, (Note: the setting IP can not
appear IP conflict phenomenon);
2. After the connection of host and indoor ceiling speaker, set the IP address on the label of the indoor ceiling
speaker in the host IE browser, and you can enter the following (Figure 1) shown;
3. In the "Network Configuration" column to modify the IP address or server address and click "confirm the
changes" to save the changes successfully.
Figure 1
* * IP Network Ceiling Speaker
7
Method 2:
1. Enter the host software "Settings" -> "System Maintenance" -> "Device Maintenance"
2. Find the IP address of the indoor ceiling speaker label, select and click Modify.
3.As (Figure 2) below, modify the parameters and click OK to see the interface shows success.
Figure 2
Table of contents
Other DSPPA Speakers manuals
DSPPA
DSPPA DSP8062 User manual
DSPPA
DSPPA IP Speaker User manual
DSPPA
DSPPA DSP8063B User manual
DSPPA
DSPPA DSP304H User manual
DSPPA
DSPPA DSP207 User manual
DSPPA
DSPPA MAG6378 User manual
DSPPA
DSPPA DSP2612B User manual
DSPPA
DSPPA FP-808 User manual
DSPPA
DSPPA MP30W User manual
DSPPA
DSPPA DSP5505R User manual
