DSC IMPASSA Instruction Manual

Other manuals for IMPASSA

2

Table of contents

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual

panels, keypads & modules

Contact your DSC distributor.

www.dsc.com | 1-888-888-7838

IMPASSA

Self-Contained 2-Way Wireless Security System

Quick-Start Installation Guide

1. Remove the Front Plate

Using a small screwdriver, insert in the bottom left and right-hand slots and

gently pry to separate the front panel.

2. Mount the Back Cover

Begin by routing telephone line wiring, Input/Output wiring and AC power

wiring through the cutout in the back cover. Determine placement location

and mount the back cover to the wall using the screws and drywall plugs.

Note: For versions supporting cellular communications, the cellular signal

strength can be ﬁrst checked in section [850], to determine the optimal

location to mount the unit.

3. Connect Wiring

Connect wiring to the terminal block on the back cover.

4. Connect the Battery

Connect the battery cable to the connector on the PCB, ensuring proper

orientation of the connector.

5. Attach the Front Cover

Place the top portion into the back cover ﬁrst and press the bottom portion

into the back cover to snap into place.

Artwork PN 30001315 / Manufacturing PN 29008215R001

6. Power Up the System

Apply power by plugging in the transformer.

8. Template Programming

The functions required for basic operation of the IMPASSA system can be

conﬁgured (4-digit code) quickly through the use of template programming in

section [899]. Code prompts exist for pre-deﬁned zone deﬁnitions, reporting

code formats, communication call directions and DLS setup. Once the code

has been programmed, you will be prompted to enter the monitoring station

telephone number and account code, DLS access code, entry and exit

delays, and the installer code.

7. Enrol Wireless Devices

Using the quick enrol feature found in section [898], wireless devices can be

enrolled into the IMPASSA system easily.

9. Perform Placement Testing

The proposed placement of each wireless device should be tested before it is

mounted by entering section [904]-[907]. Testing the signal strength between

IMPASSA and the wireless devices can be accomplished in a group (global

placement test) or individuals.

10. Cellular Conﬁguration

a. Prior to system installation, ensure the SIM card has been activated

with Connect24 (C24 Communications)

b. Conﬁgure the communications phone numbers in section [301]-[303]

and [305] to the desired conﬁguration

c. Conﬁrm the cellular communicator module by programming panel

section [382] option [5] as ON

d. Conﬁrm panel section [401] option [1] as ON in order to perform

DLS sessions through cellular

panels, keypads & modules For product information

www.dsc.com

Product speciﬁcations and availability subject to change without

notice. Certain product names mentioned herein may be trade

names and/or registered trademarks of other companies.

©2011 2011-08