DSC PC5964 User manual

Table of contents

Other DSC Security System manuals

Popular Security System manuals by other brands

Inner Range

Inner Range Concept 2000 user manual

Climax

Climax Mobile Lite R32 Installer's guide

CADDX

CADDX NX-6 user manual

FBII

FBII XL-31 Series installation instructions

Johnson Controls

Johnson Controls PENN Connected PC10 Install and Commissioning Guide

Aeotec

Aeotec Siren Gen5 quick start guide

Blaupunkt

Blaupunkt SA 2700 quick start guide

IDEAL

IDEAL Accenta Engineering information

AJAX

AJAX DoubleButton user manual

Swann

Swann SW-P-MC2 Specifications

Ecolink

Ecolink Siren+Chime user manual

Digital Monitoring Products

Digital Monitoring Products XR150 user guide

EDM

EDM Solution 6+6 Wireless-AE installation manual

Highway Safety Group

Highway Safety Group EA401 user manual

Siren

Siren LED GSM operating manual

Detection Systems

Detection Systems 7090i Installation and programming manual

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 instructions

Siemens

Siemens FDM273 manual

This instruction sheet shall be used in conjunction with the associated Audio Module Installation Manual.

Mounting Instructions

1. If required, remove the front cover from the backplate as follows:

a. Insert a small slotted screw driver in one of the slots indicated in Fig 1.

b. Gently pry the cover from the backplate.

c. Repeat this operation on the remaining slot. Lift cover free of backplate.

2. Determine the desired location and mounting method (A, B, C or D surface-mount)

3. (a) For A, B or C (Fig. 2) mounting methods, position the backplate over the electrical box

ensuring free access to wiring. Then mark the screw locations indicated for the chosen

mounting method.

(b) For D mounting (surface mount) remove the wiring access flange on the side of the back-

plate. Position the backplate in the desired location then mark the screw locations at the 4

corners of the backplate.

CAUTION!: DSC recommends the use of wall anchors when mounting directly onto a wall.

4. Route wiring as required.

5. Secure backplate to wall using the appropriate hardware.

6. Wire unit in accordance with the associated Audio Module instructions.

7. Place front cover over backplate. Gently press until cover locks in place with an audible click.

8. Power up system then verify operation.

PC5964 Audio Station Mounting Instructions

2. Push down to open

3. Repeat steps 1

and 2 for this side.

1. Insert

screwdriver

Figure 1

A

A

AA

C

C

B

B

D

DD

D

A- Single/Double

Gang Box

B- Octagonal Box

C- European Wall/

Ceiling Box

Wiring Flange

Figure 2

©2007 Digital Security Controls, Toronto, Canada

www.dsc.com • 1-800-387-3630 (Canada, US), 905-760-3036

Printed in Canada

29007411R002

This instruction sheet shall be used in conjunction with the associated Audio Module Installation Manual.

Mounting Instructions

1. If required, remove the front cover from the backplate as follows:

a. Insert a small slotted screw driver in one of the slots indicated in Fig 1.

b. Gently pry the cover from the backplate.

c. Repeat this operation on the remaining slot. Lift cover free of backplate.

2. Determine the desired location and mounting method (A, B, C or D surface-mount)

3. (a) For A, B or C (Fig. 2) mounting methods, position the backplate over the electrical box

ensuring free access to wiring. Then mark the screw locations indicated for the chosen

mounting method.

(b) For D mounting (surface mount) remove the wiring access flange on the side of the back-

plate. Position the backplate in the desired location then mark the screw locations at the 4

corners of the backplate.

CAUTION!: DSC recommends the use of wall anchors when mounting directly onto a wall.

4. Route wiring as required.

5. Secure backplate to wall using the appropriate hardware.

6. Wire unit in accordance with the associated Audio Module instructions.

7. Place front cover over backplate. Gently press until cover locks in place with an audible click.

8. Power up system then verify operation.

PC5964 Audio Station Mounting Instructions

2. Push down to open

3. Repeat steps 1

and 2 for this side.

1. Insert

screwdriver

Figure 1

A

A

AA

C

C

B

B

D

DD

D

A- Single/Double

Gang Box

B- Octagonal Box

C- European Wall/

Ceiling Box

Wiring Flange

Figure 2

©2007 Digital Security Controls, Toronto, Canada

www.dsc.com • 1-800-387-3630 (Canada, US), 905-760-3036

Printed in Canada

29007411R002