Draper 28357 User manual
28357
EN
Original Instructions
Version 1
5 PIECE
AIR TOOL KIT
1. Preface
– 2 –
These are the original product instructions. This
document is part of the product; retain it for the life
of the product, passing it on to subsequent holders.
Read this manual in full before attempting to
assemble, operate, or maintain this product.
This Draper Tools manual describes the purpose
of the product and contains all the necessary
information to ensure its correct and safe use.
Following all the instructions and guidance in
this manual will ensure the safety of both the
product and the operator and increase the
lifespan of the product.
All photographs and drawings within this manual are
supplied by Draper Tools to help illustrate correct
operation of the product.
Every eort has been made to ensure the
information contained in this manual is accurate.
However, Draper Tools reserves the right to amend
this document without prior warning. Always use the
latest version of the product manual.
1.1 Product Reference
User Manual for: 5 Piece Air Tool Kit
Stock No: 28357
Part No: DAT-ATK5
1.2 Revisions
Version 1: June 2022
First release
As our manuals are continually updated, always ensure
that the latest version is used.
Download the latest version from:
drapertools.com/manuals
1.3 Understanding the Safety Content
WARNING! – Situations or actions that may result
in personal injury or death.
CAUTION! – Situations or actions that may result
in damage to the product or surroundings.
Important – Information or instructions of particular
importance.
1.4 Copyright © Notice
Copyright © Draper Tools Limited.
Permission is granted to reproduce this manual for
personal and educational use ONLY. Commercial
copying, redistribution, hiring, or lending is strictly
prohibited.
No part of this manual may be stored in a retrieval system
or transmitted in any other form or means without written
permission from Draper Tools Limited.
In all cases, this copyright notice must remain intact.
2. Contents
– 3 –
EN
1. Preface 2
1.1 Product Reference 2
1.2 Revisions 2
1.3 Understanding the Safety Content 2
1.4 Copyright © Notice 2
2. Contents 3
3. Warranty 4
4. Product Introduction 5
4.1 Scope 5
4.2 Specication 5
5. Health and Safety Information 6
5.1 General Health and Safety Precautions 6
5.2 Additional Safety Instructions for Air Tools 6
6. Identication and Unpacking 8
6.1 Product Overview 8
6.2 What’s in the Box? 10
6.3 Packaging 10
7. Preparation Instructions 11
7.1 Preparing the Air Supply for Use with All
Tools 11
7.2 Cleaning the Paint Spray Gun Before First
Use 12
7.3 Cleaning the Cleaning Gun, Air Gun and
Tyre Inator Before First Use 12
7.4 Assembly, Filling and Connection to the
Air Supply 12
8. Operating Instructions: Paint Spray Gun 14
8.1 The Fluid Control Dial 14
8.2 The Spray Control Dial 14
8.3 The Air Cap 14
8.4 The Trigger 15
8.5 Notes on Use 15
9. Operating Instructions: Cleaning Gun 16
9.1 The Nozzle 16
9.2 The Trigger 16
9.3 After Use 16
10. Operating Instructions: Air Gun and
Tyre Inator 17
10.1 Air Gun 17
10.2 Tyre Inator 17
11. Maintenance and Troubleshooting 19
11.1 General Maintenance 19
11.2 Cleaning the Paint Spray Gun 19
11.3 Cleaning the Cleaning Gun 20
11.4 Cleaning the Air Gun and Tyre Inator 20
11.5 Storing the Tools 20
11.6 Troubleshooting 21
12. Returns and Disposal 24
13. Explanation of Symbols 25
3. Warranty
Draper Tools products are carefully tested and inspected
before shipment and are guaranteed to be free from
defective materials and workmanship.
Should the tool develop a fault, return the complete tool
to your nearest distributor or contact Draper Tools
directly. Contact information can be found at the back of
this manual.
Proof of purchase must be provided.
If, upon inspection, it is found that the fault occurring is
due to defective materials or workmanship, repairs will
be carried out free of charge.
This warranty period covers
parts and labour for six months from the date of purchase.
Where tools have been hired out, the warranty period
covers 90 days from the date of purchase.
This warranty does not apply to any consumable parts,
batteries or normal wear and tear, nor does it cover any
damage caused by misuse, careless or unsafe handling,
alterations, accidents, or repairs attempted or made by
any personnel other than the authorised Draper Tools
repair agent.
In all cases, to make a claim for faulty workmanship or
materials within the standard warranty period, please
contact or return the product to the place of purchase.
Proof of purchase may be required.
If the place of purchase is no longer trading or if you
experience any diculties with your warranty, please
contact Customer Services with the product details and
your proof of purchase. Contact details can be found at
the back of this manual.
If the tool is not covered by the terms of this warranty,
repairs and carriage charges will be quoted and charged
accordingly.
This warranty supersedes any other guarantees
expressed or implied and variations of its terms are not
authorised.
Your Draper Tools guarantee is not eective until you can
produce, upon request, a dated receipt or invoice to
verify your purchase within the guarantee period.
Please note that this warranty is an additional benet
and does not aect your statutory rights.
Draper Tools Limited
– 4 –
4. Product Introduction
– 5 –
EN
4.1 Scope
This product contains four air tools and an air hose and is
designed for use with receiver compressors.
The gravity-fed paint spray gun is suitable for use with all
types of paint, including water-based paints, for
light-viscosity painting applications.
The cleaning gun is suitable for use with degreasing and
cleaning agents and detergents, and is intended for
removing dirt, grease and oil from engines and
machinery.
The air gun is intended for cleaning with compressed air
and clearing blockages from small spaces.
The tyre inator is intended for inating tyres. Always
double-check tyre pressure against a BS 4613-compliant
tyre pressure gauge after use.
The air hose is intended for the connection and
extension of 1/4" air lines.
Part of our core range, this product is suitable for regular
use by enthusiasts and tradespersons alike.
WARNING! This product is not a toy and must
be respected.
Read this manual in full before attempting to assemble,
operate or maintain the product, and retain it for later use.
4.2 Specication
Stock No. 28357
Part No. DAT-ATK5
Paint spray gun:
Nozzle 1.5mm
Cup capacity 500ml
Operating air pressure 3–4bar (43–58psi)
Max. air pressure 4.5bar (65psi)
Air inlet 1/4" BSP
Net weight 0.415kg
Operating air pressure 0–8bar (0–116psi)
Max. air pressure 9bar (130psi)
Air inlet 1/4" BSP
Gauge diameter 64mm
Scale colour (bar) Black
Scale colour (psi) Red
Hose inlet 1/4” BSP
Hose length 0.36m
Net weight 0.279kg
Cleaning gun:
Nozzle 3mm
Cup capacity 900ml
Operating air pressure 4–8bar (58–116psi)
Max. air pressure 9bar (130psi)
Air inlet 1/4" BSP
Net weight 0.408kg
Air gun:
Max. air pressure 8.0bar (116psi)
Air inlet 1/4" BSP
Net weight 0.123kg
Air hose:
Inner diameter 5mm
Outer diameter 8mm
Length 5m
Max. air pressure 8bar (116psi)
Net weight 0.216kg
Kit net weight 1.68kg
5. Health and Safety Information
– 6 –
EN
Important: Read all Health and Safety instructions
before attempting to operate, maintain or repair this
product. Non-compliance with these instructions may
result in injury or damage to the user or the product.
5.1 General Health and Safety
Precautions
• Only authorised personnel who have carefully read
and understood this manual may operate, adjust and
repair this product.
• Observe all standard safety precautions and good
practices when working with air tools.
• Always wear adequate eye protection and a face mask
when using this product.
− Some products suitable for use with this product
may contain chemicals or toxic components.
− Avoid inhalation or contact with materials used
with this product.
− If contact occurs, seek medical advice as soon as
possible.
• Wear ear defenders and protective gloves while using
and cleaning this product.
• Keep your work environment clear and well-lit, with
bystanders at a safe distance.
• Use this product ONLY in well-ventilated areas to
avoid the build-up of fumes and allow paint particles
to disperse.
• Keep out of reach of children.
• Before every use, inspect the tools for missing,
broken, loose or corroded parts.
Important: DO NOT use this product if it is damaged
in any way. Contact Draper Tools to discuss repair and
replacement options.
• Ensure that all accessories and attachments are
securely tightened before use.
• Use the product only in the manner instructed in this
manual.
• DO NOT modify this product in any way.
• ONLY use spare parts supplied by Draper Tools.
• Stay alert at all times; DO NOT use this product while
tired or under the inuence of alcohol, drugs or other
medication.
• NEVER insert foreign objects into the nozzles of these
tools unless cleaning them with a soft brush.
5.2 Additional Safety Instructions for Air
Tools
• Compressed air can cause severe injury.
− ALWAYS turn o and disconnect the air supply
before making any adjustments to the product or
leaving it unattended.
− NEVER direct this product towards yourself or
others.
− NEVER direct compressed air jets towards objects
that contain combustible or hazardous
substances.
− Protect live components from dust and debris
blown by compressed air.
− Ensure that compressed air is not blocked by or in
contact with any part of your body.
• ONLY use clean, dry and regulated compressed air.
WARNING! NEVER use oxygen, combustible
gases or other bottled gasses as a supply for
this product. Use of these substances may
cause the product to explode.
• Use of a whip hose between the tools and the air
supply is recommended to reduce vibration.
CAUTION! Whipping hoses can cause severe
injury. Always check for and replace
• Ensure that the product is compatible with the air
supply before use.
• Ensure all connections are securely tightened.
• DO NOT exceed the maximum stated air pressure for
each tool.
− The pressure of the connected air supply MUST
NOT exceed more than 10% of the rated pressure
of the product.
• DO NOT obstruct the ability of the trigger to release
once depressed.
• NEVER cover the tool nozzle while the trigger is
depressed.
• NEVER carry the tool by the hose.
• Some parts of the tools may become hot during use.
− Allow the nozzles and cups to cool after use before
handling or adjusting them.
• NEVER spray ammable substances near open ames
or sources of heat and ignition.
− DO NOT smoke in the vicinity of this product.
5. Health and Safety Information
– 7 –
EN
• NEVER spray solvents, solvent-based liquids, acetone
or undiluted acids using the cleaning gun.
− Spray mist from these substances is very
dangerous and may be explosive.
• ONLY use biodegradable sprays with the cleaning gun
and clean the tool immediately after use.
WARNING! Blowing out of blind or narrow openings
may cause excessive noise. ALWAYS ensure
appropriate ear protection is worn during use.
• ALWAYS double-check tyre pressure against a
BS 4613-compliant tyre pressure gauge after
ination.
• DO NOT use these tools in temperatures that do not
fall within 0–40°C.
WARNING! The use of solvents that contain
halogenated hydrocarbons in pressurised
systems with aluminium or galvanised parts may
cause chemical reactions that result in an
explosion. This product contains components
halogenated hydrocarbons.
DO NOT use halogenated hydrocarbons with
this product. Many halogenated hydrocarbons
6. Identication and Unpacking
6.1 Product Overview
– 8 –
EN
Paint spray gun
(1) Air cap
(2) Air cap locking ring
(3) Fluid control dial
(4) Fluid needle
(5) Hanging loop
(6) Nozzle
(7) Spray control dial
(8) Spray direction control
(9) Spray gun air line inlet
(10) Spray gun paint cup
(11) Spray gun trigger
Air gun
(18) Air gun air line inlet
(19) Air nozzle
(20) Air gun trigger
(2)
(7)
(6)
(11)
(1)
(3)
(5)
(9)
(10)
(18)
(20)
(19)
(8)
(4)
6. Identication and Unpacking
– 9 –
EN
(21) Exhaust button
(22) Inator air line inlet
(23) Inator hose
(24) Inator trigger
(25) Pressure gauge
(26) Valve coupling
(27) Valve coupling catch
Cleaning gun
(12) Cleaning gun air line inlet
(13) Cleaning gun suction cup
(14) Cleaning gun trigger
(15) Hanging loop
(16) Nozzle
(17) Nozzle locking nut
(12)
(15)
(13)
(16)
(14)
(17)
(22)
(27)
(26)
(24)
(23)
(25)
(21)
6. Identication and Unpacking
Please visit drapertools.com for our full range of accessories and consumables.
– 10 –
EN
6.2 What’s in the Box?
Carefully remove the product from the packaging and
examine it for any signs of damage that may have
occurred during shipment.
Before assembling the product, lay the contents out and
check them against the parts shown below. If any part is
damaged or missing, do not attempt to use the product.
Please contact the Draper Helpline; contact details can
be found at the back of this manual.
6.3 Packaging
Keep the product packaging for the duration of the
warranty period for reference should the product need to
be returned for repair. WARNING! Keep packaging materials out of
reach of children. Dispose of packaging
correctly and responsibly and in accordance
with local regulations.
(A) 1 x Paint spray gun
(B) 1 x Cleaning gun
(C) 1 x Air gun
(D) 1 x Tyre inator
(E) 1 x 5m air hose (5mm inner Ø)
(F) 1 x Paint cup
(G) 1 x Suction cup
(H) 1 x Tyre inator hose
(I) 1 x 1/4" BSP air line coupling
(A)
(F)
(I)
(B)
(G)
(D)
(C)
(H)
(E)
Table of contents
Other Draper Tools manuals
Draper
Draper PTF User manual
Draper
Draper 4314K User manual
Draper
Draper GPAUG52-B User manual
Draper
Draper 50094 User manual
Draper
Draper STORMFORCE 65142 User manual
Draper
Draper Expert 19106 User guide
Draper
Draper PJSK User manual
Draper
Draper 1180 User manual
Draper
Draper 18745 User guide
Draper
Draper 98421 User manual
Draper
Draper 17819 User guide
Draper
Draper GPAUG52-B User manual
Draper
Draper DTK-FORD 52576 User manual
Draper
Draper 5295 User manual
Draper
Draper 17609 User guide
Draper
Draper P5 User manual
Draper
Draper ALG33 User manual
Draper
Draper 18495 User guide
Draper
Draper 19525 User manual
Draper
Draper 27118 User guide
