DeWalt Compact SDS+ D25012K User manual
H
H
D25032 to D25263K
Combination Hammers
H
H
OPP
Short Stack Motor
MPP
Medium Stack Motor
HPP
Long Stack Motor
Modular Conception
H
H
22 mm OPP Hammer Durable 710 Watt
short stack motor
20 mm Ram
15,5 mm stroke
wobble bearing
Jam pot
housing
H
H
26 mm MPP Hammer durable 800 Watt
medium stack motor
20 mm ram
18,9 mm strocke
wobble bearing
jam pot
housing
H
H
28 mm HPP Hammer durable 900 Watt
long stack motor
22 mm ram
22,0 mm strocke
wobble bearing
jam pot
housing
non pumping
beat pice
H
H
New Range - Visual Differentiation
26mm22mm 28mm
Plastic rear
handle Rubber grip
rear handle
Rubber grip
side handle
Rubber grip
rear handle
Rubber grip
side handle
Silver panel
Side handle
light
H
H
Before repair and service
Follow the
safety instructions
H
H
Before attempting any repairs, the following should be observed,
Ensure that the correct tool is used and only use good quality hand tools
Ensure the work shop is clean and tidy.
Always wear protective clothing, Overalls, safety gloves, safety glasses, safety hat/net etc.
Check condition of cord and plug.
Check that guards function correctly, if not repair before running the product.
Before turning product on for analysis carry out a visual check for loose/broken parts including accessories, drill
bits, chisels, cutters etc.
Never repair a product whilst it is plugged into a power supply, or a battery is connected.
Remove accessories, drill bits, chisels, cutters etc.
Release tension on parts before attempting to remove, for example arm springs.
Where fitted, ensure side handles function correctly.
After repair
Carry out Earth continuity, Earth leakage and Insulation test (flash test) where appropriate.
Ensure all guards function correctly.
Run product to check that it functions correctly, including all features.
Before attempting any necessary adjustments, ensure that the unit is not connected to the power supply.
Where fitted, ensure side handles function correctly.
H
H
ENGLISH GERMAN ITALIAN FRENCH SPANISH PORTUGUESE DUTCH
CHECK ÜBERPRÜFEN CONTROLLARE CONTROLER COMPROBAR VERIFIQUE CONTROLEREN
ATTENTION ! ACHTUNG ! ATTENZIONE ! ATTENTION ! ATENCION ! ATENÇÃO! ATTENTIE !
TURN COUNTER
CLOCKWISE DREHEN GEGEN
UHRZEIGERSINN GIRARE IN SENSO
ANTIORARIO
TOURNEZ DANS LE
SENS INVERSE DES
AIGUILLES D’UNE
MONTRE
GIRO IZQUIERDA GIRAR SENTIDO ANTI-
HORARIO DRAAI LINKSOM
TURN
CLOCKWISE DREHEN IN
UHRZEIGERSINN GIRARE IN SENSO
ORARIO
TOURNEZ DANS LE
SENS DES AIGUILLES
D’UNE MONTRE GIRO DERECHA GIRAR NO SENTIDO
HORARIO DRAAI RECHTSOM
MOVE IN THIS
DIRECTION IN RICHTUNG
BEWEGEN MUOVI IN DIREZIONE BOUGEZ DANS CETTE
DIRECTION DIRECION DE LA
FLECHA AVANÇAR NESSA
DIREÇAO BEWEEG IN DE
RICHTING VAN DE PIJL
CORRECT RICHTIG CORRETTO CORRECT CORRECTO CORRECTO GOED
NOT CORRECT NICHT RICHTIG NON CORRETTO INCORRECT NO ES CORRECTO NÃO É CORRECTO FOUT
LIFT OVER ANHEBEN SOLLEVARE SOULEVEZ LEVANTAR LEVANTAR SOBRE A OPHEFFEN
Other manuals for Compact SDS+ D25012K
1
This manual suits for next models
10
Other DeWalt Tools manuals
DeWalt
DeWalt DCS353 User manual
DeWalt
DeWalt DCS551 User manual
DeWalt
DeWalt D25872 User manual
DeWalt
DeWalt D25940K User manual
DeWalt
DeWalt DXCM024-0400 User manual
DeWalt
DeWalt D512753 User manual
DeWalt
DeWalt DE6242 User manual
DeWalt
DeWalt DCGG571B User manual
DeWalt
DeWalt D25951 User manual
DeWalt
DeWalt SDS MAX D25712 User manual
DeWalt
DeWalt D512566 User manual
DeWalt
DeWalt DWHT10035L User manual
DeWalt
DeWalt D25333 User manual
DeWalt
DeWalt DCGG571 User manual
DeWalt
DeWalt DWDCGG571 User manual
DeWalt
DeWalt DE0734 User manual
DeWalt
DeWalt D25872 User manual
DeWalt
DeWalt P35s User manual
DeWalt
DeWalt DCW600 User manual
DeWalt
DeWalt DC550 User manual
