DELTA DORE DRIVER 230 CPL User manual

DRIVER 230 CPL

User guide

3 zone weekly programmer using power

line carriers

*2702030_rev1*

DELTA DORE - Bonnemain

35270 COMBOURG - FRANCE

E-mail : deltadore@deltadore.com

Device complying with the requirements of the directives:

2004/108/EEC (electromagnetic compatibility) and

2006/95/EEC (low voltage safety).

Description . . . . . . . . . . . . . . . . . . . . . . . . . 3

Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . 5

The Pilot Wire . . . . . . . . . . . . . . . . . . . . . . . 5

Comfort, Economy, Frost Protection . . . . . . . . 6

Automatic mode . . . . . . . . . . . . . . . . . . . . . . 6

Change the programming . . . . . . . . . . . . . . . . 7

Comfort or Economy Override . . . . . . . . . . . . 8

Shutdown mode . . . . . . . . . . . . . . . . . . . . . . 8

Adjustable frost protection . . . . . . . . . . . . . . 9

Remote controlled absence mode . . . . . . . . .10

Domotic functions (if radio option)

with a door/window magnetic contact.......................... 11

with a TYXIA Transmitter ............................................. 11

with a TYDOM 200 remote control.............................. 12

with a TYDOM 300 telephone transmitter ................... 13

with a TYXAL alarm control unit............................. 13-14

- 3 -

Because of changes in standards and equipment, the characteristics given in the text and

the illustrations of this document are not binding unless confirmed by Delta Dore.

DescriptionContents

Timed absence button or validation

in programming mode

Time

Tariff reduction in progress

Current day

Current mode: Comfort

Modification or override buttons

Knobselection mark

Identification of the heating zone

Economy

12 3

Comfort Economy

Frost Protection

Automatic mode

Starting up

Programming

Shutdown

The pilot wire principle enables the required operating mode

for the heating element to be selected from the programming

control unit.

The corresponding temperature is set directly by the heating

element thermostat (room by room control).

• Heating Programming

- 1 customizable program per day and per zone

- Automatic mode override:

It is possible to use a different operating mode (Comfort,

Economy, etc.) from the current one, until the next change

of program

- Absence:

Constant or timed (from 1 to 99 days) to set

the installation to frost protection mode

• Transmission by power line carrier

- No damage to the existing installation

- Use with pilot wire receivers of the X2D PLC range

- Compatible with an energy manager

(e.g. GECPL1, GP4 CPL)

- Upgradeable system

• Tariff Management

- Linked with a CPL X2D energy manager (e.g. GECPL1

or GP4 CPL), it can reduce your energy consumption

according to the current tariff period

- Compatibility with all tariffs

• Radio Option

-DRIVER CPL is compatible with the TYDOM 520 radio

module that is used to associate domotics functions:

door/window magnetic contact, alarm control unit, etc.

- 5 -- 4 -

The Pilot Wire

Time SettingDescription

Press and release: slow forward.

Press and hold: fast forward.

Turn the

selector to

Each time youpass 0.00 youchange the day

Command sent by

the control unit Correspondingtemperature

on the heatingelement

Comfort Comfort setting (thermostat knob)

Economy Economy setting or -2°C or -3°C in relation

to the comfort setting (according to the model)

Frost Protection Frost protection set to 7°C or 8°C

(depending on model)

Shutdown Heating shutdown

Permanent comfort

Continuous Economy mode

Continuous Frost Protection

- 7 -- 6 -

Change the programmingComfort, Economy or Continuous Frost

Protection

Automatic Mode

Turn

the selector to

Z2 Z3Z1

Turn

the selector to

Z2 Z3Z1

Turn

the selector to

Z2 Z3Z1

Turn

the selector to AUTO

The unit followsthe program for the three zones.

Z2 Z3Z1

Turn the selector

to PROG Z1.

The 1st time slot flashes on and off.

E.g.Comfort from 6.00 am to 9.00 am

from 12am to 2pm,

from 6pm to 11pm.

The programming uses

slotsof one hour.

Press the buttons

+ (comfort) or - (economy)

to set each time slot.

Confirm and go to

the next day.

Repeat for each day.

Change the position selector to exit the mode.

Comfort for

1 hour

Economy for

1 hour

Holding down the OK button letsyouallocate the same

program as the previously programmed day to the following day.

To modify the program of zones2 or 3, turn the knobto PROG Z2

or PROG Z3and repeat the stepsabove.

Z2 Z3Z1

- 9 -- 8 -

Note: If you are using 6-order pilot wire, override takes

place amongst 4 modes:

Adjustable frost protection

(1 to 99 days) - Absence mode

Heating shutdown

Override with automatic return

(comfort or economy mode)

The selector isset to AUTO

The unit followsthe program

(e.g.comfort in zone 1 and

economy in zone 2 and 3)

For azone 2 or 3override,

press or .

On zone 1, the unit operates

in Economy mode until the next

program change.

Press .

Z2 Z3Z1

Turn the

selector to

Z2 Z3Z1

From the AUTO mode.

Set the number of daysof

absence with the + or - buttons,

the suitcase symbol flashes.

The countdown begins.

Example: leaving on 10 January, returning on 19 January,

indicate 9 days.

Automatic operation will resume on 19 January

at 0:00 a.m.

Press for approximately

3 secondsuntil the suitcase

symbol displays

(continuousabsence).

Comfort

Economy

Comfort -2˚C

Comfort -1˚C

- 13 -- 12 -

- TYPHONE 2 + GECPL1 :

Setting the absence mode

Before leaving the dwelling, confirm your

absence on the telephone remote control.

"tELE" is displayed.

➀Return to normal operation

Order the termination of absence mode either remotely or

locally (on the telephone remote control).

The operation

reverts to the one shown by the knob position.

- TYPHONE 2 CPL:

Setting the absence mode

Remotely, send the absence command.

The screen of the DRIVER CPL displays the

suitcase and telephone symbols.

➀Return to normal operation

Remotely: stop the absence order.

Locally: change the knob position, then return it to the required

position.

Domotic functions

With the TYDOM 520 radio option, up to 16 domotics pro-

ducts can be associated (door/window magnetic contacts,

telephone transmitter, alarm control unit, remote controls, etc.)

using the DRIVER CPL.

Operation with a door/window

magnetic contact

You can combine up to 16 door/window

magnetic contacts (maximum number of

domotics products that can be combined).

If one of them is opened, DRIVER CPL sets

the installation to Frost Protection mode.

Operation with a TYXIA Transmitter

For this type of operation, the DRIVER CPL

must be in automatic mode.

Pressing the button enables a comfort override with

automatic return at the next change of program.

Pressing the button enables an economy override with

automatic return at the next change of program.

The override can be cancelled by pressing a button or turning

the selector of the DRIVER CPL.

DRIVER 230 CPL can be associated with a power line carrier

telephone remote control (e.g.

TYPHONE 2 CPL

) or a

GECPL1

whose telephone remote control input is connected to a

TYPHONE 2 to enable remote selection between the absence

mode and automatic operation.

Remote controlled absence mode

(Frost Protection)

Operation with a Tydom 200

remote control

From the home domain :

You can shut down the installation by pressing

the tactile button .

This shutdown command is cancelled:

- either by pressing the button ,

- or by changing the position of the DRIVER CPL selector.

In the AUTO position of the DRIVER CPL only:

Pressing the tactile button or

once enables an override operation

The override is cancelled:

By zone:

- the next time the program switches over in the zone,

- by pressing the , or button of the DRIVER CPL.

On the 3 zones:

- by changing the position of the DRIVER CPL selector.

- by pressing the , or button of the TYDOM 200.

- 1 -- 1 -

Domotic functions

Operation with a TYDOM 300 telephone

transmitter

By calling the TYDOM 300 telephone transmitter, let the

synthetic voice guide you to determine or modify the status

of the heating system (see the TYDOM 300 transmitter

guide).

If a change is made via the TYDOM 300

telephone transmitter, the DRIVER CPL

displays the telephone symbol and the mode

controlled (e.g. comfort).

Change the position of the DRIVER CPL to return to normal

operation.

Operation with a TYXAL alarm

control unit

The DRIVER CPL receives and displays the “technical fault”

information of the TYXAL alarm control unit. If a fault occurs,

the display flashes alternately with the current program for 2

minutes and indicates:

1. Intruder or technical alarm

2.Tamper alarm

3. Battery

4. Supervision

5. Open entry

6. Mains fault in progress

7.Technical fault in progress

- 15 -- 14 -

Domotic functions Maintenance

Nothing isdisplayed

on the room unit screen.

The symbol isdisplayed.

You have just switched the unit on.

There isno power supply

Check your circuit breaker.

An economy period interrupts

automatic operation.

The reduced tariff operating mode can

be modified (§ Price Programming).

Overrides are permitted.

Youcannot access the Comfort.

-1°C and Comfort -2°C

operating modes.

You have 4 order pilot wire heatingor

it hasbeen defined assuch (see

installation guide § Allocation

of receivers).

• Communication fault with the GECPL1

or GPCPL.

Check the power supply of the GECPL1

or GP4 CPL or reconfigure your units.

• Communication fault with electronic

meter.

Check the connection between the

electronic meter and the energy manager

or contact your installer.

• Communication fault with the

TYPHONE 2 CPL.

Check the power supply of theTYPHONE 2

CPL or reconfigure your units (see

installation guide, § Allocation of receivers).

Diagnosis/Solutions

The equipment

displays:

The equipment

displays:

The equipment

displays:

Override according to the alarm status

In the AUTO position only and if the function(1) is activated:

- Starting up the control unit fully sets the installation to

Economy mode in the 3 zones (up to the next change of pro-

gram).

- Shutting down the control unit sets the installation to

Comfort mode in the 3 zones (up to the next change of pro-

gram).

The override is cancelled:

By zone:

- the next time the program switches over in the zone,

- by pressing the , or button of the DRIVER CPL.

On the 3 zones:

- by changing the position of the DRIVER CPL selector.

(1) The override function is enabled by default depending on

the status of the alarm, it can be deactivated during the radio

configuration:

From the radio screen, press the buttons and together

to display ON or OFF. Release.

Press or to select

ON or OFF.

After 2 seconds without

pressing, the screen of the DRIVER CPL returns to the radio

display, press the DRIVER CPL button until the time

displays.

Table of contents

Other DELTA DORE Thermostat manuals

DELTA DORE

DELTA DORE RADIO DIANA D10 - GUIDE D User manual

DELTA DORE

DELTA DORE TYBOX 610 User manual

DELTA DORE

DELTA DORE D10 User manual

DELTA DORE

DELTA DORE Tybox 1117 User manual

DELTA DORE

DELTA DORE Diana D20 User manual

DELTA DORE

DELTA DORE Pack TYBOX 137 User manual

DELTA DORE

DELTA DORE CALYBOX 110 User manual

DELTA DORE

DELTA DORE TYBOX 5100 User manual

DELTA DORE

DELTA DORE DELTA 200 User manual

DELTA DORE

DELTA DORE Connected Tybox 5100 Pack User manual

DELTA DORE

DELTA DORE TYBOX 610 User manual

DELTA DORE

DELTA DORE DRIVER 620 User manual

DELTA DORE

DELTA DORE DRIVER 610 User manual

DELTA DORE

DELTA DORE MINOR 11 User manual

DELTA DORE

DELTA DORE DELTA 8000 MASTER User manual

DELTA DORE

DELTA DORE TYBOX 5100 User manual

DELTA DORE

DELTA DORE Tybox 1117 User manual

DELTA DORE

DELTA DORE PACK TYBOX 5000 User manual

DELTA DORE

DELTA DORE TYBOX 5150 User manual

DELTA DORE

DELTA DORE TYBOX 117 User manual

DELTA DORE

DELTA DORE TYBOX 117 User manual

DELTA DORE

DELTA DORE TYBOX 21 User manual

DELTA DORE

DELTA DORE TYBOX B+ User manual

DELTA DORE

DELTA DORE D10 W RF User manual

Popular Thermostat manuals by other brands

EWELLY

EWELLY EW-181 manual

Prolon

Prolon T1100 Hardware guide

Computherm

Computherm Q20 operating instructions

Heatmiser

Heatmiser neoStat user manual

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA user manual

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat user manual

Saswell

Saswell SAS920XWHB-7-S-RF User manual and warranty card

Aircalo

Aircalo TFP1-ET85P2 operating manual

Honeywell

Honeywell CM721 user manual

Carrier

Carrier DEBONAIR 33CS Installation and operating instructions

Lennox

Lennox iHarmony Zone Thermostat Installation and setup guide

Gemtech

Gemtech GT7000 Operation

Rollei

Rollei Smartes 45000 manual

Sinope

Sinope TH1300RF user guide

Honeywell

Honeywell RLV4305 owner's guide

Honeywell

Honeywell Prestige 2.0 THX9421 manual

NuTone

NuTone NTBZ48 Installation & operation guide

Stelpro

Stelpro MAESTRO ASMT402AD user guide