DediProg NuProg-E User manual
NuProg-E
Engineering UFS/eMMC
Programmer User Manual
Version 2.0
DediProg User Manual 09/2019
©DediProg Technology Co., Ltd. 2019 All rights reserved.
NuProg-E User Manual
www.dediprog.com 2
Table of Contents
I. INTRODUCTION ............................................................................................................................... 4
II. PRODUCT INFORMATION................................................................................................................. 4
III. SYSTEM REQUIREMENT ................................................................................................................... 5
IV. PRODUCT DESCRIPTIONS ................................................................................................................. 6
4.1 EXTERIOR ................................................................................................................................................. 6
4.2 INSTALL SOCKET ADAPTOR........................................................................................................................... 7
V. DEDIWARE QUICK INSTALLATION .................................................................................................... 8
5.1 SOFTWARE INSTALLATION............................................................................................................................ 8
5.2 INSTALL NUPROG-E PROGRAMMER............................................................................................................. 11
5.3 NUPROG INSTALLATION GUIDE (UFS PART).................................................................................................. 11
A. Main Menu and Functions..................................................................................................................... 12
B. LOG Window.......................................................................................................................................... 26
C. Programmer Information ...................................................................................................................... 26
D. IC Information........................................................................................................................................ 26
E. CheckSum Data...................................................................................................................................... 27
F. Batch Config Setting. ............................................................................................................................. 27
5.4 PRECAUTIONS WHEN USING NUPROG-E (FOR UFS) SOFTWARE ........................................................................ 36
5.5 NUPROG INSTALLATION GUIDE (EMMC PART).............................................................................................. 37
A. Main Menu and Functions..................................................................................................................... 38
B. LOG Window.......................................................................................................................................... 49
C. Programmer Information ...................................................................................................................... 49
D. IC Information........................................................................................................................................ 50
E. CheckSum Data...................................................................................................................................... 50
F. Batch Setting ......................................................................................................................................... 50
VI. REVISED EDITION ........................................................................................................................... 51
NuProg-E User Manual
www.dediprog.com 3
Important notice:
This document is provided as a guideline and must not be disclosed without consent of
DediProg. However, no responsibility is assumed for errors that might appear. DediProg
reserves the right to make any changes to the product and/or the specification at any
time without notice. No part of this document may be copied or reproduced in any
form or by any means without prior written consent of DediProg.
NuProg-E User Manual
www.dediprog.com 4
I. Introduction
This user manual is mainly introducing the hardware specifications, applications and the
software quick installation. NuProg-E is an engineering programmer that is innovated for
programming mass flash storage, such as UFS and eMMC. For UFS, it provides the basic
LUN and RPMB read and write as well as the settings for descriptors, attributes and flags.
As for eMMC, it supports User Area, Boot 1/2 and RPMB basic read and write; also
supports ExtCSD, GPP1~4 partition, read and write, as well as enhanced mode setting.
With the high speed USB 3.0, the NuProg-E is the finest programmer for UFS and eMMC
development. For more information, please visit our website.
www.dediprog.com/download
II. Product Information
High Speed Programming
With high speed processor, programming speed will increase greatly.
UFS Write speeds: 70~80MB/s; Read speeds: 60~75MB/s (Depends on computer
and IC performance).
Time reference: It will only take 20 seconds to write a 1GB file into a Toshiba UFS IC
Support UFS and eMMC/eMCP Settings and Programs
UFS part
Support Descriptors, Attributes, Flags settings
Support LUN configured, advance settings, and RPMB
eMMC part
Support User Area, Boot1/2 Partition and Extend CSD
Support RPMB, GPP1~4 and Enhanced mode
Support all IC package
Support standard package of UFS and eMMC (BGA153 (11.5x13mm)) or special
package of UMCP and eMCP.
Regular Software Update
Palm Size and Space Saving
Dimension: 132 x 75 x 30 mm Weight: 104g
Support USB 2.0 and USB 3.0 (Power adapter is required*)
*It is recommended to plug in the power adapter first, and then the USB cable.
NuProg-E User Manual
www.dediprog.com 5
III. System Requirement
CPU:
Intel i5 or Above
OS:
Windows 7/8/8.1/10
USB Port:
USB 2.0 and USB 3.0
Free Dish Space:
At least twice of the programming memory
CD ROM:
It is necessary for installing the software
*Since UFS and eMMC have mass volumes, please reserve enough space for buffering.
*Computer performances will affect the read and write speed of UFS, please choose a computer
that has higher CPU and better performance.
NuProg-E User Manual
www.dediprog.com 6
IV. Product Descriptions
4.1 Exterior
A. Power Signal Light
E. Power Connector
C. Programming Socket Sites
D. Start Button
B. Operation Lights
F. USB 3.0 Port
Fig. 4-1
Fig. 4-2
NuProg-E User Manual
www.dediprog.com 7
A. Power Signal Light
The light indicates the programmer is powered on.
B. Operation Lights
Red LED (Error): Error; programming has failed.
Yellow LED (Busy): The programmer is operating.
Green LED (Pass): Passed; the programming has completed successfully.
C. Programming Socket Sites
Built-in high speed connector, which is for installing socket adaptor.
D. Start Button
Not available now.
E. Power Connector
External power inputs (In order to make it more stable, please make sure the
power adapter is connected, and it is recommended to connect the power first,
and then plug in USB cable.)
F. USB 3.0 Port
For connecting programmer with the computer.
4.2 Install Socket Adaptor
Place an IC into the socket adaptor and attach the adaptor to the socket site.
Fig. 4-3
Socket Adaptor
Socket Site
NuProg-E User Manual
www.dediprog.com 9
5.1.2 When you install NuProg-E software for the first time, please install
the USB Driver. Otherwise, the computer will not be able to recognize the
programmer.
Fig. 5-3
Fig. 5-2
NuProg-E User Manual
www.dediprog.com 10
5.1.3 After installation, Dediware and NuProg icons will appear on the
desktop. The Dediware icon is for StarProg and ProgMaster series
programmer while the NuProg icon is for NuProg-E programming.
There is another icon called DediWare_CLI; it is the Command Line software
for StarProg Series programmers, so it does not support NuProg series.
StarProg/ProgMaster
Fig. 5-4
Fig. 5-5
NuProg-E
Other manuals for NuProg-E
1
Table of contents
Other DediProg Motherboard manuals
DediProg
DediProg SF600 Instruction Manual
DediProg
DediProg NuProg-E User manual
DediProg
DediProg StarProg-ATE User manual
DediProg
DediProg NuProg-E2 User manual
DediProg
DediProg NuProg-F8 User manual
DediProg
DediProg NuProgPlus-U8 User manual
DediProg
DediProg StarProg Series User manual
DediProg
DediProg StarProg-ATE User manual
DediProg
DediProg StarProg-A User manual
DediProg
DediProg SF600 User manual
